• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.297-298
• /
• 2010

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.3 s.13
• /
• pp.49-56
• /
• 2004

This paper predicted the shear deformation, such as strain of shear reinforcement and shear track width, of reinforced concrete (RC) members using Transformation Angle Truss Model (TATM) in order to apply to the shea, analysis of RC buildings. To check the validity of TATM for the shear deformation of RC beams, four RC beams with different shear span-to-depth ratios were cast, instrumented and tested. Observed results were compared with theoretical results by MCFT(Response-2000), RA-STM, FA-STM, and TATM. The proposed model, TATM, better predicted the relationships of the shear stress-strain of shear reinforcement and the shear stress-shear track width than other truss models.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1605-1612
• /
• 2016

Quinolone-resistant Salmonella strains were isolated from patient samples, and several quinolone-sensitive strains were used to analyze mutations in the quinolone resistance-determining region (QRDR) of gyrA, gyrB, parC, and parE and to screen for plasmid-mediated quinolone resistance. Among the 21 strains that showed resistance to nalidixic acid and ciprofloxacin (MIC 0.125-2.0 μg/ml), 17 strains had a mutation in QRDR codon 87 of gyrA, and 3 strains had a single mutation (Ser83 → Phe). Another cause of resistance, efflux pump regulation, was studied by examining the expression of acrB, ramA, marA, and soxS. Five strains, including Sal-KH1 and Sal-KH2, showed no increase in relative expression in an analysis using the qRT-PCR method (p < 0.05). In order to determine the genes involved in the resistance, the Sal-9 isolate that showed decreased susceptibility and did not contain a mutation in the gyrA QRDR was used to make the STM (MIC 8 μg/ml) and STH (MIC 16 μg/ml) ciprofloxacin-resistant mutants. The gyrA QRDR Asp87 → Gly mutation was identified in both the STM and STH mutants by mutation analysis. qRT-PCR analysis of the efflux transporter acrB of the AcrAB-TolC efflux system showed increased expression levels in both the STM (1.79-fold) and STH (2.0-fold) mutants. In addition, the expression of the transcriptional regulator marA was increased in both the STM (6.35-fold) and STH (21.73-fold) mutants. Moreover, the expression of soxS was increased in the STM (3.41-fold) and STH (10.05-fold) mutants (p < 0.05). Therefore, these results indicate that AcrAB-TolC efflux pump activity and the target site mutation in gyrA are involved in quinolone resistance.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.403-406
• /
• 2006

The surface structure and electrochemical behavior of self-assembled monolayers (SAMs) formed by aromatic thiols on Au(111) were investigated by scanning tunneling microscopy (STM) and cyclic voltammetry. Benzenethiol (BT) forms disordered phases on Au(111) which are composed of many bright domains, while benzyl mercaptan (BM), with a methylene unit between the aromatic group and sulfur atom, forms twodimensional ordered SAMs on Au(111). In addition, two phase-separated domains consisting of disordered and ordered phases were observed in binary SAMs formed from a 1 : 1 mixed ethanol solution of BT and BM. From STM and CV measurements, we found that the blocking efficiency of aromatic thiol SAMs coated on an Au(111) electrode for an electron transfer reaction decreases as the structural order of the SAMs increases. Molecular-scale STM and CV results obtained here will be very useful in designing functional SAMs for further applications, such as the improvement of corrosion passivation of Au(111) on an aromatic thiolmodified Au(111) surface.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2623-2627
• /
• 2011

We investigated the surface structure and wetting behavior of octaneselenolate self-assembled monolayers (SAMs) on Au(111) formed in a 50 ${\mu}M$ ethanol solution according to immersion time, using scanning tunneling microscopy (STM) and an automatic contact angle (CA) goniometer. Closely-packed, well-ordered alkanethiol SAMs would form as the immersion time increased; unexpectedly, however, we observed the structural transition of octaneselenolate SAMs from a molecular row phase with a long-range order to a disordered phase with a high density of vacancy islands (VIs). Molecularly resolved STM imaging revealed that the missing-row ordered phase of the SAMs could be assigned as a $(6{\times}{\surd}3)R30^{\circ}$ superlattice containing three molecules in the rectangular unit cell. In addition, CA measurements showed that the structural order and defect density of VIs are closely related to the wetting behaviors of octaneselenolate SAMs on gold. In this study, we clearly demonstrate that interactions between the headgroups and gold surfaces play an important role in determining the physical properties and surface structure of SAMs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1731-1739
• /
• 1993

