• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.4 s.316
• /
• pp.28-35
• /
• 2007

Airbone laser altimeters have been utilized for 3D topographic mapping of the earth, moon, and planets with high resolution and accuracy, which is a rapidly growing remote sensing technique that measures the round-trip time emitted laser pulse to determine the topography. The traveling time from the laser scanner to the Earth's surface and back is directly related to the distance of the sensor to the ground. When there are several objects within the travel path of the laser pulse, the reflected laser pluses are distorted by surface variation within the footprint, generating multiple echoes because each target transforms the emitted pulse. The shapes of the received waveforms also contain important information about surface roughness, slope and reflectivity. Waveform processing algorithms parameterize and model the return signal resulting from the interaction of the transmitted laser pulse with the surface. Each of the multiple targets within the footprint can be identified. Assuming each response is gaussian, returns are modeled as a mixture gaussian distribution. Then, the parameters of the model are estimated by LMS Method or EM algorithm However, each response actually shows the skewness in the right side with the slowly decaying tail. For the application to require more accurate analysis, the tail information is to be quantified by an approach to decompose the tail. One method to handle with this problem is proposed in this study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.385-391
• /
• 2006

It is very important to make a decision for locating public facility site in a objectively way people in general agree with. This is because public facility affects not only daily life of people in there but also a regional development. This paper sets up a site selection model which utilize an accessibility theory and GIS spatial analysis techniques. This model has been applied to all the twelve alternatives of Chungnam Provincial Office (CPO) sites which are well known to the public. On the criterion of average access time from all the other areas in Chungnam Province, CH alternative is found to be the best one followed by CH/AS, AS alternatives. On the basis of total people-travel time CH/AS alternative turns out to be the best one followed by CH, AS alternatives. In conclusion top three best locations for CPO are CH and AS area where transportation facility are in good condition and population density is highest in Chungnam Province. This fact implies that a transportation accessibility and population density are the primary key in determining the location of public facility.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.39-58
• /
• 2019

This study performed the dam watershed storm runoff modeling using GPM(Global Precipitation Measurement) satellite rain and KIMSTORM2(KIneMatic wave STOrm Runoff Model 2) distributed model. For YongdamDam watershed(930㎢), three heavy rain events of 25th August 2014, 11th September 2017, and 26th June 2018 were selected and tested for 4 cases of spatial rainfalls such as (a) Kriging interpolated data using ground observed data at 7 stations, (b) original GPM data, (c) GPM corrected by CM(Conditional Merging), and GPM corrected by GDA(Geographical Differential Analysis). For the 4 kinds of data(Kriging, GPM, CM-GPM, and GDA-GPM), the KIMSTORM2 was calibrated respectively using the observed flood discharges at 3 water level gauge stations(Cheoncheon, Donghyang, and Yongdam) with parameters of initial soil moisture contents, stream Manning's roughness coefficient, and effective hydraulic conductivity. The total average Nash-Sutcliffe efficiency(NSE) for the 3 events and 3 stations was 0.94, 0.90, 0.94, and 0.94, determination coefficient(R²) was 0.96, 0.92, 0.97 and 0.96, the volume conservation index(VCI) was 1.03, 1.01, 1.03 and 1.02 for Kriging, GPM, CM-GPM, and GDA-GPM applications respectively. The CM-GPM and GDA-GPM showed better results than the original GPM application for peak runoff and runoff volume simulations, and they improved NSE, R², and VCI results.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.376-391
• /
• 1998

Images from satellites will have 1 to 3 meter ground resolution and will be very useful for analyzing current status of earth surface. An image processing system named GeoWatch with more intelligent image processing algorithms has been designed and implemented to support the detailed analysis of the land surface using high-resolution satellite imagery. The GeoWatch is a valuable tool for satellite image processing such as digitizing, geometric correction using ground control points, interactive enhancement, various transforms, arithmetic operations, calculating vegetation indices. It can be used for investigating various facts such as the change detection, land cover classification, capacity estimation of the industrial complex, urban information extraction, etc. using more intelligent analysis method with a variety of visual techniques. The strong points of this system are flexible algorithm-save-method for efficient handling of large size images (e.g. full scenes), automatic menu generation and powerful visual programming environment. Most of the existing image processing systems use general graphic user interfaces. In this paper we adopted visual program language for remotely sensed image processing for its powerful programmability and ease of use. This system is an integrated raster/vector analysis system and equipped with many useful functions such as vector overlay, flight simulation, 3D display, and object modeling techniques, etc. In addition to the modules for image and digital signal processing, the system provides many other utilities such as a toolbox and an interactive image editor. This paper also presents several cases of image analysis methods with AI (Artificial Intelligent) technique and design concept for visual programming environment.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.95-102
• /
• 2012

