• The Journal of the Petrological Society of Korea
• /
• v.11 no.2
• /
• pp.65-73
• /
• 2002

The wavy extinction of quartz grains can be used as a good indicator to show the degree of rock deformation. To determine degree of the rock deformation, intensity of wavy extinction (IWE) of quartz grains was measured by using polarizing microscope, digital camera, and NIH image (or Scion Image). In this experiment, the measurement was performed along the line perpendicular to the subgrain boundary of wavy extinction. IWE was measured when a quartz grain shows maximum extinction in polarizing microscope. NIH image was represented in terms of 256 gray-scale brightness, which was associated with intensity of the wavy extinction. IWE was determined by the degree of brightness versus the measuring length of a quartz grain. IWE was analysed in the distribution chart with the collection unit of 5. Regarding the characteristics of data distribution, the median between the mode and the median of the histogram is defined as a representative value for the IWE, and this value is subdivided into the five levels of rock deformation zones (lowest- or non-, low-, medium-, high-, and highest deformation) with their respective indices (D1, D2, D3, D4, and D5). The correlation between the Eonyang Granite and the Yangsan Fault was investigated by using the indices. The results indicate that IWE values decreased away from the fault.

• Applied Microscopy
• /
• v.36 no.3
• /
• pp.217-226
• /
• 2006

Image processing by ultra high voltage electron microscopy (UHVEM) and tomography has offered major contributions to research in the field of cellular ultrastructure. Furthermore, such advancements also have enabled the improved analysis of three-dimensional cellular structures in botany. In the present study. using UHVEM and tomography, we attempted to reconstruct the three-dimensional images of plastid inclusions that probably differentiate during photosynthesis. The foliar tissues were studied Primarily with the TEM and further examined with UHVEM. The spatial relationship between tubular elements and the thylakoidal membrane and/or starch grains within plastids mainly have been investigated in CAM-performing Sedum as well as in $C_4$ Salsola species. The inclusion bodies were found to occur only in early development in the former, while they were found only in mesophyll cells in the latter. The specimens were tilted every two degrees to obtain two-dimensional images with UHVEM and subsequently comparison has been made between the two types. Digital image processing was performed on the elements of the inclusion body using tilting, tomography, and IMOD program to generate and reconstruct three-dimensional images on the cellular level. In Sedum plastids, the inclusion bodies consisted of tubular elements exhibiting about 20 nm distance between elements. However, in Salsola, plastid inclusion bodies demonstrated quite different element structure, displaying pattern, and origin relative to those of the Sedum. The inclusion bodies had an integrative relationship with the starch grains in both species.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.3
• /
• pp.101-109
• /
• 2003

The wavy extinction of quartz can be used as a standard indicator showing the degree of rock deformation. In determine the degree of rock deformation, the intensity of wavy extinction (IWE) of quartz was measured using polarizing microscope, digital camera, and NIH Image program. This method was applied to the granite of Pocheon-Gisanri area, which are divided three type; biotite granite (Gb), garnet biotite granite (Ggb) and two mica granite (Gtm). In this study, measurement of wavy extinction was proceeded Ggb in eastern part and Gb in western part based on the Pocheoneup. The result was that Gb shows low deformation degree below D2, and Ggb represents high deformation degree above D3, generally showing that increasing deformation degree from northwest to southeast in the studied area. It is suggested that the fault which penetrated Ggb in 1/250,000 geological map affected the deformation degree of Ggb.

