• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.740-745
• /
• 2016

선박에는 아주 많은 기계와 장비들이 설치가 되고 이를 운용하고 제어하기 위해 수천에서 수만 가닥의 cable이 설치된다. 이러한 cable들이 복잡하게 설치되기 때문에 정확한 최단 경로 데이터가 필요하다. 하지만 cable 최단 경로를 찾기 위한 일반적인 방법인 다익스트라 알고리즘을 사용하더라도 최단 경로 내에는 반드시 overfill 구간이 생기게 마련이다. 이를 해결하기 위해 설계자는 각 구간마다 cable 점유율을 확인하지만 점유율은 data sheet 형태로 존재하기 때문에 3D cable way 모델상의 육안 식별이 어렵다. 이를 해결하기 위해 본 논문에서는 3D CAD 상에서 cable 점유율 범위에 따라 cable 경로 색상을 다르게 표현함으로써 시각적으로 overfill 구간과 cable 경로를 바로 확인이 가능하도록 cable 경로 및 overfill 가시화 시스템을 제안 구현 하였다. 이를 통해 설계단계에서 overfill 구간을 쉽게 확인할 수 있고 정확한 회피경로의 산출과 최단경로 검증이 이루어져 설치 현장에 정확한 정보가 전달됨에 따라 재작업 비율이 감소하여 작업시간이 전체 7,000 시간에서 5,600 시간으로 단축 되었고 추가로 자재비 절감 효과를 얻을 수 있다.

• Structural Engineering and Mechanics
• /
• 제90권3호
• /
• pp.253-261
• /
• 2024

This research explores a new finite element model for the free vibration analysis of bi-directional functionally graded (BDFG) beams. The model is based on an efficient higher-order shear deformation beam theory that incorporates a trigonometric warping function for both transverse shear deformation and stress to guarantee traction-free boundary conditions without the necessity of shear correction factors. The proposed two-node beam element has three degrees of freedom per node, and the inter-element continuity is retained using both C1 and C0 continuities for kinematics variables. In addition, the mechanical properties of the (BDFG) beam vary gradually and smoothly in both the in-plane and out-of-plane beam's directions according to an exponential power-law distribution. The highly elevated performance of the developed model is shown by comparing it to conceptual frameworks and solution procedures. Detailed numerical investigations are also conducted to examine the impact of boundary conditions, the bi-directional gradient indices, and the slenderness ratio on the free vibration response of BDFG beams. The suggested finite element beam model is an excellent potential tool for the design and the mechanical behavior estimation of BDFG structures.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.61-66
• /
• 2011

According to recent figures, 35% of the world's blades are made using prepreg blades, by Vestas and Gamesa. They are the most advanced in the market today. In this study, we investigated the validity of the finite element method (FEM) applied to an FE analysis of a hybrid composite wind-turbine blade. Two methods were suggested for a composite FE analysis: using the equivalent properties of the composite or using stacking properties. FE analysis results using the stacking properties of the composite were in good agreement with results of using the equivalent properties. The difference between FE results was approximately 0.6~13.3%.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.222-229
• /
• 2003

The purpose of this study is to evaluate the mechanical properties of 6061 Al foams, which were fabricated by P/M and multi-step induction heating method, and to build the database, which is needed for computer aided modeling or foam components design. Aluminium foams, consisting of solid aluminium and large quantities of porosities, is widely used in automotive, aerospace, naval as well as functional applications because of its high stiffness at very low density, high impact energy absorption, heat and fire resistance, and greater thermal stability than any organic material. In this study, 6061 Al foams were fabricated for variation of fraction of porosities (%) according to porosities (%)-final heating temperature ( $T_{a3}$) curves. Mechanical properties such as compressive strength, energy absorption capacity, and efficiency were investigated to evaluate the feasibility of foams as crash energy absorbing components. Moreover, effect of the surface skin thickness on plateau stress and strain sensitivity of the 6061 Al foams with low porosities (%) were studied.d.

• 공학교육연구
• /
• 제16권1호
• /
• pp.54-63
• /
• 2013

This study aims to investigate relationships among self-directed learning readiness [SDLR], prerequisite mathematics test score and achievement level in college mathematics. For this purpose, the adjusted SDLRS (self-directed learning readiness scale) of Guglielmino's model, the score of mathematics diagnostic assesment and first semester college mathematics score among 424 freshmen students of engineering department of D university in 2011 were used and analyzed. Research results are as follows: Firstly, freshmen of engineering department had average level of SDLR, though they showed relative low level of self-direction, passion and time control ability. Secondly, considering SDLR with the mathematics diagnostic assesment score (3 groups: high, middle, low), there were no statistically significant differences. Thirdly, concerning SDLR according to the achievement level in college mathematics, a group which acquired good achievement showed higher level of SDLR compared with middle or lowachievement group. Differences among three groups were statistically significant. Lastly, there were affirmative relationships between SDLR, mathematics diagnostic assesment score and achievement in college mathematics. Furthermore, mathematics diagnostic assesment score and achievement level in college mathematics were found to be the most closely related. Based on the results, we suggest strategies to elevate SDLR of engineering department students and improve their achievement in college mathematics.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.153-159
• /
• 2021

