• Journal of the Korean GEO-environmental Society
• /
• v.11 no.11
• /
• pp.5-18
• /
• 2010

In this paper, a 3-dimensional stiffened plate model for soil-metal box structures is proposed. 3-dimensional stiffened plate model is enable to model corrugated steel plates of soil metal box culverts considering section modulus and section properties of longitudinal and horizontal direction from a corrugated steel plate. Loading conditions which causes maximum displacement and maximum moment according to the step construction stages(a back filling to the top of the plate, a back filling to the maximum depth of cover, and loading of live loads) was applied and the behaviors of the soil metal box culverts was analyzed. Analysis results of 3-dimensional stiffened model were compared with those of 2-dimensional model, 3-dimensional equivalent plate model and 3-dimensional corrugated plate model. As results, the behaviors of 2-dimensional model and 3 dimensional equivalent model are different from 3-dimensional corrugated plate model but the result of 3-dimensional stiffened model has good agreement with that of 3-dimensional corrugated plate model.

• Journal of Biomedical Engineering Research
• /
• v.5 no.1
• /
• pp.19-24
• /
• 1984

In this study, the general characteristics, and theories of cochlear concerning with hearing are examined. Also the digital method is studied in order to analyze with microcomputer on the model equation of basiliar membrane in the cochlear derived from 3-dimensional rectangular block model which is studied by Boer. The method is illustrated for the amplitude characteristics of basiliar momtrane wave velocity. The results obtained are as follows; 1. In the magnitude characteristics, the velocity gradually increases from the stapes, shows the maximum magnitude, and then rapidly decreases to the Helicotrema. 2. The characteristics of 3-dimensional model is located between 1-and 2- dimensional models in the velocity characteristics coefficients, magnitude characteristics, and the pattern of 2-dimensional model shoves the different features from the 1-dimensional and 3-dimensional rectangular block model. 3. In the 3-dimensional rectangular block model, the characteristics of the waveform and the maximum resonant point are same whether Z(X) is linear or nonlinear.

• Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.96-102
• /
• 2014

In the field of design and manufacturing, there are many problems with managing dynamic states of three-dimensional (3D) objects. In order to solve these problems, the four-dimensional (4D) mesh model and its modeling system have been proposed. The 4D mesh model is defined as a 4D object model that is bounded by tetrahedral cells, and can represent spatio-temporal changes of a 3D object continuously. The 4D mesh model helps to solve dynamic problems of 3D models as geometric problems. However, the construction of the 4D mesh model is limited on the time-series 3D voxel data based method. This method is memory-hogging and requires much computing time. In this research, we propose a new method of constructing the 4D mesh model that derives from the 3D mesh model with continuous rigid body movement. This method is realized by making a swept shape of a 3D mesh model in the fourth dimension and its tetrahedralization. Here, the rigid body movement is a screwed movement, which is a combination of translational and rotational movement.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.119-132
• /
• 2004

As geographic object is consisted of 3-dimensional, it must be appropriated use the 3-dimensional coordinate system to express for exact representation. To define 3-dimensional+temporal object model we extended 3-dimensional space and valid time from object model of OpenGIS consortium that is limited to 2-dimensional space. This methodology guarantees compatibility with other systems to construct with the open model. Also, it permitted administration for two kinds of object by considering both objects whose position and shape changes discretely over time and objects whose position changes continuously. 3-dimensional+temporal object model was implemented by 3-dimensional+temporal object component using OLE/COM techniques. The interfaces of the component defined based on 3-dimensional+temporal object model. To use this component, we implement the data consumer for 3-dimensional+temporal data.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.

