• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.235-243
• /
• 2010

Three-dimensional structural analysis system for nuclear containment building is presented in this paper. This system includes high-performance plate/shell elements as finite element library. It also adopts numerical modeling technique for unbonded tendon as well as bonded tendon in prestressed concrete structures. This system is constructed by connecting several in-house program to a commercial program DIANA, and then is capable of performing nonlinear analysis for ultimate pressure capacity of nuclear containment building. Finally, three-dimensional structural analysis of CANDU-type containment building is carried out in order to test the reliability of this system. These numerical results are compared with reference values, which obtained from axisymmetric structural analysis.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.144-144
• /
• 2009

본 논문에서는 6가 크롬 도금의 대체 기술 중 하나인 3가 크롬 도금 공정 기술 개발에 있어 도금 소지인 Mg 합금에 온도, 전류 밀도 등의 도금 조건을 변경하여 도금 층의 두께와 형상, 미세조직 등을 분석, 최적의 도금 조건을 확인하였다. 또한 3가 크롬도금의 실 부품 적용 가능성을 검토하기 위해 상용 프로그램인 Solidworks와 Elsyca Platingmaster를 이용, 3D Hull Cell test를 전산 모사하고 실제 Hull Cell 도금과 비교 분석 하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.39-50
• /
• 2007

This paper presents 3D infinite elements for the elastodynamic problem with multi-layered half-space. Five different types of infinite elements are formulated by using approximate expressions of multiple wave components for the wave function in multi-layered soil media. They are horizontal, horizontal-corner, vortical, vertical-corner and vertical-horizontal-comer infinite elements. The elements can effectively be used for simulating wane radiation problems with multiple wave components. Numerical example analyses are presented for rigid disk, square footings and embedded footing on homogeneous and layered half-space. The numerical results show the effectiveness of the proposed infinite elements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.278-278
• /
• 2011

LCD 생산에 적용할 수 있는 대형 마그네트론 스퍼터 장비에서 공간적으로 불균일한 타겟 침식은 타겟의 사용 효율을 떨어뜨린다. 특히 직사각형의 외부 자석과 직선형태의 내부 자석 구조를 가진 마그네트론 스퍼터에서는 cross-corner 효과로 인해 국부적으로 일정 부분에 대한 상대적으로 높은 침식률이 문제가 된다. 이러한 문제를 해결하기 위해 국부적으로 자기장 세기를 바꾸는 시행착오를 통하여 실험적으로 문제를 해결하려는 방법이 있지만 비용 및 시간이 매우 많이 들어 전산모사를 통한 문제 해결 방법이 훨씬 유리하다. 우리는 몬테 카를로 방법에 기반한 3차원 입자 시뮬레이션을 통하여 마그네트론 스퍼터 장비를 모델링을 하였다. 직사각형의 외부와 직선형의 내부 자석 구조가 만들어 내는 정적인 공간 자기장의 분포는 OPERA3D를 이용하여 계산하였고, 플라즈마 입자들이 만들어내는 자기장에 의해 섭동영향을 받지 않는다고 가정하였다. 플라즈마 전기장 및 전하의 운동은 상호작용의 일관성이 유지되도록 계산하였다. 이온밀도의 공간분포는 내부 자석과 외부 자석 사이의 직선 부분 보다 cross-corner 효과가 일어나는 부분에서 상대적으로 더 높은 밀도분포를 보였다. 플라즈마 시뮬레이션을 통하여 얻은 타겟에 입사한 이온의 개수 및 속도에 대한 정보를 이용하여 타겟의 침식률을 계산하였다. 이러한 침식률을 계산하기 위한 시뮬레이션 기술은 산업용 대형 스퍼터 장비 연구 및 개발에 매우 효율적인 방법이 될 것이다.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.51-61
• /
• 2009

A Compton camera, which is based on the geometrical interpretation of Compton scattering, is a very promising gamma-ray imaging device considering its several advantages over the conventional gamma-ray imaging devices: high imaging sensitivity, 3-D imaging capability from a fixed position, multi-tracing functionality, and almost no limitation in photon energy. In the present study, a Monte Carlo-based, user-friendly Compton imaging simulator was developed in the form of a graphical user interface (GUI) based on Geant4 and $MATLAB^{TM}$. The simulator was tested against the experimental result of the double-scattering Compton camera, which is under development at Hanyang University in Korea. The imaging resolution of the simulated Compton image well agreed with that of the measured image. The imaging sensitivity of the measured data was 2~3 times higher than that of the simulated data, which is due to the fact that the measured data contains the random coincidence events. The performance of a stacking-structure type Compton camera was evaluated by using the simulator. The result shows that the Compton camera shows its highest performance when it uses 4 layers of scatterer detectors.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.106-115
• /
• 1996

