• 문화기술의 융합
• /
• 제10권1호
• /
• pp.379-386
• /
• 2024

연구의 목적은 자연의 소중함을 깨닫게 된 코로나 시대를 거치면서 자연의 다양한 모티브 중에서 개체 수의감소가 환경오염의 척도로 상징되는 나비, 곤충 등의 표현 빈도가 증가하는 것에 주목하고자 하였다. 본 연구의 범위는 2019년부터 2023년까지의 패션컬렉션을 대상으로 온라인 <보그>지(www.vogue.com)의 시즌별 패션컬렉션 패션쇼 사진과 인터뷰 기사로 한정하였다. 연구 결과 185개의 나비모티브 의상이 나타났으며 평면적 표현방식의 유형으로는 디지털 프린팅 기법이 가장 많이 활용되었다. 이와 함께 퀼팅, 자수, 비딩 등의 기법들이 나비의 평면적 모티브를 표현하는 기법으로 많이 등장하였다. 입체적 표현 유형으로는 3D 프린팅, 레이저 컷팅, 코사지 기법, 드레이핑 기법을 사용한 유형들이 비슷한 비중으로 나타났다. 표현된 나비 모티브는 추상적인 표현보다는 나비의 형태를 그대로 묘사한 사실적인 디자인이 더 많았음을 알 수 있었다. 결론적으로 최근 5년간의 나비모티브 패션디자인은 과거의 나비모티브 패션에 비해 환경에 대한 메시지를 강하게 담고 있음을 알 수 있었다. 단순히 나비의 형태적 아름다움과 화려한 디자인 요소를 넘어서 친환경 메시지를 전달할 수 있는 상징적 의미가 큰 모티브임을 확인할 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.43.1-43.5
• /
• 2019

Background: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model. Case presentation: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. Conclusion: We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.

• 한국정보통신학회논문지
• /
• 제23권2호
• /
• pp.215-222
• /
• 2019

4차 산업에 대한 꾸준한 투자와 기술 개발로 스마트 팩토리 기술이 더욱 안정화되고 3D 프린팅을 포함한 관련 기술개발이 더욱 활발해진다면, 스마트 팩토리 도입비용이 낮아지고 현재의 고가의 상품 제조에 집중되는 현상에서 벗어나 소량 맞춤형 주문 제작을 위한 서비스로 변화 될 것이라고 기대한다. 그러나 소량의 주문제작을 위해 제3자에게 개인정보를 제공해야 하고 복잡한 결제시스템을 거쳐야 한다면 발전되는 기술에 비해 활용도는 그에 미치지 못할 수 있다. 이 논문에서는 기존 사물인터넷의 한계를 극복하고 새로운 패러다임을 가져다 줄 것으로 기대하는 블록체인 기술 융합의 스마트 팩토리 환경에서 프라이버시와 익명성을 제공하는 고객 맞춤형 제문제작을 위한 프로토콜을 제안한다. 제작자의 평판을 반영하여 고객 주문에 활용하고 주문 내용이 제작자 외에는 공개되지 않도록 프라이버시를 제공하는 고객 맞춤형 주문제작 방법을 제안하였다. 또한 제안하는 프로토콜의 요구사항을 검증하였고 관련연구와의 비교를 통하여 독창성을 확인하였다.

• 한국의상디자인학회지
• /
• 제22권3호
• /
• pp.1-17
• /
• 2020

The Peking Opera is one of the most representative cultural aspects of China. It includes China's traditional specialties, such as stage performance, stage background, and costumes. The purpose of this study is to investigate the characters and the costume characteristics of the Peking Opera to present fashion design. This research is meaningful for spreading the Peking Opera to the world by applying China's traditional costumes to fashion design. Based on the cultural background of the Peking Opera and the analysis of the opera costume, four sets of women's clothes were made by using the traditional Chinese elements. The conclusions are as follows. First, traditional features such as patterns, colors, and styles from Peking Opera costumes were used in fashion design. The colors and patterns use Chinese traditional aesthetics to carry out contemporary fashion design and apply creative materials. Second, the neoprene used to create the items is a material suitable for the modern design of the traditional Peking Opera costumes. Neoprene has good elasticity and can be cut and sewn in a variety of ways. It can also satisfy the three-dimensional atmosphere and rich morphological changes found in Peking Opera costumes. In addition, a combination of thin chiffon and mesh materials is also suitable for the development of modern designs. Finally, in order to show the effects of traditional works, the patterns were finished by hand-painting. The hand-painted works were then scanned and printed on the material by the digital printing techniques. At the conclusion, the traditional features and feelings of the contemporary designs were presented.

