• Journal of Biomedical Engineering Research
• /
• v.22 no.4
• /
• pp.339-347
• /
• 2001

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.632-636
• /
• 2006

It is needed to use the beam scanning to control the cell coverage of the base station considering operation conditions, season, time period, radiation character and mobility of customers and vehicles for varied wireless communication service and quality improvement. This paper proposes a mobile antenna system which can obtain the characteristics of the beam scanning by controlling the directivity depending on the operation condition. Radiation block is made of 2 sub-array of $1\times3$ patched antennas for ITS of 5.8GHZ bandwidth with the gain of 13dBi, and of 2 sub-array of single patched antenna for WiBro of 2.3GHZ bandwidth with the gain of 12dBi. RF module is made of a switch, an amplifier, a PAD, a 3-Bit phase shifter, and a power divider. The system is able to control the beam tilting with electronic methode by using 3-bit phase shifter$(45^{\circ},\;90^{\circ},\;180^{\circ})$.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.719-722
• /
• 2000

단일 카메라로 회전하는 물체의 영상을 획득한 후, 그 영상을 분석하여 3차원으로 복구하는 새로운 알고리즘을 제안한다. 제안하는 알고리즘은 물체의 회전과 단 하나의 카메라를 이용하는 방법이기에 기존의 스테레오 영상을 이용하는 방법에 비해 차이를 둘 수 있다. 회전하는 물체에는 회전축과 동일한 방향의 스캔라인을 형성시키고, 이 스캔라인을 적절한 측면에서 하나의 카메라를 이용해 영상으로 획득하여 스캔라인의 굴곡과 이 스캔라인에 인접한 화소의 컬러 정보를 이용하여 3차원의 물체를 재건한다. 이 방법은 3차원의 정보를 얻음에 있어 물체의 회전에 의존하기에 한 방향에서 얻어진 두 스테레오 영상의 정합과 각 방향에서 얻어진 영상을 정합 시킬 때 발생될 수 있는 스테레오 비전의 오류를 피할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.61-66
• /
• 2008

Recently, portable devices which require small area and low power consumption employ applications using 3D graphics such as 3D games and 3D graphical user interfaces. We propose an efficient clipping engine algorithm which is suitable in 3D graphics pipeline. The clipping operation is divided into two steps: one is the selection process in the transformation engine and the other is the pixel clipping process in the scan conversion unit. The clipping operation is possible with addition of simple comparator. The clipping for the Y-axis is achieved in the edge walk stage and that for the X and Z-axis is performed in the span processing. The proposed clipping algorithm reduces the operation cycles and the area of of 3D graphics pipelines. We designed a 3D graphics pipeline with the proposed clipping algorithm using Verilog-HDL and verifies the operation using an FPGA.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.16-18
• /
• 2001

3차원 영상을 처리하는데 있어 래스터라이제이션은 프레임 버퍼에 저장될 픽셀을 구하는 과정이다. 여러 개의 픽셀로 구성되는 폴리곤을 렌더링하기 위해서 스캔라인 방식 또는 반 평면 함수를 이용한 타일 트래버설 방식 등이 사용되고 있다. 본 논문에서 기반으로 하고 있는 타일 트래버설 방식은 스캔라인 방식에 비해 메모리 효율 및 텍스쳐 캐쉬의 지역성에서 이점을 가지고 있으나 복잡한 탐색 과정 때문에 파이프라인 구조로 구현하기는 어렵다. 본 논문에서 제안하는 구조는 분기 예측 기법을 적용하여 트래버설 과정에서의 분기로 인해 발생되는 파이프라인 지연을 기존의 트래버설 구조에 비해 약 30% 정도 줄임으로써 고성능 3차원 그래픽 가속기에 적합한 스캔 컨버젼 유닛을 제안하였다

