• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1377-1382
• /
• 2011

최근, 화석연료의 고갈과 환경오염의 문제로 인해 차세대 신재생 에너지에 대한 관심이 증대되고 있다. 그 중 수소연료는 친환경, 저장의 용이, 손쉬운 제조 등과 같은 장점에 반해 가연범위가 넓고, 폭발의 위험성이 단점으로 대두되고 있다. 본 연구에서는 간편한 SP 시험법을 이용하여 고압수소가스 분위기 하에서 in-situ 수소취화거동을 평가할 수 있는 시험기법을 확립하고자 한다. 그 적용성을 평가하기 위해서 수소저장용기 재료로 사용되는 스테인리스강(SUS316L)을 사용하여 대기압, 고압 헬륨 및 수소가스 분위기에서 시험하였다. 실험결과, 고압 수소가스 분위기에서는 수소 침투로 인해, 대기압 및 헬륨가스 분위기하에서와 달리, 시험편 표면에 미세균열 발생과 하중-변위 선도상 소성불안정 변형 영역에서 연신율 감소를 가져왔고, 파면관찰 결과 수소취화 균열이 관찰되어 SP시험법의 유효성을 나타내었다.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.42-51
• /
• 2021

Investigations of process parameters are essential when fabricating high-quality parts using additive manufacturing. This study investigates the change in the mechanical characteristics of a SUS316L specimen fabricated using selective laser melting based on the energy density and bead overlap ratio. The SUS316L powder particles were spherical and 35 ㎛ in size. Single-bead and hexahedral shape deposition experiments were performed sequentially. A single bead experiment was performed to obtain the bead overlap ratios for different laser parameters utilizing laser power and scan speed as experimental parameters. A hexahedral shape deposition experiment was also performed to observe the difference in mechanical properties, such as the internal porosity, surface roughness, and hardness, based on the energy density and bead overlap ratio of the three-dimensional printed part. Laser power, scan speed, overlap ratio, and layer thickness were chosen as parameters for the hexahedral shape deposition experiment. Accordingly, the energy density applied for three-dimensional printing, and the experimental parameters were calculated, and the energy density and bead overlap ratio for fabricating parts with good properties have been suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.802-808
• /
• 2011

극저온 온도 구조 재료의 중요한 기계적 성질 중 하나는 파괴 인성이다. 파괴 인성 시험 방법의 규격화에 대한 연구는 극저온 구조 요소의 개발과 함께 매우 중요한 문제가 되고 있다. 특히 용접부의 경우 극저온 환경 하에서 사용할 때 불안정파괴를 유발할 수 있기 때문에 용접부의 각 미세조직에 따른 기계적 성질 평가가 중요하다. 본 연구에서는 STS-316L 모재와 용접재를 대상으로 액체질소(77K), 액체헬륨(4K), 293K 온도에서 제하컴플라이언스법과 예민화 열처리한 소형화된 시험편 대상으로 파괴인성평가 실험을 수행하였다.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.28-33
• /
• 2008

This paper presents the characteristics of mechanical properties within the heat affected zones(HAZs) of dissimilar metal weld joint between SA508 Gr.1a and F3l6 stainless steel(SS) with Alloy 82/182 filler metal. Tensile tests were performed using small-size specimens taken from the heat affected regions close to both fusion lines of weld, and the micro-structures were examined using optical microscope(OM) and transmission microscope(TEM). The results showed that significant gradients of the yield stress(YS), ultimate tensile stress(UTS), and elongations were observed within the HAZ of SA508 Gr.1a. This was attributed to the different microstructures within the HAZ developed during the welding process. In the HAZ of F316 SS, however, the welding effect dominated the YS and elongation rather than UTS. TEM micrographs demonstrated these characteristics of the HAZ of F316 SS was associated with a dislocation-induced strain hardening.

