• 한국농공학회지
• /
• 제28권4호
• /
• pp.49-56
• /
• 1986

This study was carried out to investigate mechanical characteristics of the uniformly loaded skew-plate at 4 kinds of boundary condition : i) all edges are clamped (BC-1) , ii) all edges are simply supported (BC- 2), iii) two opposite edges are clamped and the other two edges are free (BC-3), and iv )two opposite edges are simply supported and the other two edges are free (BC-4). Various skew angles, 0$^{\circ}$, 10$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, 40: 45: and 60, of the plate were tested for the above boundary conditions. Resutts obtained from the study are summarized as follows ; 1.The lateral displacement at the center of a skew- plate was decreased as the skewangle increased at all of the boundary conditions. The decrements of the conditions of BC-3 and BC-4 were considerable. And, difference of the displacement between the boundary conditions was decreased as the skew-angle was increased. 2. X-moments (to the Y-axis) at the center of a skew- plate and the minimum principal moments were shown as a similar pattern of change with respect to the skew-angle variation between BC-i and BC-2 and between BC-3 and BC-4, and the pattern of change at the conditions of BC-3 and BC-4 were shown higher rates than those for the conditions of BC-i and BC-2 3.Y-moments (to the X- axis) at the center of a skew-plate and the maximum principal moment were decreased as the skew-angle increased in a similar pattern at all of the boundary conditions. 4.X-moments at the obtuse angle side of a skew-plate were shown as a parabolic pattern of change (frist increased after then decreased) as the skew-angle increased, and a skew-angle resulting the maximum absolute moment was depended on the boundary conditions. 5.Y-moments at the obtuse angle side of a skew-plate were affected by the skewangle much more at the boundary condtions of BC-2 and BC-4 than at the conditions of BC-i and BC-3. 6.Maximum principal moments at the obtuse angle side of a skew-plate at the skew angle of 40$^{\circ}$- 45$^{\circ}$ were resulted almost the same value at all of the boundary conditions .

• 생명과학회지
• /
• 제16권3호
• /
• pp.527-533
• /
• 2006

벼의 약 및 현미 배양효율과 관련된 DNA marker를 이용하여 인디카형 벼 품종인 'IR 36'의 조직배양 효율을 개선하기 위하여 실험한 결과를 요약하면 다음과 같다. MGRI집단의 약배양에서 식물체분화율이 높은 계통으로 선발된 'MGRI 079'와 'MGRI 036'의 약배양 효율은 각각 19.8%, 19.9%로 가장 높게 나타났다. 'MGRI 079'에 'IR 36'이 여교배되어 양성된 $BC_2F_4$ 100 계통에 대한 marker 검정을 실시하여 선발된 34 계통중 약배양에서 캘러스 형성률이 'IR 36'보다 높은 계통은 30계통이었고, 현미배양에서 'IR 36'보다 식물체 분화율이 높은 계통은 $BC_2F_4-28$ 외 14 계통이었다. $BC_2F_4$ 34계통 중에서 식물체분화능력이 높은 계통으로 선발된 $BC_2F_4-28$은 간장이 'IR 36'보다 큰 편이었으나 출수기와 미립특성은 'IR 36'과 비슷하였다. 'MGRI 036'에 'IR 36'을 반복친으로 여교배하여 양성된 $BC_4F_3$ 50계통의 현미배양을 실시한 결과 'IR 36'보다 식물체 재분화율이 높은 계통은 $BC_4F_3-3$ 외 10 계통이었고, 그중 $BC_4F_3-46$의 식물체 재분화율이 11%로 가장 높게 나타났다.

• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.361-370
• /
• 2017

Objectives: This study evaluated the diesel engine exhaust (DEE) exposure levels of door-to-door deliverers in Daegu from July to September. Methods: We measured exposure levels of DEE surrogates for the same door-to-door deliverers who joined the particulate matter 2.5 exposure study previously published in this journal. Black carbon(BC) concentrations were measured using real-time BC monitoring devices with 1 minute interval. $NO_2$ concentrations were monitored using passive badges. DEE exposure data were analyzed using the same characteristics and GPS information as the first study. Results: A total of 40 measurements of BC concentrations and $NO_2$ concentrations were collected during delivery of parcels. The average exposure levels to BC, and $NO_2$ were $2.23{\mu}g/m^3$ ($0.001-350.85{\mu}g/m^3$) and 21.26 ppb(3.3-61.37 ppb), respectively. Exposure levels to BC according to the day of a week and coverage areas were not significantly different(p>0.05). Delivery trucks manufactured before 2006 caused significantly higher exposure to BC than the trucks manufactured after 2006(p<0.05). Exposure levels of BC integrated for each time in residential area and roadsides were $1.96{\mu}g/m^3$ and $3.46{\mu}g/m^3$, respectively, and the difference was statistically significant(p<0.001). The Pearson correlation coefficients between the ambient $PM_{2.5}$ and BC was significant, r=0.26(p<0.01); however, the correlations between $PM_{2.5}$ and ambient $PM_{2.5}$, and between BC of DEE and $PM_{2.5}$ of DEE did not show a significant correlation Conclusions: BC and $NO_2$ exposure levels were significantly lower when door-to-door deliverers drove newer trucks. BC exposure levels of deliverers were higher in roadsides than in residential area. DEE from nearby vehicles through open windows might be the main source of BC exposure.

• 인터넷정보학회논문지
• /
• 제6권3호
• /
• pp.1-16
• /
• 2005

본 논문은 모바일 전자 상거래 환경에서 투자 신탁을 위한 MDIT(Mobile Digital Investment Trust) 에이전트 설계를 제안하고 또한 이 MDIT에서 모바일 전자 상거래 환경이 가지고 있는 기억 장치 용량, CPU 처리 속도 문제, 그리고 보안 강화 문제점을 해결하기 위해, 비밀키 암호 알고리즘인 3BC(Bit, Byte end Block Cypher)와 공개키 알고리즘인 F2mECC 설계를 제안한다. 특히, MDIT는 모바일 전자상거래에 투자 신탁의 개념을 도입한 은행 업무 보안 프로토콜로서 공개키 알고리즘인 ECC를 이용해 공유 비밀키를 생성한 후, 이 값을 공유 비밀키를 대칭키로 사용하는 블록 암호화 기법인 3BC에 사용하여, 보안 기능을 강화시키고, 처리속도를 감소시킨 MDIT 보안 에이전트를 구축하였다.

• 한국육종학회지
• /
• 제43권5호
• /
• pp.360-367
• /
• 2011

Beta-carotene producing transformants were produced in the background of 'Nagdongbyeo', a Japonica rice cultivar. Introgression of the carotenoid locus in the transformant, PAC4-2 into the elite cultivar 'Ilpumbyeo' was started. To initiate a backcrossing program, we surveyed 220 SSR markers and found that 38% of them were polymorphic between 'Ilpumbyeo' as a recurrent parent and the PAC4-2 as a recipient parent. The selection strategy comprising foreground and background selection was employed. First, foreground selection was practiced in $BC_1$, $BC_2$, and $BC_3$ generations using the transgene specific PCR-based marker in addition to visual scoring of the seed color. Marker-based background selection combined with phenotypic selection was employed from $BC_3F_2$ to $BC_3F_4$ generations. Blast search indicated that the transgene PAC4-2 was located between SSR markers, RM6 and RM482. 240 $BC_3F_3$ and 63 $BC_3F_4$ lines were evaluated for four agronomic traits including days to heading. Most of the lines were similar to Ilpumbyeo in agronomic traits evaluated. The percentage of PAC4-2 genome ranged from 4% to 21% with a mean of 12.5%, which was higher than the expected for an unselected $BC_3$ backcross population. This could be explained by the fact that two genes for beta-carotene and the stripe virus resistance were targeted in this study. We selected 10 representative $BC_3F_5$ lines from 63 $BC_3F_4$ lines based on agronomic traits and carotenoids content. The selection strategy would be appropriate for the introgression of beta-carotene gene in a breeding program.

