• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.327-329
• /
• 1999

본 논문은 3차원 유한요소 프로그램을 이용한 농형 유도전동기의 정자장을 해석한 것이다. 2차원영역에서 해석하기 어려운 누설 인덕턴스를 3차원으로 해석하여 설계 파라미터 선정에 도움을 주고자 하였다. 유도전동기의 공극 자속밀도 분포와 누설 자속밀도 분포를 고찰하고 1[turn]의 coil에 의해 발생하는 자속의 량과 전동기 내부로 통과하는 자속의 량을 비교하여 누설 인덕턴스를 계산할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.360-368
• /
• 1988

A 14 to 14.5 GHz low noise MIC amplifier is designed on the $Al_2$$O_3$ substrate. The amplifier which uses a GaAsMESFET developed at COMSAT Laboratories has been designed and optivized to have gain greater than 7dB and noise figure less than 2dB using Super-Compact program. Experimental results show that the gain of the amplifier is 7 to 7.7 dB, while noise figure is 3.8 to 4.3dB through the desired band.

• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.753-758
• /
• 2002

In this paper, low voltage 3V CMOS programmable gain amplifier(PGA) for using in the transmitter and receiver of ADSL analog front-end is designed. The designed receive PGA is connected with 1.1MHz continuous lowpass fillet and controls the gain from 0dB to 30dB. And also the transmitter PGA is connected with 138KHz lowpass filter and controls the gain from -15dB to 0dB. The gain of All PGAs can be programmed by digital logic circuits and main controller. The designed PGAs are verified using HSPICE simulation with $0.35\mu{m}$ CMOS parameter.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.25-32
• /
• 2007

In this paper, the abstract layer for motion capture system is designed and implemented to meet the various hardware and different capturing method. The abstract layer can offer the unified programming by providing device independent API(Application Programming Interface). The device drivers of the optical system and mechanical system are emulated to verify the designed abstract layer. The optical system employs the AOA Ole while the mechanical system uses BVH file. An application program is written to call the abstract layer functions to drive both optical and mechanical drivers and receive the frame data, simulated motion data, that are displayed sequentially on the computer screen by utilizing Direct3D.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1157-1163
• /
• 2009

In order to improve in quality and productivity using the CNC machine tools, it has been endeavored to elevate production process by adding supplementary axes(2 axes) to 2,3 axial CNC machine tools. It is because the movement between the progress of work in processed goods is remarkably decreased more than that of general CNC machine tools that productivity improvement with precision maintenance can be improved. VBScript in CAD/CAM is applied to utilize CNC machine tools added supplementary axes so that Multi-axial &Multi-process manufacturin g program can be conveniently drawn up. However, there is generally much skilful work and operation by the manual program of CAD(2.5D) and CNC machine tools in the filed. As a result of conducting an experiment by COM-filing VBScript at the spot of Insert Tip for milling Face Cutter in CAD/CAM Software(2.5D), it was not only timesaving to draw up program but also more convenient than complicated Multi CAD/CAM Software to approach and possible to program various products instantaneously.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.309-310
• /
• 2022

본 논문은 3차원 ELS 모델과 건설 프로젝트 관리 프로그램을 이용한 해체 공정을 기계식공법으로 해체하는 구조물에 적용한 사례이다. 해체 공정 설계를 위한 3차원 ELS 모델은 도면 및 현장 조사 통해 부재별 크기와 배근 정보를 확인하여 모델링하였다. 완성된 3차원 모델을 건설 프로젝트 관리 프로그램인 Bexel manager에 적용하여 부재 별 해체 공정을 설계하였다. 설계된 해체 공정은 기계식공법으로 해체하는 구조물에 적용하였고, 해체결과 작업 별 작업동선을 효과적으로 관리할 수 있었으며, 안전하게 해체를 완료하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.97-102
• /
• 2007

Recently, coastal damage according to the natural disaster like storm-surge, overflowing of the sea has been massively increased. In case of earth fill at the seaside, there are a lot of weak areas of the natural disaster and it has also high possibility that a large disaster happens. Thus flood expectation map in the reclaimed land using 3D spatial information was produced in this study. The area around Myungji, Kangsugu, Busan which was made with the large scale earth fils at the seaside was designated as a study area. Observation of both costal datum and ground height using the tidal date and field surveying dates was conducted. Terrain model using the GIS program was produced and than 3D building model was produced using 3D MAX. It was shown that there are possibility more than 50% if over 4.5m storm-surge is happening, as a result of calculating the virtual flooded area on the produced cartographic map.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.232-238
• /
• 2007

In this research, we constructed a 3D riverbed surveying system that is able to acquire the topographical information of a riverbed in real-time. The system consists of a RTK-GPS receiver and a echo sounder for collecting simultaneously the position and the water depth information of riverbed. A program for data composition and transformation was designed to generate the 3D coordinates by combining data of a GPS receiver and a echo sounder and made GIS database construction easy. We extracted TIN, digital elevation model and cross sectional maps of the riverbed by using GIS software from 3D data constructed through test surveying. It was shown that the accuracy of the result was RMS error of 0.069m when compared with the existing methods which use a total station and staffs. It is expected that the 3D riverbed surveying system wiil be able to be utilized to various surveying for water resources management in rivers, sea, dams, storing reservoirs and so forth.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.511-518
• /
• 2005

The behavior of steel curved bridges is more complicated than straight bridges, thus the analysis, design and construction process of curved bridges require much more attention. In design of curved bridges, the grillage analysis using general structural analysis program or special program is mainly used. Comparative study in coherence between these analytical results and actual behavior of curved bridges has been rarely conducted. To study the behaviour of curved bridges and verify the current design method, field measurements and analyses using general structural analysis program and 3-D refined analysis program were carried out for simple and continuous bridges in this study. The study focused on the behavior of curved steel bridges during construction. Measured and analytical results had quantitative difference mutually, but there were qualitatively similar. Stress variations in transverse direction of flange were observed and grillage analysis models yielded more conservative values than 3-D refined analysis models.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.329-330
• /
• 2011

3D 영상산업이 발전해 오면서 현재 3D 영상으로 가장 많이 사용되는 것이 바로 stereoscopic 영상이다. 이러한 영상은 인간의 뇌를 속임으로써 화면에 비쳐지는 영상이 마치 화면 밖에 위치하는 것 같은 착각을 일으키게 만들어 3D영상을 인식할 수 있게 해준다. 이때 사람이 양안시를 인식하는 문제에 관한 연구는 이미 안경학에서 많은 발전을 이루어 왔지만, 현재 논의의 중점인 3D 양안시력은 평소 사람이 사용하는 양안시가 아닌 3D Display에서 비춰지는 영상을 다양한 방법으로 양쪽 눈에 다른 영상을 인식하게 함으로써 입체를 인식하게 하는 것이며, 이러한 3D 양안시력을 측정하는 방법에 대해서는 기존의 양안시력과는 다른 측정 방법을 적용하여야 한다. 따라서 이 논문에서는 이러한 3D 입체 영상에 대한 입체시를 측정하는 방법에 대하여 제안한다.