• Applied Microscopy
• /
• v.36 no.2
• /
• pp.73-82
• /
• 2006

Major contributions has been made in cellular ultrastructure studies with the use of high voltage electron microscopy (HVEM) and tomography. Applications of HVEM, accompanied by appropriate image processing, have provided great improvements in the analysis of three-dimensional cellular structures. In the present study, structural patterns of the crystalline bodies that are distinguished in mesophyll plastids of CAM-performing Sedum rotundifolium L., have been investigated using HVEM and tomography. Tilting, and diffraction pattern analysis were performed during the investigation. The titlting was performed at ${\pm}60^{\circ}\;with\;2^{\circ}$ increments while examining serial sections ranging from 0.125 to $1{\mu}m$ in thickness. The young plastids exhibited crystalline inclusion bodies that revealed a peculiar structural pattern. They were irregular in shape and also variable in size. Their structural attributes affected the plastid morphology. The body consisted of a large number of tubular elements, often reaching up to several thousand in number. The tubular elements typically aggregated to form a fluster The elements demonstrated either a parallel or lattice arrangement depending on the sectioning angle. The distance between the elements was approximately 20nm as demonstrated by the diffraction analysis. HVEM examination of the serial sections revealed an occasional fusion or branching of elements within the inclusion bodies. Finally, a three-dimensional reconstruction of the plastid crystalline bodies has been attempted using two different image processing methods.

• Applied Microscopy
• /
• v.33 no.3
• /
• pp.195-204
• /
• 2003

The Experimental calibration method has been investigated to correct d-spacing estimation and to identify phases in the electron diffraction data acquired by imaging plates. When the diffraction data from the imaging plate was corrected by the d-spacing calibration method with the radial intensity distribution plotting in this experiment, The accuracy of d-spacing estimation was significantly increased in errors of about 0.5%. The experimental calibration equation followed up the first order exponential decay function was derived from the trace of d-spacing deviation between the measured and the calculated values. It was applied to the analysis of d-spacing and the phase identification of the transitional phases formed from [001] gibbsite specimen by electron beam irradiation effect. In this case more accurate phase identification and d-spacing evaluation is possible for the transitional phases whose diffraction patterns are complicatedly superimposed. It is concluded that ${\chi}$-alumina, ${\gamma}$-alumina and ${\sigma}$-alumina are clearly identified as the major transitional phases formed from gibbsite by electron beam irradiation for 120 min.

• Conservation Science in Museum
• /
• v.20
• /
• pp.77-92
• /
• 2018

A stone seated bodhisattva (Sinsu5971) was discovered in Pyeongchang-gun, Gangwon-do in 1974 and was transferred to the Chuncheon National Museum upon its opening in 2002. The statue had damage to wide areas and was thus difficult to restore. This study utilized 3D scanning and 3D printing technologies to identify the overall form of the statue and the degree of damage, which allowed the restoration of lost portions that otherwise could not have been accurately restored to their original shape. Prior to the conservation treatment, the pigments used to decorate the surface were investigated using an optical microscope, and their main components were analyzed with a p-XRF (Potable X-ray Fluorescence Analyzer). The deteriorated lacquered surface was stabilized using animal glue and consolidated with stone strengthener (OH-100). The investigation found that the surface of the statue was made of zeolite that was lacquered and then gilded. As for pigments, white lead was used for the white color and red lead and cinnabar were used for red. The lost portions were redesigned by mirroring the remaining parts with 3D technologies. However, it was difficult to affix the 3D printing outputs to the statue without visible gaps since the damaged parts suffered flection. The portions of the outputs to be connected to the statue were thus modified and supplemented. It was also difficult to collect data on the properties of 3D printing materials due to the lack of previous in-depth study. These obstacles are subjects for further study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.95-103
• /
• 2024