This study has been conducted to characterize the relations between the accident rate and the overlap section elements where the horizontal alignment and vertical alignment are overlapped. The researches were performed on Horizontal curve sections of 4-lane highways with 100km/h of design speed and speed limit. Korea Highway Corporation's Geographic Figurative Information System was adopted for geometric organization and Highway Traffic Accident Statistics was used. The results reveal that sections made of a single slope without vertical curve has greater accident rate than those with vertical curve, and that sections with 1 vertical curve are higher in the accident rate than those with over 2 vertical curve. For the sections with 1 vertical curve, SAG sections are higher than CREST sections and for the previous straight section of horizontal curve are higher than curved ones. In particular, when the road surface is wet, the accident rate is closely related with SAG vertical curves or leftward horizontal curved sections. This study will have meanings that it proposes the importance of design of road alignment by taking consideration of 3D synthetic alignment conditions for improvement of the road safety.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.2
• /
• pp.138-146
• /
• 2006

To understand the status of water quality and work out a suitable countermeasures in Seonakdong watershed which has poor agro- environmental condition because of severe point and non-point source pollution by popularized city and near sea, we investigated the pollution sources and water quality from '03 and '05 and the result were mapped with GIS and RS for end-users's convenient comprehense and conjunction of water quality and geological data. The most degraded tributary was Hogeo stream which was affected directly by highly popularized Gimhae city, the main pollution source of the watershed. The pollution of tributaries in watershed increased the T-N of main body that reached over 4 mg/L during dry season. Pyeonggang stream and the lower part of main water way were suffered from high salt contents induced near sea and the EC value of those area were increased to 2.25 dS/m. The delivered loads of T-N and T-P were largest in Joman river as 56% and 61% of total delivered loads 1mm tributaries because of lots of stream flow. When Management mandate for irrigation water in Seonakdong river watershed was mapped for estimating integrated water quality as the basis of classification of EC and T-N contents in water, Hogeo and Shineo catchments were showed the requiring countermeasures none against nutrients hazard and Pyeonggang catchment was the vulnerable zone against nutrients and salts hazard. As the result, Seonakdong watershed had very various status of water quality by characteristics of catchments and countermeasures for improving water quality and crop productivity safely should changed depend on that.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.817-831
• /
• 2014

In this paper insights from studies on the middle income trap and value chains analyses are combined to investigate one particular industry in one particular region: the sugarcane industry in Northeastern Thailand. Focusing on this region enables an in-depth focus on geographical differentiation of the middle income trap. The empirical outcomes demonstrate that policymakers involved with sugar should look at the particular challenges in Northeastern Thailand: 1. The role of brokers which is unaddressed in the current regulatory environment; 2. A lack of information of the regulatory environment among growers; 3. Distrust between growers and millers; 4. Alack of implementation of R&D efforts; 5 .A lack of support from associations; 6. The labor shortage problem, and 7. No incentives for growers, brokers and millers to improve quality and embark on upgrading. Since agricultural value chains in Southeast Asia often start in relatively poor rural areas it is imperative that policymakers balance the interests of upstream, midstream and downstream actors. Unfortunately, this is rather difficult as midstream actors (millers) and wholesalers are powerful and therefore, are in the best position to defend their interests. Our insights could function as comparative material for similar studies within other Southeast Asian upstream value chains.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.13-13
• /
• 2023

