• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.147-149
• /
• 2020

코로나바이러스의 세계 확산, 발병 이후 사람들의 실내활동 증가와 건강, 면역에 대한 관심은 많이 증가했다. 이에 맞춰 더욱 정교하고 바른 정보에 의한 스마트헬스케어 역시 관심이 증대되고 있다. 여기서 이야기하는 스마트헬스케어의 범위는 영상 장치를 비롯해 다양한 센서를 활용해 신체활동을 모니터링하고 분석하며 기존의 방식보다 더 객관적인 정보를 제공해 주는 것을 말한다. 위 기술과 대중의 관심을 바탕으로 하여 본 연구에서는 다중 모드 센서를 신체에 부착하여 신체활동을 모니터링 하는 시스템 개발을 목적으로 한다. 하드웨어 설계 부분에서 설계가 완성된 Arduino nano 33 Sense를 이용하여 스마트 헬스 실험 시간을 대폭 줄였다. 또한 운동과 같은 시계열 데이터를 분석하기 좋은 LSTM 기법을 채택하였으며, 개발된 모델을 추후 활용할 방안에 대해 논하였다.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.328-335
• /
• 2014

Numerical prediction methods were applied to investigate the turbulent air currents and air-conditioning efficiency in an underground subway station, and the results compared to experimental data. The Shin-gumho Station($8^{th}$ floor underground and 43.6m in depth) in Seoul was selected for the analysis. The entire station was covered for simulation and the ventilation mode was ordinary. The ventilation diffusers were modeled as 95 square shapes of $0.6m{\times}0.6m$ in the lobby and as 222 square shapes in the platform. Cooling air of $47,316m^3/h$ was supplied and the returned air of $33,980m^3/h$ is exhausted in the lobby and the cooling air of $33,968m^3/h$ is supplied and the returned air of $76,190m^3/h$ was exhausted in the platform which is the same as the experimental data. The cases of the screen-door-closed and open were respectively investigated. A total of 7.5million grids were generated and the whole domain divided into 22 blocks for MPI efficiency of calculation. Large eddy simulation (LES) was applied to solve the momentum and energy equation.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.91-96
• /
• 2020

The 33-mode dielectric and piezoelectric properties of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 piezoelectric single crystals were measured under large electric field and compressive stress. The phase transition from the low temperature rhombohedral to the high temperature tetragonal structure was observed in the range of 110~140℃, and the Curie temperature changing to the cubic structure was about 165℃. The polarization change according to the compressive stress and electric field was measured. Relative dielectric constant was calculated from the slope of the polarization curve applied to the electric field, and the calculated relative dielectric constant increased as the applied stress increased, and the relative dielectric constant decreased as the applied electric field increased. The strain according to the compressive stress and electric field change was measured, the piezoelectric constant was calculated from the slope of the curve, and the phase transition according to the application of pressure was confirmed. In the case of practical application as an underwater or medical ultrasonic actuator, it is necessary to properly design the magnitude of the compressive stress applied to the device and the DC bias in order to maintain linear driving.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.4
• /
• pp.266-274
• /
• 2024

In this paper, we designed a low-area 32-bit PF (Poly-fuse) OTP IP, a non-volatile memory that stores data required for analog circuit trimming and calibration. Since one OTP cell is constructed using two PFs in one select transistor, a 1cell-2bit multibit PF OTP cell that can program 2bits of data is proposed. The bitcell size of the proposed 1cell-2bit PF OTP cell is 1/2 of 12.69㎛ × 3.48㎛ (=44.161㎛2), reducing the cell area by 33% compared to that of the existing PF OTP cell. In addition, in this paper, a new 1 row × 32 column cell array circuit and core circuit (WL driving circuit, BL driving circuit, BL switch circuit, and DL sense amplifier circuit) are proposed to meet the operation of the proposed multbit cell. The layout size of the 32bit OTP IP using the proposed multibit cell is 238.47㎛ × 156.52㎛ (=0.0373㎛2) is reduced by about 33% compared that of the existing 32bit PF OTP IP using a single bitcell, which is 386.87㎛ × 144.87㎛ (=0.056㎛2). The 32-bit PF OTP IP, designed with 10 years of data retention time in mind, is designed with a minimum programmed PF sensing resistance of 10.5㏀ in the detection read mode and of 5.3 ㏀ in the read mode, respectively, as a result of post-layout simulation of the test chip.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.63-66
• /
• 2009