Purpose: The purpose of this study was to assess the fitness of anterior and posterior interim crowns fabricated by three different additive manufacturing technologies. Methods: The working model was digitized, and single crowns (maxillary right central incisor and maxillary right first molar) were designed using computer-aided design software (DentalCad 2.2; exocad). On each abutment, interim crowns (n=60) were fabricated using three types of additive manufacturing technologies. Then, the abutment appearance and internal scan data of the interim crown was obtained using an intraoral scanner. The fitness of the interim crowns were evaluated by using the superimposition of the three-dimensional scan data (Geomagic Control X; 3D Systems). The one-way analysis of variance and Tukey posterior test were used to compare the results among groups (α=0.05). Results: A significant difference was found in the fitness of the interim crowns according to the type of additive manufacturing technology (p<0.05). The posterior interim crown showed smaller root mean square value than the anterior interim crown. Conclusion: Since the fitness of the posterior interim crown produced by three types of additive manufacturing technology were all within clinically acceptable range (<120 ㎛), it can be sufficiently used for the fabrication of interim crowns.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.79-92
• /
• 2002

This paper describes a research work of developing computer-aided design of a product with bending and piercing for progressive working. An approach to the system for progressive working is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, strip layout and die layout modules. The system is designed by considering several factors, such as bending sequences by fuzzy set theory, complexities of blank geometry, punch profiles, and the availability of a press equipment. Strip layout drawing generated in the strip layout module is presented in 3-D graphic farms, including bending sequences and piercing processes with punch profiles divided into for external area. The die layout module carries out die design for each process obtained from the results of the strip layout. Results obtained using the modules enable the manufacturer for progressive working of electric products to be more efficient in this field.

• 대한치과기공학회지
• /
• 제46권1호
• /
• pp.1-7
• /
• 2024

Purpose: The goal of this study was to determine the clinical acceptability of various cement space settings for the marginal and internal fit of a zirconia core manufactured using additive manufacturing. Methods: The maxillary right incisor served as the master model. After scanning the maxillary right incisor with a dental 3D (three-dimensional) scanner, the stereo lithography file was created using different cement space settings of 40, 120, and 200 ㎛ using computer-aided design software (Dental System 2018; 3Shape). The marginal and internal fit of the 3 groups were determined using the silicon replica technique. Measurement points were divided into the following three categories: margin, axial wall, and incisal. To ensure more accurate measurements, these three measurement points were divided into 8 points. The Shapiro-Wilk, one-way ANOVA, and Tukey's honestly significant difference test (for all tests α=0.05) were the statistical analyses that were included in the study. Results: The CS (cement space)-200 group had better marginal and internal fit than the CS-40 and CS-120 groups, and there were statistically significant differences at the marginal and incisal points, except for the axial wall points. CS-200 group, both marginal and internal fit were within 120 ㎛, which is the clinically acceptable value. Conclusion: This study suggests that a 200 ㎛ cement space setting is ideal for optimal marginal and internal fit of 3D-printed ceramic crowns.

• Journal of Astronomy and Space Sciences
• /
• 제31권2호
• /
• pp.177-186
• /
• 2014

The Immersion Grating Infrared Spectrometer (IGRINS) is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG Focal Plane Array (H2RG FPA) detectors. We present the design and fabrication of the detector mount for the H2RG detector. The detector mount consists of a detector housing, an ASIC housing, a Field Flattener Lens (FFL) mount, and a support base frame. The detector and the ASIC housing should be kept at 65 K and the support base frame at 130 K. Therefore they are thermally isolated by the support made of GFRP material. The detector mount is designed so that it has features of fine adjusting the position of the detector surface in the optical axis and of fine adjusting yaw and pitch angles in order to utilize as an optical system alignment compensator. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the structural and thermal analysis, the designed detector mount meets an optical stability tolerance and system thermal requirements. Actual detector mount fabricated based on the design has been installed into the IGRINS cryostat and successfully passed a vacuum test and a cold test.

• 대한전자공학회논문지TC
• /
• 제38권4호
• /
• pp.11-17
• /
• 2001

본 논문에서는 High-Order QAM(Quandrature Amplitude Modulation)을 적용하는 모뎀에서 강인하고 넓은 범위의 주파수 포착 범위를 가지는 극성판단(Polarity Decision) 반송파 동기용 PD(Phase Detector) 알고리즘을 제안하고 이에 대한 평균 출력특성(S-curve)과 분산특성을 수학적으로 유도하여 기존의 DD(Decision Directed)방식과 비교 분석한다. 기존의 DD 방식의 선형영역은 256 QAM의 경우 $3.5^{\circ}{\sim}3.5^{\circ}$ 이었으나 제안한 알고리즘의 선형영역은 ${\gamma}-17.9$에서 $36^{\circ}{\sim}36^{\circ}$ 의 넓은 구간을 가진다. 또한 기존의 DD 방식에서는 256 QAM의 주파수 오프셋 포착 성능이 ${\pm}10\;KHz$ 이하였다. 이는 아날로그 front-end 회로에서 주파수 오프셋이 일반적으로 ${\pm}100\;KHz$ 정도까지 줄어들 수 잇는 것을 감안하면 AFC(Automatic Frequency Control) 또는 반송파 복구를 위한 보조적인 위상검출회로가 필요하게 됨을 의미한다. 그러나 제안된 극성판단 반송파 동기 알고리즘을 사용하면 보조적인 회로의 도움없이 SNR = 30 dB에서 최대 ${\pm}300\;KHz$의 주파수 오프셋까지도 포착 가능하다.