• 한국작물학회지
• /
• 제37권4호
• /
• pp.305-312
• /
• 1992

6배체 트리티케일 신기호밀과 4배체 호밀 품종 두루호밀을 교잡하여 이들의 임실율, 잡종 후대들의 염색체수의 변이, 작물학적 특성등을 검토하므로써 트리티케일 품종육성의 기초자료로 제공코져 실시한 본 시험의 결과를 요약하면 다음과 같다. 1. 신기호밀(P$_1$)과 두루호밀(P$_2$)의 교잡에서 교잡율은 30.5%, 역교배에서는 3.26%였다. F$_1$/P$_1$(=BC$_1$)에서는 8.75%, F$_1$/P$_2$(=BC$_2$)에서 7.20%, 그리고 F$_1$/F$_1$(=F$_2$)은 1.53%의 교잡율을 보였다. 2. 교잡된 교배종자의 발아율은 F$_1$ 종자 37%, F$_2$ 43.0%, BC$_1$, 39.0%, BC$_2$, 50.0%로 나타났으며, 천립중은 각각 20.7g, 24.5g, 25.4g, 23.6g 이었다. 3. F$_1$(=P$_1$/P$_2$) 식물체의 화분임성은 30.2%였고, 69.8%는 비정상 화분이었다. 4. F$_1$식물체의 화분 모세포 감수분열에서 1가 염색체 13.5%개, 2가 염색체 8.89%, 3가 염색체 1.24개로 2개 염색체는 50.8%였다. 5. 체세포 염색체수는 F$_1$ 35개 였고, F$_2$는 32-33개, 35-36개를 갖는 개체가, BC$_1$은 35-39개를 갖는 개체가 많았다. 그리고 BC$_2$는 28-36개의 분포를 보였다. 이는 F$_1$ 식물체에서 14-18개의 염색체를 갖는 배우자와의 결합이 많음을 보여준다. 6. 임성 개체의 비율은 F$_1$, 100%, F$_2$, 4.5%, BC$_1$, 42.9%, BC$_1$, 50.0%였으며 임성개체의 평균수당 임실립수는 F$_1$, 1.17개, F$_2$, 13.3개, BC$_1$, 2.36개, BC$_2$, 3.75개 였다. 7. 출수기는 F$_1$이 양친의 중간을 보였고, BC$_1$과 BC$_2$는 양친의 영향을 보였으며, F$_2$는 만숙친 보다도 늦었다. 간장은 F$_1$이 장간친과 비슷 하였으나 F$_2$, BC$_1$, BC$_2$는 단간친보다 작았고 특히 BC$_1$은 단간친보다 35cm나 짧았다. 수장과 수당 소수수는 F$_1$이 양친보다 길거나 많았다. 소수당 영화수는 양친의 영향을 크게 받았다.

• 대기
• /
• 제29권3호
• /
• pp.241-255
• /
• 2019

Bias correction (BC) and quality control (QC) are essential steps for the proper use of satellite observations in data assimilation (DA) system. BC should be calculated over quality controlled observation. And also QC should be performed for bias corrected observation. In the Korea Institute of Atmospheric Prediction Systems (KIAPS) Package for Observation Processing (KPOP), we adopted an adaptive BC method that calculates the BC coefficients with background at the analysis time rather than using static BC coefficients. In this study, we have developed an iterative QC-BC method for Advanced Microwave Sounding Unit-A (AMSU-A) to reduce the negative feedback from the interaction between BC and QC. The new iterative QC-BC is evaluated in the KIAPS 3-dimensional variational (3DVAR) DA cycle for January 2016. The iterative QC-BC method for AMSU-A shows globally significant benefits for error reduction of the temperature. The positive impacts for the temperature were predominant at latitudes of $30^{\circ}{\sim}90^{\circ}$ of both hemispheres. Moreover, the background warm bias across the troposphere is decreased. Even though AMSU-A is mainly designed for atmospheric temperature sounding, the improvement of AMSU-A pre-processing module has a positive impact on the wind component over latitudes of $30^{\circ}S$ near upper-troposphere, respectively. Consequently, the 3-day-forecast-accuracy is improved about 1% for temperature and zonal wind in the troposphere.