• 대한치과교정학회지
• /
• 제53권4호
• /
• pp.254-263
• /
• 2023

Objective: The evidence on the accuracy of bite registration using intraoral scanners is sparse. This study aimed to develop a new method for evaluating bite registration accuracy using intraoral scanners. Methods: Two different types of models were used; 10 stone models and 10 with acrylic resin teeth. A triangular frame with cylindrical posts at each apex (one anterior and two posteriors) was digitally designed and manufactured using three-dimensional (3D) printing. Such a structure was fitted in the lingual space of each maxillary and mandibular model so that, in occlusion, the posts would contact their opposing counterparts, enforcing a small interocclusal gap between the two arches. This ensured no tooth interference and full contact between opposing posts. Bite registration accuracy was evaluated by measuring the distance between opposing posts, with small values indicating high-accuracy. Three intraoral scanners were used: Medit i500, Primescan, and Trios 4. Viewbox software was used to measure the distance between opposing posts and compute roll and pitch. Results: The average maximum error in interocclusal registration exceeded 50 ㎛. Roll and pitch orientation errors ranged above 0.1 degrees, implying an additional interocclusal error of around 40 ㎛ or more. The models with acrylic teeth exhibited higher errors. Conclusions: A method that avoids the need for reference hardware and the imprecision of locating reference points on tooth surfaces, and offers simplicity in the assessment of bite registration with an intraoral scanner, was developed. These results suggest that intraoral scanners may exhibit clinically significant errors in reproducing the interocclusal relationships.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.282-287
• /
• 2023

본 연구에서는 Laser Powder bed fusion(L-PBF) 공정을 사용하여 제작된 Ti-6Al-4V 합금 적층성형품의 응력제거 열처리 온도와 시간의 변화에 따른 미세조직, 잔류응력 그리고 경도의 변화를 연구하였다. 잔류응력 제거를 위한 열처리 시험 결과 823 K에서는 240분, 873K에서는 60분 이상 열처리시 치수변화 및 기계적 특성 저하를 야기하는 결정립 성장 및 상변화 발생 없이 대부분의 잔류응력이 3 0 MPa 이하로 감소되는 것을 확인하였다. 또한, 열처리 온도 및 시간의 증가와 함께 경도가 증가하는 경향을 보였다. 이러한 결과는 XRD 및 SEM-EBDS의 phase map 분석을 통해 확인되지 않지만, 773~873 K 온도범위에서 등온 열처리시 국부적인 침상 Martensitic α' 상의 미세화가 원인으로 추정된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.35.1-35.7
• /
• 2019

Background: The purpose of this study was to measure the time of the conventional surgical planning (CSP) and virtual surgical planning (VSP) in orthognathic surgery and to compare them in terms of cost. Material and method: This is a retrospective study of the patients who underwent orthognathic surgery at the Pusan National University Dental Hospital from December 2017 to August 2018. All the patients were analyzed through both CSP and VSP, and all the surgical stents were fabricated through manual and three-dimensional (3D) printing. The predictor variables were the planning method (CSP vs. VSP) and the surgery type (group I: Le Fort I osteotomy + bilateral sagittal split osteotomy [LFI+BSSO] or group II: only bilateral sagittal split osteotomy [BSSO]), and the outcomes were the time and cost. The results were analyzed using the paired t test. Results: Thirty patients (12 females, 18 males) met the inclusion criteria, and 17 patients were excluded from the study due to missing or incomplete data. There were 20 group I patients (LFI+BSSO regardless of genioplasty) and 10 group II patients (BSSO regardless of genioplasty). The average time of CSP for group I was 385 ± 7.8 min, and that for group II was 195 ± 8.33 min. The time reduction rate of VSP compared with CSP was 62.8% in group I and 41.5% in group II. On the other hand, there was no statistically significant cost reduction. Conclusions: The time investment in VSP in this study was significantly smaller than that in CSP, and the difference was greater in group I than in group II.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.110-120
• /
• 1986

본 45。충돌분사에서는 충돌분류의 평균속도, 난류강도, 난류전단응력등을 측정분석하여 기 연구발표한 자료를 토대로 하여 난류의 충돌배합이 활발히 일어나는 영역(X/X$_{0}$=2,3,4)에서 충돌분류의 특성을 통계학적으로 측정연구코저 한다. 따라서 각방향으로 발생하는 난류성분을 Gauss의 확률분포식과 비교검토하고, 2차원 결합확률정도선도를 측정도시하여 2방향의 난류성분들의 결합난동형상을 온라인 컴퓨 터 시스템에 의하여 분석할 계획이다. 또한 난류성분의 고차모멘트를 측정하여 비대칭도와 편평도등도 연구 구명코저 한다.다.

• 대한치과기공학회지
• /
• 제43권2호
• /
• pp.48-55
• /
• 2021

Purpose: This study aimed to analyze deformation according to post-curing of complete arch artificial teeth for temporary dentures printed with a digital light processing (DLP) printer. Methods: An edentulous model was prepared and an occlusal rim was produced. The edentulous model and occlusal rim were scanned using a model scanner. A complete denture was designed using a dental computer-aided design, and the denture base and artificial tooth were separated. Ten complete arch artificial teeth were printed using a 3D printer (DLP). Complete arch artificial teeth was classified into the following three groups: a group no post-curing (NC), a group with 10 minutes post-curing (10M), and a group with 20 minutes post-curing (20M). Specimens were scanned using a model scanner. The scanned data were overlapped with the reference data. Statistical analysis was performed using one-way ANOVA analysis of variance, Kruskal-Wallis test, and Mann-Whitney U test (α=0.05). Results: Regarding the overall deviation of complete arch artificial teeth, the NC group showed the lowest mean deviation of 111.13 ㎛ and the 20M group showed the highest mean deviation of 131.03 ㎛. There were statistically significant differences among the three groups (p<0.05). Conclusion: The complete arch artificial tooth showed deformation due to post-curing. In addition, the largest shrinkage deformation was observed at 10 minutes of post-curing, whereas the least deformation was observed at 20 minutes.

• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.