• 한국안전학회지
• /
• 제13권3호
• /
• pp.24-31
• /
• 1998

Variable thickness plates are commonly encountered in the majority of mechanical/structural components of industrial applications. And, as a result of the unsymmetry of the structure or the load and the anisoptropy of the materials, the cracks in engineering structures are generally subjected to combined stresses. In spite of considerable practical interest, however, a few fracture mechanics study on combined mode crack in a variable thickness plate have carried out. In this respect, combined mode I/III stress intensity factors $K_I$ and $K_III$ at the crack tip for a variable thickness plate were obtained by 3-dimensional finite element analysis. Variable thickness plates containing a central slant crack were chosen. The parameters used in this study were dimensionless crack length $\lamda$, crack slant angle $\alpha$, thickness ratio $\beta$ and width ratio $\omega$. Stress intensity factors were calculated by crack opening displacement(COD) and crack tearing displacement(CTD) method.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.31-38
• /
• 1999

본 논문에서는 수동 관절을 지니는 로봇 매니퓰레이터의 제어를 위하여 퍼지 슬라이딩 모드 기법을 제안하였다. 구동기가 정착되어 있지 않은 수동 관절을 지니는 로봇 매니퓰레이터는 언더액츄에이티트(Underactuated) 시스템의 일종이며 이러한 매니퓰레이터의 제어에 비해 어려운 측면이 있다. 여기서는 불확실성 및 외란이 존재하는 매니퓰레이터 시스템에 대하여 퍼지 슬라이딩 모드 제어를 적용함으로써, 불확실성을 극복하며 채터링 현상이 없는 제어가 가능함을 시뮬레이션을 통해 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권6호
• /
• pp.260-264
• /
• 2002

We developed LD Pumped Nd:$VVO_4$ microchip laser with the cavity length of 1mm. The microchip laser output was 87.5㎽ at the wavelength of 1063.9nm with the input power of 241㎽ at the wavelength of 809nm. The slope efficiency was 40.7% and the threshold input power was 31.1㎽. We have also defined input power limit for the single longitudinal mode operation theoretically. It was 2.5 times larger than that of threshold input intensity. According to the results of simulation, the Nd:YVO$_4$ microchip laser can be operated with the maximum output of 15㎽ for the single longitudinal mode up to the input power of 77.75㎽.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1951-1953
• /
• 2005

This paper present a new disk-type piezoelectric transformer. The input side of the transformer has a crescent-shaped electrode and the output side has a focused poling direction. The piezoelectric transformers operated in each transformer's resonance vibration mode. The electrodes and poling directions on commercially available piezoelectric ceramic disks were designed so that the planar or shear mode coupling factor $(k_p,\;k_{15})$ becomes effective rather than the transverse mode coupling factor ($k_{31}$). A single layer prototype transformer, 26[mm] in diameter and $1.5{\sim}4.0[mm]$ thick, was fabricated, such as step-up ratio, power transformation efficiency and temperature were measured.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.235-240
• /
• 2007

Molecular structures were optimized for the 1,3-diethoxycalix[4]crown-5-ether (2) in the various isomers and their potassium-ion complexes by using B3LYP/6-31+G(d,p)//B1LYP/6-31G(d,p) method after ab initio RHF/6-31G calculation. The cone-shaped isomer of 2 with cr-binding mode has shown the strongest binding efficiency among the six different complexes attributed to seven electrostatic interactions between the potassium cation and the oxygen atoms of crown-5-ether and ethoxy groups of the host (2). The vibrational spectra of 2 and its K+-complexes were obtained by restricted Hartree-Fock (RHF) calculations with the 6-31G basis set. The characteristic vibrational frequencies of various C-O-C stretching and bending motions are analyzed.

• 설비공학논문집
• /
• 제22권1호
• /
• pp.13-20
• /
• 2010

Airborne particulate matters have two modes of size distributions of coarse mode and fine mode. The coarse mode which is formed by break down mechanism of large particles has a peak around the $100\;{\mu}m$, and the fine mode formed by condensation and build up mechanism of evaporated vapors has a peak at several ${\mu}m$. The coarse mode particles can be removed easily by conventional collecting equipments such as a cyclone, an electrostatic precipitator, and a filter, however the fine mode particles can not be collected easily. Usually the fine mode particles are generated in the high temperature conditions especially through boilers and incinerators, so the high efficient and temperature filter is essential for the filtration. In this study, a nano ceramic filter for the removal of fine particles in the high temperature is developed and tested for several characteristics. The nano ceramic filter has double layer of micro and nano structure and the pressure drop and the filtration efficiency for $0.31\;{\mu}m$ at 3 cm/s are 15.45 mmAq, and 96.75%, respectively. The thermal conductivity is $0.038\;W/m{\cdot}K$, and the coefficient of water vapor permeability is $3.63\;g/m^2{\cdot}h{\cdot}mmHg$. It is considered that the sensible heat exchange rate is very poor because the low thermal conductivity but it has high potential to exchange latent heat.