• 동력기계공학회지
• /
• 제19권6호
• /
• pp.12-18
• /
• 2015

Austenitic stainless steels generally experience the occurrence of chromium-depleted zones at the boundaries, known as sensitization, caused by the carbide precipitation that takes place due to a welding process or heat treatment. Normally, the depleted zones become the focus of the intense corrosion. In this study, the Cr-free organic/inorganic hybrid solution was developed, and the artificially degraded STS316S and STS347H with the solution-coating investigated the corrosion resistance by salt spray test. Both the OIBD-1 and OIBD-2 solutions improved the corrosion resistance of STS310S and STS347H. The corrosion resistance with the OIBD-1 solution was better than that of OIBD-2 solution. Additionally, Both solutions have been proven excellence in adhesion ability, boiling water resistance and flexibility. However, a problem of rubbing after the boiling was found out to be overcome.

• Corrosion Science and Technology
• /
• 제8권5호
• /
• pp.193-196
• /
• 2009

For the estimation of uncertainty in potentiodynamic polarization resistance measurement, the type A uncertainty was measured using type 316 stainless steel in an acidified NaCl solution. Sensitivity coefficients were determined for measurand such as scan rate of potential, temperature of solution, concentration of NaCl, concentration of HCl, surface roughness of specimen and flow rate of purging gas. Sensitivity coefficients were large for the measurand such as the scan rate of potential, temperature of solution and roughness of specimen. However, the sensitivity coefficients were not the major factors influencing the combined standard uncertainty of polarization resistance due to the low values of uncertainty in measurements of the measurands. A major influencing factor was the concentration of NaCl. The value of type A uncertainty was 1.1 times the value of type B uncertainty, and the combined standard uncertainty was 10.5 % of the average value of polarization resistance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권1호
• /
• pp.45-49
• /
• 2001

A magnet supporting post installed between the lower TF coil tooled by 4.5 K supercritical helium and the cryostat base is one of the most important components of the superconducting magnet supporting structure for KSTAR Tokamak. This structure should be flexible to absorb thermal shrink of the magnet and also should be rigid to support the magnet weight and the Plasma disruptions load. The Post was designed with stainless steel 316LN and CFRP that have low thermal conductivity and high structural strength at low temperature. In order to verify the possibility of fabrication and the structural safety. a whole scale prototype of the KSTAR magnet supporting post was manufactured and tested. Static and compressive cyclic load tests under the maximum Plasma vertical disruption load and the magnet dead weight were performed. The teat results showed that the magnet supporting post of KSTAR Tokamak was possible to manufacture and structurally rigid.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.838-847
• /
• 2004

The effect of a metal mold on densification behavior of stainless steel 316L powder was investigated under warm isostatic pressing with a metal mold. We use lead as a metal mold and obtain experimental data of metal mold properties. To simulate densification behavior of metal powder, elastoplastic constitutive equation proposed by Shima and Oyane was implemented into a finite element program (ABAQUS) under warm die pressing and warm isostatic pressing with a metal mold. Finite element results were compared with experimental data for densification and deformation of metal powder under warm isostatic pressing and warm die pressing.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1106-1116
• /
• 1994

Leak Before Break(LBB) design concept is applied to piping systems of newly-built Yonggwang 3, 4 nuclear generating stations as a design alternative to the provision of pipe whip restraints, in recognition of the questionable benefits of providing such restraints. The objective of this paper is to evaluate the material properties (tensile and fracture toughness) of SA312 TP316 stainless steel and their associated welds manufactured for shutdown cooling system of Yonggwang 3, 4 nuclear generating stations. Effect of various parameters such as specimen orientation, test temperature, welding on material properties were examined.

• 소성∙가공
• /
• 제21권2호
• /
• pp.107-112
• /
• 2012

Gas-assisted injection molding(GAIM) produces parts with hollow internal sections. The technique offers benefits to powder injection molding(PIM), with lower material usage and reduced time for de-binding processes. In this study, the effects of processing parameters on gas penetration length of gas-assisted powder injection molding(GAPIM) were investigated for SUS316L stainless steel powder feedstock. Experiments were planned based on the Taguchi method, involving processing variables such as melt temperature, shot size, gas pressure, and gas delay time. The most significant parameters affecting gas penetration length were gas delay time and shot size, while the effects of melt temperature and gas pressure was relatively insignificant.