• 한국지반환경공학회 논문집
• /
• 제11권11호
• /
• pp.5-18
• /
• 2010

본 연구에서는 지간 15m 이하의 지중파형강판 박스구조물의 3차원 해석 시 적용 가능한 3차원 보강판 모델을 제안하고 검증하였다. 3차원 보강판 모델은 실제 파형강판의 단면계수와 종방향과 길이방향의 단면특성을 고려하여 지중강판 박스구조물을 모델링함으로써, 3차원 해석 시 모델링을 간편하게 하고 해석시간을 단축할 수 있는 유용한 해석 모델이다. 이 모델을 검증하기 위해 3단계의 시공과정(정점부까지의 뒷채움, 토피고까지의 뒷채움, 활하중재하)에 따른 거동분석으로부터 최대 변위와 최대모멘트를 유발하는 재하상태를 도출하였고, 제안된 단면을 통해 파형강판의 거동을 분석하였다. 분석 결과를 3차원 등가판 모델, 2차원 모델, 실제파형강판 구조물과 동일하게 모델링한 3차원 Corrugated 판 모델과 비교 검증하였다. 해석결과 2차원 모델과 3차원 등가판 모델은 활하중 조건에서 3차원 Corrugated 판 모델과 큰 차이를 나타내었으나, 3차원 보강판 모델은 모든 해석 결과에서 3차원 Corrugated 판 모델과 일치하는 결과를 나타내었다.

• 대한의용생체공학회:의공학회지
• /
• 제5권1호
• /
• pp.19-24
• /
• 1984

In this study, the general characteristics, and theories of cochlear concerning with hearing are examined. Also the digital method is studied in order to analyze with microcomputer on the model equation of basiliar membrane in the cochlear derived from 3-dimensional rectangular block model which is studied by Boer. The method is illustrated for the amplitude characteristics of basiliar momtrane wave velocity. The results obtained are as follows; 1. In the magnitude characteristics, the velocity gradually increases from the stapes, shows the maximum magnitude, and then rapidly decreases to the Helicotrema. 2. The characteristics of 3-dimensional model is located between 1-and 2- dimensional models in the velocity characteristics coefficients, magnitude characteristics, and the pattern of 2-dimensional model shoves the different features from the 1-dimensional and 3-dimensional rectangular block model. 3. In the 3-dimensional rectangular block model, the characteristics of the waveform and the maximum resonant point are same whether Z(X) is linear or nonlinear.

• Journal of Computational Design and Engineering
• /
• 제1권2호
• /
• pp.96-102
• /
• 2014

In the field of design and manufacturing, there are many problems with managing dynamic states of three-dimensional (3D) objects. In order to solve these problems, the four-dimensional (4D) mesh model and its modeling system have been proposed. The 4D mesh model is defined as a 4D object model that is bounded by tetrahedral cells, and can represent spatio-temporal changes of a 3D object continuously. The 4D mesh model helps to solve dynamic problems of 3D models as geometric problems. However, the construction of the 4D mesh model is limited on the time-series 3D voxel data based method. This method is memory-hogging and requires much computing time. In this research, we propose a new method of constructing the 4D mesh model that derives from the 3D mesh model with continuous rigid body movement. This method is realized by making a swept shape of a 3D mesh model in the fourth dimension and its tetrahedralization. Here, the rigid body movement is a screwed movement, which is a combination of translational and rotational movement.

• 한국지리정보학회지
• /
• 제7권4호
• /
• pp.119-132
• /
• 2004

지리 객체는 3차원 공간으로 구성되기 때문에 정확한 표현을 위하여 3차원 좌표계를 사용하여야 한다. 이 논문에서는 3차원+temporal 객체 모델을 정의하기 위해 2차원 공간으로 제한되어 있는 개방형 지리 데이터 모델을 3차원 공간과 유효 시간으로 확장하였다. 이러한 모델 설계 방법은 개방형 모델을 사용하는 타 시스템과의 호환성을 보장한다. 또한 이력 객체와 이동 객체를 함께 고려하여 두 종류의 시공간 객체에 대한 관리를 가능하게 하였다. 여기에서 제안된 3차원+temporal 객체 모델은 OLE/COM 기법을 사용한 3차원+temporal 객체 컴포넌트로 구현하였다. 이를 위해 제안한 객체 모델을 기반으로 컴포넌트의 인터페이스 구조를 정의하였다. 이 컴포넌트의 사용 예를 보이기 위해 3차원 시공간 데이터를 대상으로 하는 데이터 소비자를 구현하였다. 이와같은 컴포넌트는 기존의 시스템에 제안된 모델을 적용하기 위한 비용과 노력을 최소화하는 해결책으로 사용될 수 있다.

