• Title/Summary/Keyword: 3-dimensional figure

Search Result 113, Processing Time 0.033 seconds

On the dimensional stabilization of woods with treatment of Polyethylene Glycol-400 (폴리에치렌 글리콜-400에 의한 목재(木材)의 칫수안정화(安定化))

  • Cho, Nam-Seok;Jo, Jea-Myeong;Bae, Kyu-Yong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.3 no.1
    • /
    • pp.3-15
    • /
    • 1975
  • How to stabilize wood against shrinking and swelling in variable atmospheric moisture conditions is important to the wood-using industry and a challenge to research. Polyethylene glycol stabilize wood by bulking the fiber. PEG also serve as a chemical seasoning agent, suppress decay in high concentrations, and have slight effect on physical properties, gluing or finishing. The study designed to determine the effect of PEG-400 on the dimensional stabilization of local hardwoods for wood carvings that could supply a greatly expanding tourist trade and making curved furniture parts, lamp stands and other decorative objects, and possible gunstock. The species examined were 6 species, Seo-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acer mono), Karae-Namoo (Juglans mandshurica), Jolcham-Namoo (Quercusserrata) and Sanbud-Namoo (Prunus sargentii), used as block of 5cm thick radially to the grain, 7cm wide tangentially, and 70cm long parallel to the wood grain. All these test piecies were conditioned above the fiber saturation point before impregnation. The stabilization effects were determined for PEG-400 treated woods in a 50 percent solution for 20 days. The following conclusions were obtained. PEG retentions increased with treating time. It was more effective to treat at 60$^{\circ}C$ than at room temperature. In degree of PEG-400 impregnation on species, Cheungcheung-Namoo havinglow specific gravity had the highest retentions, 68.77% but the lowest, 56.33% was shown in Jolcham-Namoo with high specific gravity. Specific gravity of treated wood increased considerably with effectiveness of polymer loading. The increases in specific gravity were 5.36 to 13.16 percent. The highest was Jolcham-Namoo, the lowest Karae-Namoo. On the dimensional stability, a 40 percent of effectiveness of polymer loading was just as effective as 60 percent in reduction in water absorptivity (RWA), antishrinkage efficiency (ASE) and antiswelling efficiency (AE), and from over 60 percent they increased more rapidly. Also species response varied considerably. ASE was 30.12 to 69.97 percent tangentially and 27.86 to 56.37 percent radially, AE 34.06 to 73.76 percent tangentially and 30.11 to 70.12 percent radially, and RWA 42.31 to 65.32 percent. No differences in volume swelling among the 6 species were observed. Its values were ranged from 14.98 to 19.55 percent and also increased with PEG retentions. On the mechanical properties, the strengths very much decreased with PEG-400 loadings as shown in Figure 12; that were 11.41 to 22.90 percent in compression, 21.61 to 34.35 percent in bending and 22.83 to 36.83 percent in tensile strength. PEG retention in cell wall was less than 1 percent and the most of PEG were immersed in cell lumen. Except for Korae-Namoo, effectivenesses of polymer loading were as much high as 61.58 to 75.02 percent. This is believed to be due to the effect of PEG-400 on excellant dimensional stability of treated woods.

  • PDF

NEAR-INFRARED STUDIES ON STRUCTURE-PROPERTIES RELATIONSHIP IN HIGH DENSITY AND LOW DENSITY POLYETHYLENE

  • Sato, Harumi;Simoyama, Masahiko;Kamiya, Taeko;Amari, Trou;Sasic, Slobodan;Ninomiya, Toshio;Siesler, Heinz-W.;Ozaki, Yukihiro
    • Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
    • /
    • 2001.06a
    • /
    • pp.1281-1281
    • /
    • 2001
  • Near-infrared (NIR) spectra have bean measured for high-density (HDPE), linear low-density (LLDPE), and low-density (LDPE) polyethylene in pellet or thin films. The obtained spectra have been analyzed by conventional spectroscopic analysis methods and chemometrics. By using the second derivative, principal component analysis (PCA), and two-dimensional (2D) correlation analysis, we could separate many overlapped bands in the NIR. It was found that the intensities of some bands are sensitive to density and crystallinity of PE. This may be the first time that such bands in the NIR region have ever been discussed. Correlations of such marker bands among the NIR spectra have also been investigated. This sort of investigation is very important not only for further understanding of vibration spectra of various of PE but also for quality control of PE by vibrational spectroscopy. Figure 1 (a) and (b) shows a NIR reflectance spectrum of one of the LLDPE samples and that of PE, respectively. Figure 2 shows a PC weight loadings plot of factor 1 for a score plot of PCA for the 16 kinds of LLDPE and PE based upon their 51 NIR spectra in the 1100-1900 nm region. The PC loadings plot separates the bands due to the $CH_3$ groups and those arising form the $CH_2$ groups, allowing one to make band assignments. The 2D correlation analysis is also powerful in band enhancement, and the band assignments based upon PCA are in good agreement with those by the 2D correlation analysis.(Figure omitted). We have made a calibration model, which predicts the density of LLDPE by use of partial least square (PLS) regression. From the loadings plot of regression coefficients for the model , we suggest that the band at 1542, 1728, and 1764 nm very sensitive to the changes in density and crystalinity.

