• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.835-836
• /
• 2009

본 연구는 스케치기반의 인터페이슬 통해 큐빅스플라인 곡선을 자동으로 생성하는 방법을 제시한다. 또한 탐색항해에서 많이 발생하는 이동중 관심영역으로의 뷰포인트를 자동으로 변환하기 위한 방법을 제시한다. 스케치기반 인터페이스는 일반인에게 친숙한 종이환경과 유사한 인터페이스를 통해 가상환경의 탐색항해를 위한 투어패스를 설정하고 관심영역을 중심으로 뷰포인트가 자동적으로 변환하는 기법을 제시함으로써 가상환경에 전문적인 지식이 없거나 전문개발자에게도 시간과 노력을 절약할 수 있는 방법을 제시한다.

• Electronics and Telecommunications Trends
• /
• v.31 no.4
• /
• pp.36-43
• /
• 2016

실 환경에 존재하는 모든 것을 3차원 모델로 쉽게 복원할 수 있을 것이라는 생각과 원격지에 있는 환경과 사람을 같은 공간에 있는 듯 상호작용할 수 있게 된 것은 그리 오래되지 않았다. 이는 일정 해상도를 보장해주는 RGB-D 센서의 개발과 이러한 센서들을 사용한 3차원 복원 관련 연구들이 활발히 수행되면서 가능하게 되었다. 본고에서는 널리 쓰이고 있는 RGB-D 카메라를 사용하여 실시간으로 때로는 온라인상에서 3차원으로 복원하고 가시화하는 기술에 대하여 살펴보고자 한다. 하나 또는 여러 개의 RGB_D 카메라를 사용하거나 모바일 장치에 장착된 RGB-D 센서를 사용하여 넓은 공간, 움직이는 사람, 온라인 상태의 환경 등을 실시간으로 복원하기 위한 기술들을 세부적으로 설명한다. 또한, 최근에 발표된 기술들이 다루고 있는 이슈들을 설명하고 향후 3차원 복원기술의 연구개발 방향에 대해서 논의한다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.189-198
• /
• 1998

3D medical image reconstruction techniques are useful to figure out complex 3D structures from the set of 2D sections. In the paper, 3D medical image reconstruction system is constructed under PC environment and programmed based on modular programming by using Visual C++ 4.2. The whole procedures are composed of data preparation, gradient estimation, classification, shading, transformation and ray-casting & compositing. Three speed optimization techniques are used for accelerating 3D medical image reconstruction technique. One is to reduce the rays when cast rays to reconstruct 3D medical image, another is to reduce the voxels to be calculated and the other is to apply early ray termination. To implement 3D medical image reconstruction system based on PC, speed optimization techniques are experimented and applied.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.3
• /
• pp.11-19
• /
• 2010

This paper describes how to define and implement the schema for 3D virtual objects with physical units so that the objects can be compared in virtual environments based on physical properties, such as length, according to the specified units. We define physical units for virtual objects using the International System of Units and based on the X3D (Extensible 3D) specification. The schema must be defined with validation so that it does not violate the original X3D data structure. In this paper, we have extended the original X3D schema with a physical unit specification, and demonstrate the difference between units-specified and non-units-specified 3D scenes using an X3D browser that we developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1884-1888
• /
• 2011

This paper designed 3D animation in consideration of young children's characteristics to stimulate their interest and to be more understandable to them. It was also confirmed that, using the 3D animation contents, young children came to recognize the problem of environment pollution and developed desirable attitude and behavior for protecting the environment. Therefore, this paper suggested the proper environment education activity materials with our environment culture centered to enable teachers to do efficient and practical environment conservation education activities by forming close relationship between teachers and children's family.

• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.896-908
• /
• 2003

Interaction technique in .3D virtual environment is a decisive factor that affects the immersion and presence felt by users in virtual space. Especially, in fields that require exquisite manipulation of objects such as electronic manuals in desktop environment, interaction technique that supports effective and natural manipulation of object is in demand. In this paper, 3D scene graph can be internally divided and reconstructed to a list defending on the users selection and through moving focus among the selection candidate objects list, the user can select 3D object more accurately Also, by providing various feedbacks for each manipulation stage, more effective manipulation is possible. The proposed technique can be used as 3D user interface in areas that require exquisite object manipulation.

• Journal of Environmental Science International
• /
• v.18 no.12
• /
• pp.1325-1330
• /
• 2009

The fumigant 1,3-dichloropropene (1,3-D) was recently proposed as a direct replacement for methyl bromide ($CH_3Br$) in soil fumigation. This study was conducted to better understand behavior phase partitioning, diffusion and volatilization of 1,3-D as affected by isomer. The Henry's law constant(KH) of cis-1,3-D and trans-1,3-D was 0.058 and 0.037 at $20^{\circ}C$, respectively. $K_H$ of cis form of 1,3-D was higher than that of trans form of 1,3-D. To compare with volatilization of 1,3-D isomer, soil column [70 cm (length)${\times}$12 cm (i.d.)] included a shank injection at 30 cm with 300 kg $ha^{-1}$. Maximum cis-1,3-D and trans-1,3-D concentration reached 57 mg $L^{-1}$ and 39 mg $L^{-1}$ at 30 cm depth at 1h after application. Cumulatively, after 10 days, 51.8% and 43.57% of applied cis-1,3-D and trans-1,3-D was emitted via volatilization, respectively. The total losses of cis-1,3-D were significantly greater than that of trans-1,3-D. Finally, cis-1,3-D and trans-1,3-D, such as isomer are dominant of 1,3-D fates in soil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.386-392
• /
• 2020

The self-weight of the 3D printing concrete increases with increasing printing height. Therefore, the lower layer must be hardened within a suitable time to secure continuous printing performance. In particular, the hardening speed of concrete is slow in the winter season when the temperature was low. Hence, the early strength of 3D printing concrete requires improvement. In domestic and international literature, cases of increasing the early strength of concrete using inorganic chemical additives, such as amine-based, nitrate-based, sodium-based, and calcium-based, have been reported. In this study, early strength improvement-type additive samples (amine-based, nitrate-based, sodium-based) were prepared, and their performance was evaluated. When using a nitrate-based additive, the early strength was increased significantly in a 10 ℃ environment. In addition, it was possible to secure a higher early strength than the existing 3D printing concrete mixed at 20 ℃.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.112-113
• /
• 2019

In this study, development of 3D software for automated formwork design was conducted to achieve optimization and reduction of labor for temporary work. Through the literature review, the current technical level was identified and the required functions of 3D software for automated formwork design were derived. The 3D software should be developed with the aim of automating 3D design, improving construction quality and utilizing the Internet of Things. As a preliminary step to develop 3D software, the prototype demo version was developed to implement 3D design automation function, which confirm the possibility of 3D software development.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.856-857
• /
• 2014

국내에서 이용되는 예측모델은 국립환경과학원식, 도로공사의 HW-NOISE, KHTN, 소음지도에 이용되는 외국의 RLS90, NMPB 등이 있다. 이러한 예측모델은 예측 방법 및 표현에 따라 예측식 2D(국립환경과학원식, HW-NOISE)와 3D로 예측(KHTN, RLS90, NMPB 등)으로 구분할 수 있다. 본 연구는 도로 주변 공동주택에서의 소음실측 및 예측식별 예측값을 통하여 예측식의 오차 및 오차의 원인을 분석하고 예측식의 적용방법에 대하여 고찰하였다.