• 미생물학회지
• /
• 제45권3호
• /
• pp.275-280
• /
• 2009

한국 전통발효식초로부터 분리된 Acetobacter sp. V6에 의한 bacterial cellulose (BC) 생산을 위한 최적 배지조성을 정치배양을 이용하여 조사한 후, 생성된 BC의 구조적 특성을 검토하였다. 탄소원으로 glucose 3%, 질소원으로 soytone 3%가 선정되었다. 또한 인산염은 $K_2HPO_4$ 0.8%였으며, 추가로 첨가한 $NaH_2PO_4$와 $KH_2PO_4$는 BC 생산 증가를 나타내지 못하였다. 보조탄소원으로 ethanol 0.4%에서 가장 높은 BC 생산성을 나타내었다. 최적 배지조성하에서 배양 8일만에 최대 44.7 g/$m^2$의 BC가 생산되었으며, 배양 8일경, BC pellicle의 두께는 약 1 cm였다. BC의 구조는 Fourier-transform infrared spectroscopy 및 X-ray diffractometer를 이용하여 조사하였다. 최적배지에서 생성된 BC는 전형적인 cellulose type I임을 알 수 있었으며, 식물성 셀룰로오스와 성분의 차이가 없었다. 또한 독특한 미세망상구조로 이루어져 있었고, 높은 결정성을 나타내어 식물유래 셀룰로오스와 다른 독특한 물성을 나타내는 것으로 추정되었다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.79-84
• /
• 2015

A BC-B type bulk carrier is rarely built, so the structural characteristics is not reported and familiar so far. The biggest difference between BC-B and BC-A type vessel is applying alternate cargo loading, which density is over $1.0ton/m^3$. In this paper, 150K DWT class BC-B type bulk carrier is calculated and compared with BC-A type vessel, which has same condition such as main dimension and deadweight, about prescriptive rule and FEA based on CSR. And aspect ratio of target vessel is smaller than typical capsize bulk carrier, so 150K and 180K bulk carrier, which applied BC-A type, are also compared to find feature of wide beam vessel.

• 한국미생물·생명공학회지
• /
• 제25권2호
• /
• pp.144-150
• /
• 1997

After DNA damage, umuDC is the only SOS operon that must be induced to promote SOS mutagenesis in Escherichia coli. The recombinant plasmid pBC401 and pBC402 were constructed to fuse the lac structural genes with promoter region of umuDC operon to induce the expression of lacZ gene by DNA damage. We transformed the plasmid pBC401 and pBC402 into E. coli MC1061, lacZ deleted strain and determined the activity of $\beta$-galactosidase for various mutagen; UV, mitomycin C (MMC), N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), 4-nitroqunoline-1-oxide (NQO), ethyl methanesulfonate (EMS). The $\beta$-galactosidase activities of PBC401 and pBC402 for UV, MMC, and NQO were increased in proportion to expression time until 3 hours thereafter, the activities were constant or slightly decreased. The activities for MNNG and EMS were not so high as for UV, MMC, and NQO. When MNNG and EMS were treated, $\beta$-galactosidase activity of pBC402 was slightly lower than pBC401 but when UV, MMC, and NQO were treated in pBC402, $\beta$-galactosidase activity was slightly higher than in pBC401. Therefore, the pBC402 was better than the pBC401 in terms of sensitivity for frameshift mutagen. We suggest that the plasmid pBC401 and pBC402 are easy to detect mutagens which cause frameshift mutation rather than point mutation.