• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.1
• /
• pp.31-40
• /
• 2022

Six Sigma is a philosophy and systematic methodology for quality improvement. It encourages continuous quality improvement efforts to achieve the ideal goal of 6σ. Sigma(σ) is a statistic representing the standard deviation of the normal distribution, and 6σ level means a level where the tolerance of the specification is six times the standard deviation of the process distribution. In terms of the defective rate, the 6σ level achieves the 0.002 defectives per one million units. However, in the field, the 6σ level is used in the sense of achieving 3.4 defects per one million opportunities, which shows a large gap from the 6σ level in the statistical viewpoint. This is because field practitioners accept a 1.5σ shift of the mean of process when calculating the defective rate under sigma level. It said that the acceptance of 1.5σ shift of the mean is from experience, but there is no research or theoretical explanation to support it logically. Although it is a non-scientific explanation based on experience, considering that there has been no objection to the 1.5σ shift for a long time and it is rather accepted, it is judged that there is a reasonable basis for the 1.5σ shift. Therefore, this study tries to find a reasonable explanation through detective power of control chart via the run-rules to the 1.5σ shift empirically recognized by practitioners.

• Archives of design research
• /
• v.15 no.3
• /
• pp.241-248
• /
• 2002

Researches of Hangul automation have been focused mainly on the set of character system. But, practical problem of using the Korean standard keyboard system of two sets is increment of errors and fatigue due to frequent use of shift keys. The author formulate a hypothesis as follows to solve the problem. 'Changing location and design of shift keys can reduce errors in typing Korean by avoiding interferences with other keys when pressing shift keys.' This study verify the hypothesis by the analysis of experiments using improved keyboard prototypes which have changed layout and design of shift keys. On the result, change of shift key location causes confusion to experienced user. But, while keeping its location, removing other keys at the bottom row and magnifying size of shift keys decrease errors in typing by avoiding interferences. And, the efficiency of typing in Korean is increased, too, because there is not any influence on typing speed. This study focuses on layout and design of shift keys only, but further study for entire layout of keyboard including alternative location of other function keys is needed to improve general usability.

• Journal of Digital Policy
• /
• v.2 no.2
• /
• pp.21-33
• /
• 2023

The purpose of this study was to explore the night duty experience on the personal life of fixed night shift nurses working in various health care delivery systems. Data collection was conducted through three focus group interviews from September to October 2022, The subjects of the study were 13 nurses working fixed night shift. For analysis, all interviews were recorded and transcribed and analyzed using qualitative content analysis. In results, 5 themes, 11 categories and 24 subcategories were derived. The five themes were 'it's a voluntary choice', 'efforts to adapt to the shift', 'awareness about fixed night shift', and 'hope to improve the system'. The study aims to help understand fixed night shift work and systems by showing various night-duty experiences on the personal life of the nurses and to provide basic data for preparing measures to improve the system.

• Journal of Korean Academy of Nursing Administration
• /
• v.11 no.3
• /
• pp.275-288
• /
• 2005

Purpose: The Purpose of this study was to identify reasons behind the high turnover rate of nurses, and to delineate measures for inactive nurses to participate in professional nursing activities so as to upgrade the quality of the health care delivery system in Korea. Thus, tried this study to drive market entry of these idleness manpower. Methods: This study used the action research, to collect idea from hospital/nurse administrators, nurses on the job, part-time nurses. Results: This study basic data about flexible shift form through scientific paper, Internet, individual contact source collection do, and compare each situation by direct conversation with a nurse, director of a hospital, nursing administrators about flexible shift form, and analyze example of hospital which utilize flexible shift form actually or utilized and deduced advantage, shortcoming, cause of failure, cause of success, other application plan. Conclusions: 1. Emphasize that database about idleness manpower should be put priority certainly. 2. In case of idleness manpower wants a re-employment hospital and institution which can connect to administer demonstration premise . 3. Emphasize that need organ to enforce education program and this that idleness manpower can apply in nursing spot. 4. Premise nurse's great people image and research about method that convert productivity of nursing to money.