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.196-202
• /
• 2020

Recently three-dimensional (3D) printed complete dentures are becoming more widely recognized as one of the treatment options for the edentulous patients. Korean National Healthcare, however, has not yet approved the application of the 3D printed dentures, and in the cases where the dentures should be refabricated, the conventional fabrication process needs to be entirely repeated. However, during the conventional process, the digital scan data of some key steps could be easily obtained. In this clinical case, using these data, a new pair of 3D printed dentures that improved the limitations of the first conventional dentures were successfully fabricated.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.27-35
• /
• 2021

Purpose: The purpose of this study is to compare the accuracy of digital scans of implants according to different shapes of scanbodies, and to compare the accuracy of library merging according to different oral exposure height. Materials and methods: A master model with a single tooth edentulous site was prepared. For the first experiment, three types of intraoral scanbodies were prepared, divided into three groups, and the following experiments were conducted for each group: An internal hex implant was placed. The master model with the scanbody connected was scanned with a model scanner, and a master reference file (control group) was created. 10 files (experimental group) were created by performing 10 consecutive scans with an intraoral scanner. After superimposing the control and experimental groups, the following values were calculated: 1) Distance deviation of a designated point on the scanbody 2) Angle deviation of the major axis of the scanbody. For the second experiment, the scanbody scan data were prepared in 6 different heights. Library files were merged with each of the scan data. The distance and angular deviation were calculated using the 7 mm scan data as control group. Results: In the first experiment, there were no significant differences between A and B (P=.278), B and C (P=.568), and C and A (P=.711) in the distance deviations. There were no significant differences between A and B (P=.568), B and C (P=.546), and C and A (P=.112) in the angular deviations. Also, the scanbody showed significantly higher library merging accuracy in the groups with high oral exposure height (P<.5). Conclusion: There were no significant differences in scan accuracy according to the different shapes of scanbodies, and the accuracy of library merging increased according to exposure height of the scanbody in the oral cavity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.25-31
• /
• 2018

Selective Laser Melting is one of the representative 3D printing techniques for handling metal materials. The main factors influencing the characteristics of structures fabricated by the SLM method include the build-up angle of structures, laser power, laser scan speed, and scan spacing. In this study, the tensile properties of AlSi10Mg alloys were investigated by considering the build-up angle of tensile test specimens, laser scanning speed and scan spacing as variables. The yield stress, tensile strength, and elongation were considered as tensile properties. From the test results, it was confirmed that the yield stress values were lowered in the order of 0, 45, and 90 based on the manufacturing direction of the tensile specimen. The maximum yield stress value was obtained at 1870 mm / min based on the laser scan speed. The yield stress size decreased with decreasing scan speed. Based on the laser scan spacing, as the value increases, the yield stress increases, but the variation is smaller than the other test criteria. The tendency of the tensile strength and elongation variation depending on the test conditions was difficult to understand.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.318-327
• /
• 2002

This paper Introduces a new scanning method for network-adaptive scalable streaming video coding methodologies such as the MPEG-4 Fine Granular Scalable (FGS) Coding. Proposed scanning method can guarantee the subjectively improved picture quality of the region of the interest in the decoded video by managing the image information of that interested region to be encoded and transmitted most-preferentially, and also to be decoded most-preferentially. Proposed scanning method can lead the FGS coding method to achieve improved picture quality, in about 1dB ~ 3dB better, especially on the region of interest.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.536-539
• /
• 2002

The reverse engineering (RE) technology can quickly generate 3D point cloud data of an object by capturing the surface of a model using a 3D scanner. In the rapid prototyping (RP) technology, prototypes are rapidly produced from 3D CAD models in a layer-by-layer additive basis. In this paper, a physical human head shape is duplicated using a new RP process, the Transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), after the point cloud data of a human head shape measured from 3D SNX scanner are converted to STL file. From the duplicated human head shape, it has been shown that the VLM-ST process in connection with the 3D scanner is a fast and efficient process in that shapes with free surface, such as the human head shape, can be duplicated with ease. Considering the measurement time and the shape duplication time, the use of 3D SNX scanner and the VLM-ST process is expected to reduce the lead-time fur the development of new products in comparison with the other existing RE-RP connected manufacturing systems.