• Journal of Microbiology and Biotechnology
• /
• 제33권2호
• /
• pp.211-218
• /
• 2023

A cryptic plasmid (pTH32) was characterized from Tetragenococcus halophilus 32, an isolate from jeotgal, Korean traditional fermented seafood. pTH32 is 3,198 bp in size with G+C content of 35.84%, and contains 4 open reading frames (ORFs). orf1 and orf2 are 456 bp and 273 bp in size, respectively, and their translation products showed 65.16% and 69.35% similarities with RepB family plasmid replication initiators, respectively, suggesting the rolling-circle replication (RCR) mode of pTH32. orf3 and orf4 encodes putative hypothetical protein of 186 and 76 amino acids, respectively. A novel Tetragenococcus-Escherichia coli shuttle vector, pMJ32E (7.3 kb, Em^r), was constructed by ligation of pTH32 with pBluescript II KS(+) and an erythromycin resistance gene (ErmC). pMJ32E successfully replicated in Enterococcus faecalis 29212 and T. halophilus 31 but not in other LAB species. A pepA gene, encoding aminopeptidase A (PepA) from T. halophilus CY54, was successfully expressed in T. halophilus 31 using pMJ32E. The transformant (TF) showed higher PepA activity (49.8 U/mg protein) than T. halophilus 31 cell (control). When T. halophilus 31 TF was subculturd in MRS broth without antibiotic at 48 h intervals, 53.8% of cells retained pMJ32E after 96 h, and only 2.4% of cells retained pMJ32E after 14 days, supporting the RCR mode of pTH32. pMJ32E could be useful for the genetic engineering of Tetragenococcus and Enterococcus species.

• 대한전자공학회논문지SD
• /
• 제41권9호
• /
• pp.31-37
• /
• 2004

oxide 층의 위치와 두께 조절을 통하여 oxide-VCSEL이 단일모드로 동작하는 활성영역의 반경을 확장하는 방법을 Self-consistent effective-index 방법을 이용하여 제시하였다. 이렇게 활성영역이 넓어지면 고속, 고신뢰도, 고출력 동작에 유리한 단일모드 VCSEL을 만들 수 있게 된다. 고출력을 위하여 단일모드로 동작하는 활성영역을 확대하는 방법을 하면 다음과 같다. 첫째 oxide 층은 활성층에서 멀리 떨어진 곳에 위치시켜야 한다 둘째, oxide 층은 얇게 만들어야 한다. 셋째, oxide층을 node에 위치시켜야 한다. 그리고 고출력을 위하여 p-DBR 쌍의 수를 줄이는 것은 단일모드 동작조건을 변화시키지 않는다. 이 방법을 사용하면 단일모드로 동작하는 oxide-aperture 크기를 3m% 이상 키울 수 있다.

• 한국전자파학회논문지
• /
• 제29권1호
• /
• pp.28-31
• /
• 2018

본 논문에서는 균일원형배열(UCA) 안테나를 이용한 궤도각운동량(OAM) 다중모드 전송시스템의 채널용량에 대하여지면 반사가 미치는 영향을 수치적으로 분석하였다. 지면 반사는 OAM 다중모드 간 간섭을 유발하고 시스템의 심각한 성능 저하를 가져온다. 전송거리가 증가함에 따라 OAM 다중모드 채널용량은 지면 반사의 영향으로 인하여 매우 작아진다. 지면 반사의 영향을 줄이기 위해서는 UCA의 높이를 높이고, 배열 소자의 지향성을 높이는 것이 필요하다.

• 오토저널
• /
• 제6권4호
• /
• pp.36-45
• /
• 1984

The relationship between vehicle driving pattern and fuel consumption in urban area was studied in Seoul along three representative routes using a test car equipped with all the instruments required for recording modes of traffic and measuring fuel consumption. Correlation with idle speed, fuel consumption and CO concentration of car in use was also measured. The average vehicle speed in Seoul was 31.4 km/h and the time spent in different modes was 23.0% in idle mode, 22.5% in acceleration mode, 32.4% in cruising mode and 22.3% in deceleration mode, respectively. Hence, traffic flow was suggested to be relatively smooth. Fuel consumption per unit distance, .phi. was closely related with trip time spent per unit distance, t, and correlation coefficient obtained from the test car was 0.925, and the relationship between .phi. and t was also obtained from the linear regression with the following equation. .phi.=42.87+0.38 t. Idle speed of vehicle in use was mostly adjusted low and cars which were over the permissible standard of CO concentration (4.5%) were 50% or more. As the idle speed decreased, the fuel consumption was decreased, while the CO concentration was increased. Therefore, the decrease of fuel consumption can not be expected with only a decrease in idle speed.