• International Journal of Arrhythmia
• /
• 제18권2호
• /
• pp.66-76
• /
• 2017

Background and Objectives: Although an anterior linear ablation is an effective lesion set in radiofrequency catheter ablation (RFCA) for longstanding persistent atrial fibrillation (L-PeAF), its durability for bidirectional block (BDB) is only about 60% at repeat procedure. We hypothesized that changes in electrocardiogram (ECG) may predict an anterior line block state and the clinical outcome of L-PeAF ablation. Subjects and Methods: We studied 304 L-PeAF patients (77% male, $60{\pm}10yrs$), who consistently underwent RFCA Dallas lesion set (circumferential pulmonary vein isolation, posterior box lesion, and anterior line) protocol with subsequent comparison of pre-procedural and post-procedural P wave axes, and one year follow-up (n=205) sinus rhythm (SR) ECGs. Results: 1. P wave axis shifted inferiorly at immediate post-procedure (p<0.001), and was independently correlated with BDB of anterior line (${\ss}=10.4$, 95% confidence interval [CI] 2.79-17.94, p=0.008). 2. The degree of post-procedural inferior shift of P wave axis did not reflect clinical recurrence within one-year (n=205, p=0.923), potentially due to conduction recovery of an anterior line. However, among 160 patients without clinical recurrence within one-year, P wave axis at one-year ECG was independently associated with very late recurrence of AF after one-year (n=160, hazard ratio [HR] 0.98; 95% CI 0.97-0.99, p=0.001), during $45.6{\pm}16.7$ months of follow-up. 3. Among 22 patients who underwent repeat procedures, P wave axis shift was more significant in patients with maintained BDB of an anterior line than in those without (p=0.015). Conclusion: An inferior shift of P wave axis reflects the achievement and the maintenance of an anterior line BDB, and is associated with better long-term clinical outcome after catheter ablation for L-PeAF based on Dallas lesion set.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.93-100
• /
• 2008

Laser interferometry is widely used as a measuring system in many fields because of its high resolution and ability to measure a broad area in real-time all at once. In conventional LASER interferometry, for example Out-of-plane ESPI(Electronic Speckle Pattern Interferometry), In plane ESPI, Shearography and Holography, it uses PZT or other components as a phase shift instrumentation to extract 3D deformation data, vibration mode and others. However, in most cases PZT has some disadvantages, which include nonlinear errors and limited time of use. In the present study, a new type of LASER interferometry using a laser diode is proposed. Using LASER Diode Sinusoidal Phase Modulating (LD-SPM) interferometry, the phase modulation can be directly modulated by controlling the LASER Diode injection current thereby eliminating the need for PZT and its components. This makes the interferometry more compact. This paper reports on a new approach to the LD Modulating interferometry that involves four-buckets phase shift method. This study proposes a four-bucket phase mapping algorithm, which was developed to have a guaranteed application, to stabilize the system in the field and to be a user-friendly GUI. In this paper, the theory for LD wavelength modulation and sinusoidal phase modulation of LD modulating interferometry is shown. Four-bucket phase mapping algorithm is then introduced.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.384-392
• /
• 2015

This paper presents an economic assessment of large-scale Li-ion battery energy storage systems applied to Korean power system. There are many applications of the battery energy storage systems (BESSs) and they can provide various benefits to power systems. We consider BESSs to the energy time-shift application to Korean power system and evaluate the benefits from the application of BESS in the social perspective. The mixed integer programming (MIP) algorithm is used to resolve the optimal operation schedule of the BESS. The social benefits can include the savings of the fuel cost from generating units, deferral effects of the generation capacity, delay of transmission and distribution infra construction, and incremental CO2 emission cost impacts, etc. The economic evaluation of the BESS is separately applied into Korean power systems of the Main-land and Jeju island to reflect the differences of the load and generation patterns.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.34-43
• /
• 2009

In this thesis, we explain developing processes of the power transmission system for lift truck. Conventional power transmission system had some problems such as spatial constraints or low speed and high torque problem. Because conventional power transmission system was mainly designed for high speed vehicles. In this paper we developed power shift drive axle specialized for $2.0{\sim}3.5$ ton lift truck. Innovative structure of transmission which is built in inside axle, enables to reduce system weight and size by 40% compared to the conventional power transmission system. Also, it is possible to do additional functions such as auto parking system and anti-roll back system.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.68-69
• /
• 2014

In the battery based applications such as electric vehicle and energy storage system, the performance of the system highly depends on the reliability of the battery. However, it is difficult to obtain the accurate information about the state-of-health (SOH) of battery during its operation. In this paper a 3kw battery charger with battery diagnosis function which can estimate the SOH of the battery by using online impedance spectroscopy technique is introduced. For the charger phase shift full bridge converter with synchronous rectification has been adopted to implement the charge and diagnosis functions. The impedance spectroscopy is performed after the charge to obtain the information about the internal impedance of the battery module, hence the SOH can be estimated online by observing the impedance variation of the battery over time. All the design procedure of the proposed charger is detailed and the feasibility of the system is verified by the experimental results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.10-21
• /
• 1996

In this study, as a strategy to improve shift characteristics, the authors developed a new style pressure modulator which can reduce shock torque during power shift by modulating the pattern of pressure increase in the cylinder for actuating the clutch. The remarkable merits of this new pressure modulator lie in its structural simplicity and durability, because the modulator is only composed of a poppet type valve and a few orifices. The usefulness of the new pressure modulator is confirmed by experiments and numerical analyses on a clutch control hydraulic system simplified for easy test. Also, the excellency of the transmission with the new pressure modulator is verified by experiments on a test bench for simulating the running power train of an excavator.