• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3043-3047
• /
• 2009

Nitrogen solubility and nitride formation in liquid 304 Stainless steel has been measured by sampling method at various temperatures. Also values of thermodynamic functions are determined. Nitrogen solubility in molten 304 Stainless steel is increased with temperature and under the 1atm nitrogen atmosphere, titanium nitride is formed over 0.03wt%Ti in 304Stainless steel. Produced nitride is identified TiN by EDS analysis.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2011

Saline corrosion is one of the major degradation mechanisms for stainless steel type 304 (SS304) dry storage cask during the spent fuel interim storage period. Slow strain rate test (SSRT) and neutral salt spray test (NSS) were performed at $85^{\circ}C$ and $200^{\circ}C$ with 0.5 wt% sodium chloride mist sprayed on the cold-rolled SS304 specimens of different degrees of reduction in this study. The weight changes of the NSS specimens tested at $85^{\circ}C$ for 2000 hours differed greatly from those at $200^{\circ}C$. The weight loss of NSS specimens was not significant at $85^{\circ}C$ but the weight gain decreased gradually with increasing the cold-rolled reduction. The yield strength (YS) and ultimate tensile stress (UTS) values obtained from the SSRT tests for lightly cold-rolled specimens in the salt spray environment at $85^{\circ}C$ and $200^{\circ}C$ are slightly lower than in air. But for those with 20% reductions, the specimen strengths were no longer changed by the saline corrosion. The preliminary results demonstrated that the quality and performance of cold-rolled SS304 is acceptable for fabrication of dry storage casks. However, more work on the corrosion behavior of cold-rolled stainless steel in the saline atmosphere is needed to better understand its long-term performance.

• 월간 기계설비
• /
• s.256
• /
• pp.66-67
• /
• 2011

스테인레스강은 철과 니켈, 크롬이 주 성분이다. 그 중에서 니켈이 차지하는 비율은 304계열 제품의 경우 8%에 불과하다. 그런데 STS 파이프 등 스테인레스 스틸 제품 원가의 60%를 차지하는 것이 니켈 가격이다. 결국 니켈 가격이 스테인레스 스틸 제품 가격을 좌지우지한다고 볼 수 있다. 우리 설비건설분야에서도 스테인레스 관련 제품이 공종에 따라 많이 투입되는 경우가 있다. 이번 호에서는 니켈의 국제 시세를 중심으로 스테인레스 제품 가격을 분석해 보고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.409-414
• /
• 2013

In this work, corrosion of 304 stainless steel was evaluated by using acoustic emission(AE) technique. AE measurement system was set for detecting acoustic signal during accelerated corrosion test of the specimen. AE signal started to be detected after the time of pitting corrosion initiation was evaluated by anodic polarization curve. Pitting corrosion damage was confirmed by optical microscopic observation of the surface morphology. AE cumulative counts and amplitude according to corrosion time could be divided into three stages. These trends were discussed in relation with changing pitting corrosion mechanism. Feasibilities of AE technique for evaluation of corrosion damage and mechanism were suggested.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.104.1-104.1
• /
• 2013

스테인레스강 진공용기의 기체방출률을 낮추기 위해 구연산을 사용하여 화학세척한 후 진공 중 산화처리(VTO)하였다. 1E-11 mbar 이하의 극고진공에 도달하기 위해서는 진공펌프의 성능 뿐 아니라 진공 용기 자체로부터 지속적으로 방출되는 수소의 양을 줄이는 것이 중요하다. 스테인레스 강의 경우 잘 형성된 표면의 크롬산화막이 수소 방출을 억제하는데 효과가 있다고 알려져 있다. 구연산은 스테인레스 강의 표면 철 성분을 감소시키므로 상대적으로 크롬 비율을 증가한다. 이렇게 표면의 크롬 비율이 증가한 상태로 VTO 처리하면 보다 순수하고 균일한 크롬산화막이 형성될 것으로 기대할 수 있다. 본 발표에서는 구연산 +VTO 처리한 스테인레스 강(SST304) 진공 용기의 기체방출률 측정결과에 대해 논의하고자 한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.37.1-37.1
• /
• 2006

• Proceedings of the KWS Conference
• /
• 1997.05a
• /
• pp.105-106
• /
• 1997

• Proceedings of the KWS Conference
• /
• 1998.05a
• /
• pp.131-132
• /
• 1998

• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.134-137
• /
• 1999

• Proceedings of the KWS Conference
• /
• 1992.10a
• /
• pp.119-121
• /
• 1992