기존의 H.264/AVC 비디오 표준은 고화질 비디오 부호화를 지원하지만 고해상도에 특화된 요소 기술이 도입되지 않아 만족할만한 성능을 보이지 못한다. 현존하는 동영상 압축 표준 중 가장 뛰어난 H.264/AVC 표준의 인트라 $16{\times}16$ 예측은 매크로블록에 인접한 최대 33개의 주변 화소를 이용하여 매크로블록에 속한 256개의 화소 값을 예측한다. 특히, 전체 예측 모드 중 수직과 수평 예측 모드에서는 16개의 수직 또는 수평 위치에 위치한 주변 화소로 전체 매크로블록 내의 화소 값을 예측하므로 매크로 블록의 끝으로 갈수록 예측의 정확도가 떨어져 부호화 비트가 증가한다. 고화질 영상에서는 인트라 $16{\times}16$ 모드로 부호화되는 블록이 많으므로 수행되므로 인트라 $16{\times}16$ 예측의 정확도를 높일 수 있는 기술이 필요하다. 본 논문에서는 기존의 H.264/AVC의 예측 방법보다 예측 정확도가 높은 새로운 라인 기반 $16{\times}16$ 인트라 예측 방법을 제안한다. 일반적으로 편평한 특성을 보이는 인트라 $16{\times}16$ 블록이라도 좀 더 가까운 화소를 참조 화소로 사용하면 예측의 정확도를 높여 부호화 비트를 줄일 수 있다. 이를 이용하여 제안하는 알고리즘에서는 인트라 $16{\times}16$ 블록에서 16개 화소 한 줄을 단위로 예측 및 부호화를 수행한다. 1080p HD급 테스트 영상을 이용하여 실험한 결과, 기존의 H.264/AVC FRExt High 프로파일에 비해 평균 약 6.92%의 부호화 비트를 감소시킬 수 있음을 보였다.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.33-42
• /
• 1999

In the present study, crack initiation criteria, static failure and tensile mode fatigue behavior for a rail steel are evaluated to assure the railway vehicle's safety. The transverse fissure, which is the most critical damage in the rail, is initiated by the maximum shear stress and its location is subsurface. In addition, the possibility of transition from the shear mode to the mixed mode increases with increasing the length of subsurface crack. Because of the brittleness by the welding, the fracture toughness of the welded part is lower than of the base metal. For low ${\Delta}K$, the stage II fatigue crack growth rates of the welded part is slower than of the base metal but, for high ${\Delta}K$, this different behavior for fatigue crack growth rate is nearly diminished. These trends are more remarkable for low stress ratio, R=0.1. It is believed that this behavior is caused by the change of the microstructure which that of the welded part is coarser than of base metal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.387-393
• /
• 2008

In this paper, we present an SDR (Software Defined Radio) handset modem platform which supports communication systems such as HSDPA (High Speed Downlink Packet Access), and WiBro (Wireless Broadband Portable Internet). The proposed SDR platform employs DSPs (Digital Signal Processors), FPGAs (Field Programmable Gate Arrays), and microprocessors in such a way that the various communication functions like HSDPA and WiBro can be programmed and downloaded to the hardware platform. The proposed SDR platform can be used for functional verification of the physical layers of the mobile handset system in the mobile communication network. We first demonstrate the receiving structure of the physical layer of the HSDPA and WiBro system. Then, the hardware implementation of the proposed SDR platform is shown with functions and optimized signal flows required at each mode. Finally, the link performance of each mode operating on the proposed SDR platform is presented through the internal loopback tests with the test vectors. The experimental performance has been compared with the computer simulation results.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.658-665
• /
• 2006

In these days, the demand of users to extend available period of mobile systems is increased according as the functions of mobile systems have been varied and the use of multimedia application has been increased. This paper proposes an integrated power management framework that considers executed workload types for effective energy management. The conventional methods use DVFS technique for CPU and DPM technique for WNIC separately or simply combine them based on the assumption that they are orthogonal one another. However, the proposed mechanism determines the kind of workload under analysis of the characteristics of workloads incoming through a WNIC. The proposed method can reduce energy consumption of system level effectively by controlling CPU and WNIC to proper power mode based on analyzed characteristics of workload. The experimental result shows the proposed method reduces energy consumption by 9% for BE (Best Effort) workload, CBR (Constant Bit Rate) workload, and Interactive workload on average and by 16% to maximum when compared with the conventional methods which simply combine DVFS technique for CPU and DPM technique for WNIC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.403-410
• /
• 2008

In this paper, we investigate the performance of MMR system in Non-transparent mode. The IEEE 802.16j MMR system has two node of operation, Single-frame (in band) and Multi-frame (out band) mode. In the analysis, we assume that channel interference between MR-BS and RS, or between RSs anywhere in the given area is ignored. The performance is presented in terms of the delay and the frame efficiency by varying number of RS and BS coverage to RS coverage ratio and the maximum coverage area of a BS by varying traffic density. Analytical results show that the Single-frame is more efficient than Multi-frame in frame efficiency and coverage extension.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1046-1054
• /
• 2008

Since the high quality digital TV systems are broadly deployed in the market, the digital video contents will be edited and distributed in MPEG-2 MP@HL fonnat. Due to its impressive coding efficiency, the H.264/AVC codec has rapidly replaced the MPEG-4 SP codec for mobile digital video terminal with low quality. For the bro ad distribution of digitial video contents produced in MPEG-2 format, the MPEG-2 to H.264/AVC transcoding is highly necessary nowadays. In this paper, we propose a fast intra MB prediction mode decision method to reduce the computational complexity in the transcoding, which is the main bottleneck in the transcoders. The proposed method is based on the several relationships such as DCT coefficients and edge orientation, correlation between prediction directions in the $Intra16{\times}16$ and $Intra4{\times}4$ modes, correlation between edge-orientations of luminance an d chrominance components. The simulation results show that the proposed method can reduce the computational complexity upto 70% and 40%, compared with the cascaded transcoder and the well-known fast intraframe transc oder, respectively.