• 기술사
• /
• 제16권3호
• /
• pp.68-73
• /
• 1983

IC전자부품 중 DIP계 종류를 바렐을 사용하여 주석도금 할 때에 그 전착현상을 조사하여 부분전류의 동태를 설명할 수 있는 변화인자를 알아보려 하였다. DIP와 같은 모양인 IC부품은 부분전도체로 구분되어지며 그 전착상태를 one-dimensional model로 분석하였을때, 가입전류밀도, 바렐의 회전속도, 용액중 금속이온 농도와 깊은 관계가 있음을 보인다. 다공질과 같은 것으로 간주한 one-dimensional model로서 의 이론식은 J=$\delta$'/$\beta$-{-c$^3$/${\gamma}$-exp-(1-$\alpha$)n$\Phi$}로 표현된다.

• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.36-38
• /
• 2016

Fibrous dysplasia is a relatively rare disease but the management would be quite challenging. Because this is not a malignant tumor, the preservation of the facial contour and the various functions seems to be important in treatment planning. Until now the facial bone reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for facial bone reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile, various types of allogenic and alloplastic materials have been also used. However, facial bone reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original maxillary anatomy as possible using the 3D printing model, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we molded Titanium mesh to reconstruct three-dimensional maxillary structure during the operation. This prefabricated Titanium-mesh implant was then inserted onto the defected maxilla and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be successful in this patient. Individualized approach for each patient could be an ideal way to restore the facial bone.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.174-177
• /
• 2000

In this paper, The bulging behavior of the solidified shell in continuously cast slabs have been numerically analyzed using three-dimensional elasto-plastic and creep finite element method Three-dimensional model has been applied in order to investigate the effect of the narrow face shell on restraining the bulging deflection. Solidification analysis are carried out by two-dimensional finite difference method. In this way, strains occurring at the solidification front near the narrow face of the slab, as well as those occurring in the board face have been computed. The adequacy of the model has been checked against the experimental results. In addition, the effect of the slab width and casting speed on the bulging are discussed.

• 한국과학교육학회지
• /
• 제16권3호
• /
• pp.270-277
• /
• 1996

The purpose of this study is to classify and state of evaluating objectives using three-dimensional assessment framework of science inquiry. The first, as an attempt to provide a theoretical base for developing an assessment framework taxonomies and classificatory schemes of educational objectives were analyzed Bloom's taxonomy, Klopfer's specification, NAEP(National Assessment of Educational Progress), and APU(Assessment of Performance Unit) framework. The second, three-dimensional assessment framework use in this study has formed a clear definition of three-dimensional matrix. These three dimensions consists of content, context and process. The third, the model of three-dimensional taxonomy of science inquiry developed in this study is presented. In addition, an example of classification and statement of evaluating objectives based on the model is presented.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1299-1307
• /
• 2014

본 논문은 감도가 낮고 정밀한 족적센서의 특성에 대하여 연구한 논문이다. 이를 위하여 센서의 형상 변수 조절 범위를 낮게 선정하였다. 센서의 감도 해석으로 2차원 해석 모델을 사용할 경우 실험값과 비교한 결과 오차가 많이 나는 것을 확인하였다. 따라서 이 오차를 개선하기 위하여 3D 기반의 새로운 해석 모델을 적용시켜 재해석 하였고, 이를 실험값과 비교한 결과 오차가 개선되었음을 확인할 수 있었다.