디지털 기술은 오늘날 플랫폼과 디지털 트윈의 기술도입을 통해 현실 세계를 네트워크와 가상세계와의 연결이 통합되어진 가상 현실 세계의 입문 도약이다. 현실에서 가상현실의 사이의 디지털 전환(digital transformation)에는 디지털 기술과 솔루션을 비즈니스의 모든 영역에 통합하는 것이 포함된다. 이러한 디지털 전환의 핵심은 데이터에 관한 것이며, 데이터를 활용하여 가치를 창출하고 고객경험과 비즈니스 영역을 극대화하는 방식을 제공한다. 최적의 데이터를 제공하기 위한 플랫폼과 가상 현실세계 구현을 위한 디지털 트윈의 상호연계 관한 기본 개념은 데이터 수집, 데이터 분석, 데이터 시각화 및 데이터 보고와 같은 데이터 비즈니스이다. 현장 데이터는 디지털 양식을 통해 수집, 기록, 저장된다. 현장 IoT 기반 데이터(사진 및 비디오 매체 등)는 지속적으로 수집되고 종종 다른 데이터베이스에 저장되지만 지리 공간적 위치에 연결되지 않는다. 모든 디지털 발전을 조화시키고 지하수 데이터에서 더 빠른 이해를 도출하기 위해서는 디지털 트윈이 시작되어야 한다. 단일 지하수플랫폼에서 현장 조건을 시각화하고 실시간 데이터를 스트리밍하며, 과거 3D 데이터와 상호작용하여지질 또는 지화학 데이터를 선택적 사용을 위해 지하수 플랫폼과 디지털 트윈이 연계되어야 한다. 데이터를 디지털 정보모델과 연결하면 디지털 트윈에 생명을 불어넣을 수 있지만 디지털 트윈의 가치를 극대화하려면 여전히 데이터 플랫폼 서비스와 전달 방식을 선택해야 한다. 지하수 플랫폼동시성을 갖는 디지털 트윈은 정적 및 동적 데이터를 저장하는 데이터베이스 또는 크라우드 서비스에서 데이터를 가져오는 API(애플리케이션 프로그래밍 인터레이스), 디지털 트윈을 위한 호스팅 공간, 디지털 대상을 구축하는 소프트웨어, 구성 요소 간 읽기/쓰기를 위한 스크립트, chatGPT 및 API를 활용할 수 있다. 이를 통해 수집된 데이터의 실시간 양방향 통신기술인 지하수 플랫폼 기술을 활용하여 디지털 트윈을 적용하고 완성할 수 있고, 이를 지하수 분야에도 그대로 적용할 수 있다. 지하수 분야의 디지털 트윈 기술의 근간은 지하수 모니터링을 위한 관측장치와 이를 활용한 지하수 플랫폼의 구축 및 양방향 자료전송을 통한 분석 및 예측기술이다. 특히 낙동강과 같이 유역면적이 넓고 유역 내 지자체가 많아 이해관계가 다양하며, 가뭄과 홍수/태풍 등 기후위기에 따른 극한 기상이변가 자주 발생하고, 또한 보 및 하굿둑 개방 등 정부정책 이행에 따른 민원이 다수 발생하는 지역의 경우 하천과 유역에 대한 지하수 플랫폼과 디지털 트윈의 동시성 기술적용 시 지하수 데이터에 대한 고려가 반드시 수반되어야 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.375-382
• /
• 2020

As the 4th Industrial Revolution era in worldwide, interest in autonomous vehicles is increasing. but due to recent safety issues such as pedestrian accidents and car accidents, as a technical model for this, the demand for 3D HD maps (High Definition maps) is increasing in including lanes, road markings, road information, traffic lights and traffic signs etc. However, since some complementary points have been continuously raised according to demand, It is necessary to collect the opinions of institutions and companies utilizing HD maps and to improve HD maps. This study was conducted by utilizing the results of the contest for usability verification of HD Maps hosted by the National Geographic Information Institute and organized by the Spatial Information Industry Promotion Institute. For this study, we researched HD maps' layers and codes for HD maps object usability to improve HD maps, constructed HD maps object usability items accordingly, and contested usability verification of HD maps according to the items The contestants conducted verification and analyzed the results. As a result, the most frequently used code for each layer was the flat intersection, and the code showing the highest usage rate was a safety sign. In addition, the use rate of the sub-section and height obstacles was 16.67% and 8.88%, respectively, showing a low ratio. In order to utilize HD maps in the future, this study is expected to require research to continuously collect opinions from customers and improve data objects and data models that are actually needed by customers.