An application of Scanning Tunneling Microscopy(STM) is investigated for the measurement of 3-dimensional profiles of the macro-machined patterns of which critical dimensions lie in the range of submicrometers. Special emphasis of this investigation is given to extending the measuring ranges of STM upto the order of several micrometers while maintaining superb nanometer measuring resolution. This is accomplished by correcting hysteresis effects of piezoelectric actuators by using non-linear compensation models. Detailed aspects of design and control of a prototype measurement system are described with some actual measuring examples in which fine It patterns can successfully be traced with a resolution of 1 nanometer over a surface range of $4{\times}2$ micrometers.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.2
• /
• pp.213-218
• /
• 2001

Presented are the STM images of self-assembled monolayer of 2-mercaptoethanol on Au(111). Striped structures of ($6{\times}3_{\frac{1}{2}}$), ($5{\times}3_{\frac{1}{2}}$), ($4{\times}3_{\frac{1}{2}}$) and compact-($5{\times}3_{\frac{1}{2}}$) were observed after annealing at $80^{\circ}C.$ Analysis of the ordered structures revealed that the basic fundamental units of the ordered structures were three crystallographically non-equivalent ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$) $R30^{\circ}$ assemblies, and that the way of combination of the assemblies produced the four different structures. The($6{\times}3_{\frac{1}{2}}$) structure ( $\theta$ = 0.33) was composed of one ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$)$R30^{\circ}$ assembly, while the ($5{\times}3_{\frac{1}{2}}$) ( $\theta$ = 0.30) and ($4{\times}3_{\frac{1}{2}}$) ( $\theta$ = 0.38) structures were consisted of two ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$) $R30^{\circ}$ assemblies, separated by 5a and 4a, respectively. Furthermore, the compact-(5X 3½) structure ( $\theta$ = 0.50) was obtained by overlapping three ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$) $R30^{\circ}$ assemblies. In spite of the diversity in the adsorption structures, all the adsorption sites of 2-mercaptoethanol were fundamentally identical. On the other hand, the unannealed primitive SAM of 2-mercaptoethanol was characterized by two observations: a short-range order keeping the adsorbed molecules at approximately $3_{\frac{1}{2}}$ a and the small domains of the striped structures supporting that the observed surface structures on the annealed surface were the extension of the primitive layer of 2-mercaptoethanol. Comparing these observations with the already published structures of ethanthiol, it was concluded that the interaction between the hydroxyl groups of 2-mercaptoethanol might play a significant role in the adsorption step of 2-mercaptoethanol on Au(111) to organize the adsorption structures different from those of ethanthiol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2081-2093
• /
• 1994

In this study, we design and implement 64 QAM demodulator which has 155 Mbps, first level of CCITT G707 SDH(Synchronous Digital Hierachy) for STM 1 signal transmission. Carrier recovery which effects the demodulator performance uses decision feedback carrier using 8 bits A/D converter. Also, PSF(Pulse Shaping Filter) is 7 order elliptic filter. Carrier recovery circuit is designed and implemented digital type which use high 3 bits of 8 bits conversion data as data and the order low bits as error data and hybrid type which use VCO and analog integrator. Therefore we obtain stable performance recovery.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.18-27
• /
• 1996

By integrating WDM to OPS unit which plays an improtant role for the reliability of CPN, we made it possible to provide CATV, VOD, and high-speed data services simultaneously and to meet easily the requirements for new services in the future. For the design of optimal system, the link analysis of power budget has been perfomred. Also, the prototyped system has been tested with STM-1 level signals to confirm functions such as transmission, distribution, and protection. The results proved that when occurred out-of-order or recovery of ONU, the system did the pertinent switching with minimum loss for high-speed data services. Also for video distribution services, the system has distributed STM-1 level signals sucessfully.

• The Journal of Information Systems
• /
• v.30 no.3
• /
• pp.201-216
• /
• 2021

Purpose The purpose of this study is to analyze the trend of patent technology in textile materials using text mining methodology based on Dynamic Embedded Topic Model and Structural Topic Model. It is expected that this study will have positive impact on revitalizing and developing textile materials industry as finding out technology trends. Design/methodology/approach The data used in this study is 866 domestic patent text data in textile material from 1974 to 2020. In order to analyze technology trends from various aspect, Dynamic Embedded Topic Model and Structural Topic Model mechanism were used. The word embedding technique used in DETM is the GloVe technique. For Stable learning of topic modeling, amortized variational inference was performed based on the Recurrent Neural Network. Findings As a result of this analysis, it was found that 'manufacture' topics had the largest share among the six topics. Keyword trend analysis found the fact that natural and nanotechnology have recently been attracting attention. The metadata analysis results showed that manufacture technologies could have a high probability of patent registration in entire time series, but the analysis results in recent years showed that the trend of elasticity and safety technology is increasing.