• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.59-66
• /
• 2019

In this study, we developed a novel laser sintering deposition system (LSDS) based on solid free-form fabrication (SFF) technology as it has the potential to fabricate complex geometries with controllable architecture for bone tissue engineering applications. The 3D biphasic calcium phosphate (BCP) scaffolds were fabricated with a pore size of 800㎛, a line width and height of 1000㎛, and an overall size of 8.2×8.2×8.0 mm3 according to the design of experiment (DOE) results. Additionally, an optimized manufacturing process using response surface analysis was established to fabricate 3D BCP scaffolds. The fabricated 3D BCP scaffolds were sintered at 950℃, 1050℃, 1150℃, and 1250℃ according to sintering processes with a furnace. As the sintering temperature increased, the porosity increased. Through the compressive strength test, the 3D BCP scaffolds sintered at 1050℃ presented good results of about 0.76 MPa. These results suggest that fabrication methods for 3D bioceramic scaffolds using LSDS may meet the basic requirements for bone tissue engineering.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.3
• /
• pp.82-88
• /
• 2014

The government expands its investment on R&D programs for economic growth, thus there is growing attention on the result of R&D Programs. This study proposes more improved measuring method for efficiency when the number of R&D programs is not enough to be for measuring efficiency analysis. It provides more various application method of factors on efficiency analysis. This study analyzes the influence of each input factor on efficiency by using partial efficiency concept. And it also determines input factors in similar influence throughout Spearman correlation coefficient. Finally, it suggests new method to improve discriminatory power of efficiency analysis by determining representative factors. Also, the proposed method can be practiced not only for national R&D programs, but also for other fields of research.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.134-135
• /
• 2002

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.393-397
• /
• 1997

본 연구에서는 손동작(Hand Motion)과 수작업(Manual Task) 분석에 VR환경에서 사용되는 각도 측정 장갑(3-D Glove)을 이용하는 방법을 제안하였다. 본 연구에서 개발된 손동작(Hand Motion)과 수작업(Manual Task)의 분석 시스템은 18-sensor $Cyberglove^{TM}$정 시스템으로부터 측정된 angle data를 기초로 손동작이나 수작업에 대한 totalmuscle moment값과 total muscle excursion값을 구하고, digit와 joint의 moment값을 X,Y.Z방향별고 구하는 기능을 가지고 있다. 시스템의 구성은 : (1) $Cyberglove^{TM}$ System과 분석 시스템의 digital data 처리를 기반으로 하는 손동작의 측정 시스템 ; (2) $Cyberglove^{TM}$ System에서 얻어진 자료를 바탕으로 3차원 공간에서 손동작을 표현할 수 있는 Kinematic Hand Model ; (3) Hand Model과 $Cyberglove^{TM}$ Systme을 기반으로 3차원에서 손동작의 역학적 분석을 할 수 있는 3-D Hand Biomechanical Model ; 등으로 되어있다. 본 시스템은 Telerobotics, Medicine, Virtual Reality 등 다양한 분야에 응용이 가능하며, 수작업에 관련되는 Product Design, Manual Control Device, Computer I/O Device의 설계에도 도움이 될 것으로 기대된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.131-137
• /
• 2016

In this paper, we analyze the impedance analysis of vertical interconnection through-silicon vias (TSV) that is being studied for the purpose of improving the degree of integration and an electric feature in 3D IC. Also, it is to improve the performance and the degree of integration of the three-dimensional integrated circuit system which can exceed the limits of conventional two-dimensional a IC. In the future, TSV technology in full-chip 3-dimensional integrated circuit system design is very important, and a study on the electrical characteristics of the TSV for high-density and high-bandwidth system design is very important. Therefore, we study analyze the impedance influence of the TSV in accordance with the distance and frequency in a multiple TSV-to-TSV for the purpose of designing a full-chip three-dimensional IC. The results of this study also are applicable to semiconductor process tools and designed for the manufacture of a full-chip 3D IC.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.121-126
• /
• 2002

The stereoscopic image is that we can see it closer than a real thing compared to 2D image, and it has influence on human's vision information because it is more natural method to feel connections between the spaces of the image and himself. There are several method convert from 2d image to 3d image. But, in this paper, we are propose the image separate algorithm of continuous input system through a spatial analysis, not be done with 2D still image. Additionally, we will adapt to the moving vector which has been used in MPEG. In this experiment, we obtained the effect of 3D image.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.703-714
• /
• 2002

This paper proposed the basic consideration for the reliable 3-D measurement and analysis of middle-aged women's breast using 3-D phase-shifting moire topography. The surface borderline of the breast based on the anatomical structure on the skin was suggested. Various breast dimensions that can be measured using 3-D measurement system and their measuring methods were discussed. Tips for the measurement of sagged breast were also proposed. It is expected that these basic considerations contribute to draw attention to the reliable measurement of women's breast and provide a kind of tools for the standardization of 3-D shape measurement of breast.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.275-279
• /
• 2016

Additive manufacturing or 3D printing is a new manufacturing process and its application is getting growth. However, the product qualities such as mechanical strength, dimensional accuracy, and surface quality are low compared with conventional manufacturing process such as molding and machining. In this study not only mechanical characteristics of polymer sandwich panel having three dimensional core layer but also mechanical characteristics of core layer itself were analyzed. The shape of three dimensional core layer was pyramidal kagome structure. This core layer was fabricated by two different methods, injection molding with PP resin and material jetting type 3D printing with acrylic photo curable resin. The material for face sheets in the polymer sandwich panel was PP. Maximum load, stiffness, and elongation at break were examined for core layers fabricated by two different methods and also assembled polymer sandwich panels. 3D printed core showed brittle behavior, but the brittleness decreased in polymer sandwich panel containing 3D printed core. The availability of 3D printed article for the three dimensional core layer of polymer sandwich panel was verified.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.3
• /
• pp.207-231
• /
• 2008

Domestic and foreign research institutions what give speciality information to public of the field of science wish to plan of their continuos development for providing efficient information about various science-technology information. new database system, expasion of acquisition information. making a new information service system of user etc. This article indicates wish to contribute ideal National R&D formation system establishment as analyzed and researched into the present state of R&D information system construction of the representative institutions in three countries such as Korea(NTIS), the U.S.(NTIS), and Japan(JST) for efficiently management about present management system of information service of R.O.K.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.90-95
• /
• 2014

The system design and the system performance analysis of 3D imaging laser radar system for the mapping purpose is addressed in this article. For the mapping, a push-bloom scanning method is utilized. The pulsed fiber laser with high pulse energy and high pulse repetition rate is used for the light source of laser radar system. The high sensitive linear mode InGaAs avalanche photo-diode is used for the laser receiver module. The time-of-flight of laser pulse from the laser to the receiver is calculated by using high speed FPGA based signal processing board. To reduce the walk error of laser pulse regardless of the intensity differences between pulses, the time of flight is measured from peak to peak of laser pulses. To get 3D image with a single pixel detector, Risley scanner which stirs the laser beam in an ellipsoidal pattern is used. The system laser energy budget characteristics is modeled using LADAR equation, from which the system performances such as the pulse detection probability, false alarm and etc. are analyzed and predicted. The test results of the system performances are acquired and compared with the predicted system performance. According to test results, all the system requirements are satisfied. The 3D image which was acquired by using the laser radar system is also presented in this article.