본 연구에서는 PET(PentaEthoxy Tanatalum:Ta(OC2H5)5) 유기금속 화합물 전구체를 사용하여 차세대 초고집적회로 제조시 고유전체 물질로 유망한 Ta2O5 박막을 열화학증착 방법에 의하여 증착하였다. 본 증착실험을 통하여 여러 가지 운속기체, 기판온도, 반응압력 등의 공정변수가 층덮힘에 미치는 영향을 고찰하였으며 Monte Carlo 전산모사 결과와 기판온도 변화에 따른 층덮힘 패턴의 변화에 대한 실험결과를 비교하여 부착계수를 산출하였다. 운송기체로는 N2, Ar, He을 바꿔가며 실험하였으며 He>N2>Artns으로 층덮힘이 양호한 것으로 나타났다. 이는 운송기체의 종류에 따라 운동량 확산도, 열 확산도, 물질 확산도 등의 이동현상 특성값들이 다르기 때문이라 생각된다. 기판온도의 증가는 운송기체의 종류에 관계없이 층덮힘을 악화시켰으며 도랑내부에서의 Knudsen 확산과 표면반응물의 탈착에 비해 표면반응이 보다 지배적인 역할을 담당함을 알 수 있었다. 또한 질소를 운송기체로 사용한 경우에 부착계수의 겉보기 활성화 에너지는 15.9Kcal/mol로 나타났다. 그리고 3Torr 이하에서 반응압력이 증가하는 반응압력이 증가하는 경우에는 물질 확산도의 감소 효과 때문에 층덮힘이 악화되었다. 본 연구결과 3Torr, 35$0^{\circ}C$에서 He 운송기체를 이용한 경우가 가장 우수한 층덮힘을 얻을 수 있는 최적 공정 조건임을 알 수 있었다.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.500-507
• /
• 2004

This study was conducted to evaluate the equity of the flow distribution from rapid mixing basin to the flocculation basins. Also, several types of inlet structures of the open channel affecting the flow pattern and distribution trend were studied using Computational Fluid Dynamics (CFD) simulation. For investigating the factual phenomena in distribution channel, we selected a certain domestic water treatment plant with capacity of $361,000m^3/d$. From the measurements of flow discharge, it is investigated that this existing inlet geometry resulted in significant inequitable distribution. The both largest deviations in the basins and rows were over 10%. In order to reduce the these deviation, this study suggested installing a baffle against the influent, and showed the effectiveness which the largest deviation was less than 3%. Also, it was concluded that the existing design method of open channel could be improved by three-dimensional hydrodynamic analysis for optimizing the even flow.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.1-8
• /
• 2001

This study was carried out for the purpose of determination of maintenance period and investigation of weak point due to freeze when the gas heater of KOGAS valve station Is not operated in winter season. 3-dimensional non-linear numerical simulation was conducted in order to predict the time and location which bath water in heater reaches to ice point. FLUENT V 5.0, commercial code, is used for thermal fluid flow analysis. We thought this was problem of heat conduction solving the energy equation and modeled gas heater by using the real geometry and scale for performing the 3-dimensional simulation. It was analyzed complex heat transfer phenomena considering convection due to air on surface, conduction in insulation material, natural convection of liquid in heater and heat loss through the pipe.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2335-2341
• /
• 1999

The $2\times32$ coupler consists of Mach-Zehnder interferometer and Y branch coupler. For the designs of this coupler, three dimensional rectangular core waveguide decomposed to two-dimensional structure by the effective index method. To optimize the waveguide structure, the confinement factor was investigated with two-dimensional finite difference Beam Propagation Method. The $2\times32$ coupler fabricated by simulation with height between Mach-Zehnder arms, H=$43.6\mu\textrm{m}$(path difference $0.668\mu\textrm{m}$) was showed best characteristics. In the results of dry etching of core layer, the etching rate of core layer was above 2600${\AA}$/min, the etching ratio of SiO2 to Al mask was 30:1 and the uniformity of etching was $\pm$5%. The maximum insertion loss and the uniformity of $2\times32$ coupler were below 19.2dB, 2dB respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.3
• /
• pp.201-207
• /
• 2020

In this study, various types of porous beams were designed and analyzed to examine the relationship between the behavior of a porous beam and certain nonlocal parameters. The nonlocal parameters were defined as functions of the conditions of defects in the porous material. Finite element analysis was conducted on the beams under typical boundary and loading conditions. Beams with stiffeners having the same dimensions as the defects in the porous beams were also analyzed. The deformation tendency of these beams was determined and described in terms of the nonlocal parameters. The deformation of a porous beam was linearly proportional to the square of the diameters of the defects, whereas that of a beam with a stiffener was linearly proportional to the cube of the diameter of the stiffener. Furthermore, for a stiffened beam with axial loading, the results derived from a 3D solid element and those under 2D plane stress conditions were different.