• 융합신호처리학회논문지
• /
• 제6권3호
• /
• pp.112-119
• /
• 2005

본 논문에서는 심리학 생리학적 지식을 기초로 하여 좌우 망막을 양안 입체시로 대응시켜 얻은 2매의 화상으로부터 깊이 정보를 추출하는 신경회로 모델을 제안하고 3차원 표면의 복원법을 검토한다. 화상의 특징을 근거로 하여 시차를 추출할 경우, 경계 부분에 유사한 특징이 반복된다면 경우 올바른 깊이 정보를 검출할 수 없다. 본 논문에서 제안된 신경회로 모델은 시차의 추출, 시차의 통합, 시차의 보간에 의하여 시차를 결정한다. 또한, 깊이 정보를 보간하여 3차원 형상을 복원하고 그 복원된 3차원 형상에 좌입력 화상을 투영하여 3차원 표면을 복원하는 법을 제안하고, 실험을 통하여 시차 추출 시간을 대폭 줄일 수 있음을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.326-332
• /
• 2013

PURPOSE. The purpose of this study was to compare stress distributions of implant-supported crown placed in fibula bone model with those in intact mandible model using three-dimensional finite element analysis. MATERIALS AND METHODS. Two three-dimensional finite element models were created to analyze biomechanical behaviors of implant-supported crowns placed in intact mandible and fibula model. The finite element models were generated from patient's computed tomography data. The model for grafted fibula was composed of fibula block, dental implant system, and implant-supported crown. In the mandible model, same components with identical geometries with the fibula model were used except that the mandible replaced the fibula. Vertical and oblique loadings were applied on the crowns. The highest von Mises stresses were investigated and stress distributions of the two models were analyzed. RESULTS. Overall stress distributions in the two models were similar. The highest von Mises stress values were higher in the mandible model than in the fibula model. In the individual prosthodontic components there was no prominent difference between models. The stress concentrations occurred in cortical bones in both models and the effect of bicortical anchorage could be found in the fibula model. CONCLUSION. Using finite element analysis it was shown that the implant-supported crown placed in free fibula graft might function successfully in terms of biomechanical behavior.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.489-496
• /
• 1999

The safety of a structure can be improved by applying the three dimensional passive earth pressure. Because the three dimensional passive earth pressure is much larger than the two dimensional passive earth pressure and it is determined by the size(width B and height H) and the wall frictional angle of the resistant wall. Therefore, the three dimensional passive resistance behavior was studied through the model tests in sandy ground, where the size of the resistant wall and the wall frictional angle were varied. The results show that three dimensional passive earth pressure is 1.1∼3.4 times larger than that of the two dimensional value depending on the wall size and the wall friction.

• 대한기계학회논문집
• /
• 제19권10호
• /
• pp.2617-2629
• /
• 1995

The flow through a centrifugal compressor rotor was calculated using the quasi-3-dimensional and fully 3-dimensional Navier-Stokes solution methods. The calculated results, obtained during the development of the computer codes for both methods are discussed. In the inviscid quasi 3-dimensional analysis, stream function formulation was used for the blade to blade (B-B) plane calculations, and the streamline curvature method was used for the meridional (H-S) plane calculations. In the viscous 3-dimensional flow analysis, a control volume method based on a general rotating curvilinear coordinate system was used to solve the time-averaged Navier-Stokes equations, and a standard k-.epsilon. model was used to obtain eddy viscosity. The quasi-3-dimensional analysis reasonably predicts the pressure distributions and requires much less computation time in the region where viscous effects are not strong; however, it fails to predict velocity field and loss mechanism through the impeller passage. The viscous 3-dimensional flow analysis shows reasonable pressure distributions and typical jet-wake flow field through the impeller passage. Secondary flow and total pressure distributions on cross-sectional planes explain the loss mechanisms through the impeller.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.107-118
• /
• 1995

Three-dimensional simulator for thermal oxidation process is developed. The simulator is consisted by two individual module, one is analytic-model module and the other is numerical-model module. The analytic-model which uses simple complementary-error function guarantees fast calculation in prediction of multi-dimensional oxidation process. The numerical-model which is based on boundary element method (BEM), has a good accuracy and suitable for various process conditions. The results of this study show that oxide growth is retarded at the corner of hole structure and enhanced at the corner of island structure. These effects are reson of different distribution of oxidant diffusion and mask stress. The utility of models and simulator developed in this study is demonstrated by using it to predict not only traditional shape of LOCOS but also process effects in small geometry.