Purpose. With the advancement of digital technology, 3D printing is being utilized in the fabrication of denture base. Nevertheless, increasing microbial adhesion to the surface of denture base has been reported as the disadvantage of 3D-printed denture base. The purpose of this study is to investigate the antifungal properties and flexural strength of 3D-printed denture base resin according to the different contents of titanium dioxide nanoparticles. Materials and methods. Titanium dioxide nanoparticles were mixed with the 3D printing resin at the ratios of 0.5, 1, 1.5, and 2 wt%. Twenty specimens per each group were printed in the form of cylindrical shape (diameter: 20 mm, height: 3 mm) to evaluate antifungal properties. Ten specimens from each group underwent polishing using autogrinder, while the remaining ten specimens did not. Candida albicans in hyphae form was inoculated onto each specimen, optical density and colony-forming unit were analyzed. The surface of the specimen was observed using scanning electron microscopy. To evaluate the flexural strength, twenty specimens per each group were 3D printed in the form of rectangular prism shape (length: 64 mm, height: 10 mm, width: 3 mm) and three-point bending tests were conducted using universal testing machine according to ISO 20795-1. Results. Colony-forming unit of C.albicans and optical density of culture medium showed no difference between non-polished groups, but decreased in the polished groups at concentration of 1, 1.5, 2 wt% titanium dioxide nanoparticles. Flexural strength increased with titanium dioxide nanoparticle at concentration of 0.5, 1, 1.5 wt%, but decreased at 2 wt% compared to 1.5 wt%. Conclusion. When 1.5 wt% of titanium dioxide nanoparticles were added to the 3D-printed denture base resin with polishing, antifungal properties were increased.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.455-460
• /
• 2014

This study compared the surface roughness and surface characteristics between a type IV stone and scannable stone. Materials used were a type IV stone, two different kind of scannable stone. Ten specimens per experimental group were prepared according to manufacturer's direction. Surface roughness of specimen was measured using profilometer. The measurement was based on the standard of Japanese Industrial Standards 1994. The mean and standard deviations of each reference point were analyzed using one-way ANOVA and Scheff$\acute{e}$ post hoc test. The program used to handle statistical analysis was SPSS 20.0 and the significance level was set at 0.05. The difference of surface roughness was statistically significant in order of Scannable Stone $10.07{\pm}0.02{\mu}m$, Scannable Stone $20.08{\pm}0.03{\mu}m$, Type IV $0.10{\pm}0.04{\mu}m$. These results will have to be confirmed in further clinical application researches.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.1-17
• /
• 2023

Purpose. The purpose of this study was to examine the correlation between the finish line designs and the marginal adaptation of nonprecious metal alloy coping produced by different digital manufacturing methods. Materials and methods. Nonprecious metal alloy copings were made respectively from each master model with three different methods; SLS, milling and casting by computer aided design and computer aided manufacturing (CAD-CAM). Twelve copings were made by each method resulting in 72 copings in total. The measurement was conducted at 40 determined reference points along the circumferential margin with the confocal laser scanning microscope at magnification ×150. Results. Mean values of marginal gap of laser sintered copings were 11.8 ± 7.4 ㎛ for deep chamfer margin and 6.3 ± 3.5 ㎛ for rounded shoulder margin and the difference between them was statistically significant (P < .0001). Mean values of marginal gap of casted copings were 18.8 ± 20.2 ㎛ for deep chamfer margin and 33 ± 20.5 ㎛ for rounded shoulder margin and the difference between them was significant (P = .0004). Conclusion. Within the limitation of this study, the following conclusions were drawn. 1. The variation of finish line design influences the marginal adaptation of laser sintered metal coping and casted metal coping. 2. Laser sintered copings with rounded shoulder margin had better marginal fit than deep chamfer margin. 3. Casted copings with deep chamfer margin had better marginal fit than rounded shoulder margin. 4. According to the manufacturing method, SLS system showed the best marginal fit among three different methods. Casting and milling method followed that in order.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.144-153
• /
• 2022

This study conducted scientific analysis and preservation treatment for the local 7 relics (depurator bottle, eagle patten button, rank insignia, mess tin, M1 Grand-gun cleaning tool kit, Carbine bullet, cartridge) of the fallen of Korean War excavated through the MND Agency for KIA Recovery & Identification that are possessed in the exhibition hall of the Ground Operations Command. FT-IR analysis results show that remainder of depurator bottle is assumed to play a role of water and food purifier during the war for its spectrum similar to Trisodium phosphate, and inscription carved on the cartridge that is hard to observe with naked eyes was also confirmed through 3D digital shooting method. This study also established directivity of preservation treatment of relics for stable treatment by carrying out a survey of conditions based on the microscope and visual observation. The result is expected to be used as basic data for establishment of future directivity of preservation treatment for a variety of war relics.