• Journal of Environmental Impact Assessment
• /
• v.11 no.2
• /
• pp.109-116
• /
• 2002

The diagnostic and prognostic methods for generating 3 dimensional wind field were comparatively analyzed and 4 dimensional data assimilation (FDDA) technique by incorporating Automatic Weather System (AWS) into the prognostic methods was discussed for the urban scale air quality model. The A WS covered the urban scale grid distance of 10.6 km and 4.3 km in South Korea and Kyong-in region, respectively. This is representing that AWS for FDDA could be fairly well accommodated in prognostic model with the meso${\gamma}$~ microa scale (~5 km), indicating that the 3 dimensional wind field by FDDA technique could be a useful interpretative tool in urban area for the atmospheric environmental impact assessment.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.37-45
• /
• 1998

In this paper, we extracted heart region using dyamic contour model, increased the vertical resolution of heart region by proposed 2-dimensional interpolation method and visualized the 3-dimensional hearet volutme. the proposed new energy term of dynamic contour model considering the gray level and direction of controur vectors is effective to extract the closed heart boundary. And, we generatedvertical slice images from the extracted heart region images using the 2-dimensional linear interpolation by DT(distance transform). We showed that proposed algorithm is useful by 3-dimensional visualization of heart volume.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.2
• /
• pp.176-197
• /
• 1995

Two-dimensional and three-dimensional structures of tidal currents on southeastern waters of Korea off Kyungnam coast were investigated via a series of numerical models based on dynamic principles. With a two-dimensional tidal model, tidal regimes of major eight tidal constituents (M$_2$, S$_2$, K$_1$, O$_1$, N$_2$, K$_2$, P$_1$, Q$_1$) were computed. Model results showed that the computed results were in good agreement with coastal observations. On the basis of these results the model was further improved to compute three-dimensional structure of tidal current in inner Jinhai and Masan Bay regions of the model area where severe pollutions occur due to red tide by combination of the previous two-dimensional model and inner three-dimensional model. For this work, three-dimensional Galerkin-Spectral model and two-dimensional depth-integrated model are dynamically combined by the method presented by Davies (1980). In addition to the previous work by Davies, the advective term and quadratic bottom friction term are included in present Three-dimensional numerical model. The computed results of M$_2$ tidal current ellipses with respect to depth showed general agreements with those of current observations by KORDI (1990).

• Wind and Structures
• /
• v.25 no.6
• /
• pp.537-549
• /
• 2017

In this study, the turbulent flow around a bluff body for different wind velocities was investigated numerically by using its two- and three-dimensional models. These models were tested to verify the validity of the simulation by being compared with experimental results which were taken from the literature. Variations of non-dimensional velocities in different positions according to the bluff body height were analysed and illustrated graphically. When the velocity distributions were examined, it was seen that the results of both two- and three-dimensional models agree with the experimental data. It was also seen that the velocities obtained from two-dimensional model matched up with the experimental data from the ground to the top of the bluff body. Particularly, compared to the front part of the bluff body, results of the upper and back part of the bluff body are better. Moreover, after comparing the results from calculations by using different models with experimental data, the effect of multidimensional models on the obtained results have been analysed for different inlet velocities. The calculation results from the two-dimensional (2D) model are in satisfactory agreement with the calculation results of the three-dimensional model (3D) for various flow situations when comparing with the experimental data from the literature even though the 3D model gives better solutions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1044-1051
• /
• 1989

A numerical calculation is carried out for the analysis of 3-dimensional compressible flow field in axial-flow rotating blades by using finite element method. The calculation of flow in impellers plays a dominant role in the theoretical research and design of turbomachines. Three-dimensional flow fields can be obtained by the quasi-three-dimensional iterative calculation of the flows both on blade-to-blade stream surfaces and hub-to-shroud stream surfaces with the introduction of viscous loss model in order to consider a loss due to viscosity of fluid. In devising the loss model, four primary sources of losses were identified: (1) blade profile loss (2) end wall loss (3) secondary flow loss (4) tip-leakage loss. For the consideration of an axially parabolic distribution of loss, the results of present calcullation are well agreed with the results by experiment, thus the introduction of loss model is proved to be valid.