• Imaging Science in Dentistry
• /
• 제34권1호
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.

• 환경영향평가
• /
• 제11권2호
• /
• pp.109-116
• /
• 2002

The diagnostic and prognostic methods for generating 3 dimensional wind field were comparatively analyzed and 4 dimensional data assimilation (FDDA) technique by incorporating Automatic Weather System (AWS) into the prognostic methods was discussed for the urban scale air quality model. The A WS covered the urban scale grid distance of 10.6 km and 4.3 km in South Korea and Kyong-in region, respectively. This is representing that AWS for FDDA could be fairly well accommodated in prognostic model with the meso${\gamma}$~ microa scale (~5 km), indicating that the 3 dimensional wind field by FDDA technique could be a useful interpretative tool in urban area for the atmospheric environmental impact assessment.

• 전자공학회논문지S
• /
• 제35S권7호
• /
• pp.37-45
• /
• 1998

In this paper, we extracted heart region using dyamic contour model, increased the vertical resolution of heart region by proposed 2-dimensional interpolation method and visualized the 3-dimensional hearet volutme. the proposed new energy term of dynamic contour model considering the gray level and direction of controur vectors is effective to extract the closed heart boundary. And, we generatedvertical slice images from the extracted heart region images using the 2-dimensional linear interpolation by DT(distance transform). We showed that proposed algorithm is useful by 3-dimensional visualization of heart volume.

• 한국해안해양공학회지
• /
• 제7권2호
• /
• pp.176-197
• /
• 1995

한국경남해역의 2차원 및 3차원적 조류구조를 동적원리에 근거한 수치모형을 통하여 조사하였다. 2차원 수치모형을 이용하여 주 8개 분조(M$_2$, S$_2$, $K_1$, $O_1$, $N_2$, $K_2$, P$_1$, Q$_1$)에 대한 조석체계를 계산하였다. 계산결과는 해안의 관측치와 비교하여 만족할만한 일치를 보였다. 이러한 결과를 토대로 하여 매년 적조등으로 인해 심각한 오염이 발생되고 있는 진해만과 마산만의 3차원적 조석순환구조를 조사하기 위하여 기 수립된 2차원 모형과 내만의 3차원 모형을 연결시키도록 개선하였다. 그 방법으로 Davies(1980)가 제시한 2차원 수심적분 모형과 3차원 Galerkin-Spectral 모형과의 동적연결방법을 이용하였다. Davies의 연구에 추가하여 본 연구에서는 3차원 수치모형에 자승형마찰항과 비선형 이류항을 추가하였다. 3차원 모형에서 산정된 각 수심별 M$_2$ 분조의 조류타원도는 KORDI(1990)가 수행한 수심별 조류관측치와 양호한 일치를 보였다.

• Wind and Structures
• /
• 제25권6호
• /
• pp.537-549
• /
• 2017

In this study, the turbulent flow around a bluff body for different wind velocities was investigated numerically by using its two- and three-dimensional models. These models were tested to verify the validity of the simulation by being compared with experimental results which were taken from the literature. Variations of non-dimensional velocities in different positions according to the bluff body height were analysed and illustrated graphically. When the velocity distributions were examined, it was seen that the results of both two- and three-dimensional models agree with the experimental data. It was also seen that the velocities obtained from two-dimensional model matched up with the experimental data from the ground to the top of the bluff body. Particularly, compared to the front part of the bluff body, results of the upper and back part of the bluff body are better. Moreover, after comparing the results from calculations by using different models with experimental data, the effect of multidimensional models on the obtained results have been analysed for different inlet velocities. The calculation results from the two-dimensional (2D) model are in satisfactory agreement with the calculation results of the three-dimensional model (3D) for various flow situations when comparing with the experimental data from the literature even though the 3D model gives better solutions.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.1044-1051
• /
• 1989

본 연구에서는 Wu가 제시한 수학적 모델에 기초를 둔 비점성 준3차원 유동해 석에 실제 유체의 점성효과 및 2차유동 등에 의해 발생하는 손실들을 손실모델로 반영하여 그 타당성 유무를 검토하는 데 목적을 두었다.