  • PDF

The Effects of 'Solar System and Star' Using Storytelling Skill on Science Learning Motivation and Space Perception Ability (스토리텔링 기법을 적용한 '태양계와 별' 수업이 과학학습동기와 공간지각능력에 미치는 효과)

  • Lee, Seok-Hee;Lee, Yong-Seob
    • Journal of the Korean Society of Earth Science Education
    • /
    • v.5 no.1
    • /
    • pp.105-113
    • /
    • 2012
  • The purpose of this study was to examine the effects of storytelling skill on science learning motivation and space perception ability. For this study the 5 grade, 2 class was divided into a research group and a comparative group. The class was pre-tested in order to ensure the same standard. The research group had the science class with storytelling skill, and the comparative group had the class with teacher centered lectures for 10 classes in 10 weeks. The storytelling skill was focused on finding stories, constellation searching, story deciding, story hero deciding, story composition, storytelling completion. To prove the effects of this study, science learning motivation was split up according to attention power, relation, confidence, and sense of satisfaction. Also, space perception ability consisted of two-dimensional rotation, 3 dimension rotations, reflection, three-dimensional searching, number of block, and figure type in pattern. The results of this study are as follows. First, using storytelling skill was effective in science learning motivation. Second, using storytelling skill was effective in space perception ability. Also, after using storytelling skill was good reaction by students. As a result, the elementary science class with storytelling skill had the effects of developing science learning motivation and space perception ability. it means the science class with storytelling skill has potential possibilities and value to develop science learning motivation and space perception ability.

A STUDY ON THE MORPHOLOGY OF MANDIBULAR CONDYLE (MRI를 이용한 한국인 하악과두의 형태에 관한 연구)

  • Lee, Doo-Hee;Oh, Soon-Ho;Suh, Chang-Ho;Kim, Joon-Bae
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.27 no.5
    • /
    • pp.423-427
    • /
    • 2001
  • Objective: This study was prepared to figure out a certain dimension and morphology of the condyle at the central, medial and lateral aspects on MR images of asymptomatic volunteers, which could be comparable with those of the TMD patients' condyle. Materials: Sixty TMJs from 30 asymptomatic volunteers(15 male, 15 female) who had no clinical symptoms and no disc displacement on sagital and coronal view of MRI were served as normal. Method: MR images were taken from the asymptomatic volunteers and the dimension of the anteroposterior length, mediolateral width, height, convexities were measured through the images on the sagittal and coronal sections of mandibular condyle. Then, these data were collected and analyzed. Result: The mean value of anteroposterior length was $8.00{\pm}1.21mm$ at central section and mediolateral length was $21.40{\pm}2.32mm$ on coronal view. The anterior condylar length at medial side was the shortest and the convexity of anterior slop at the lateral side was proved to be the flattest among 3 sections. There were little dimensional and morphological differences at sagittal sections, but the mediolateral width of condyle at coronal section was significantly different between male and female. Conclusion: In sagittal sections, the anterior condyle length was shortest at medial side and the convexity of anterior slop was flattest at lateral side, and there were little dimensional and morphologic differences between male and female. In coronal section, male's condyle was more wider and flatter than female's.

  • PDF

A STUDY ON THE STRESS DISTRIBUTION OF THE ALL CERAMIC CROWNS ACCORDING TO THE CUSP ANGLE OF THE MAXILLARY FIRST PREMOLAR USING THREE DIMENSIONAL FINITE ELEMENT METHOD (상악 제1소구치의 교두각에 따른 전부도재관의 응력분포에 관한 삼차원유한요소법적 연구)

  • Kim Won-Kyu;Shin Dong-Kuk;Song Kie-Bum;Dong Jin-Keun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.42 no.1
    • /
    • pp.58-72
    • /
    • 2004
  • Statement of problem : Clinically, maxillary first premolar has a high risk of fracture. This is thought to be caused by the susceptible figure which the maxillary first premolar has In other words, sharp cusp angles of the premolar is thought to influence this situation. Purpose : This study was to know stress distribution of all-ceramic crown according to the cusp angle. Material and Method : It was manufactured a three dimensional finite element model simplified maxillary first premolar, and then analyzed stress distribution when cusp angle was each $80^{\circ}$, $90^{\circ}$, $100^{\circ}$, $110^{\circ}$ and $120^{\circ}$. Results and conclusion : 1. The von Misses stress showed that stress decreases as cusp angle increases in the central groove of the occlusal surface. 2. It showed that maximum principal stress was centered at the region of the central groove of the occlusal surface and a region which the force was inflicted. And also it appeared high on the lingual and buccal side of finish line. 3. The X axis of normal stress was focused in the central groove of the occlusal surface. The Y axis normal stress appeared high in the central groove of the occlusal surface, buccal and lingual side. 4. The Stress near the finish line showed a low value compared with stress in the region of the central groove of the occlusal surface. 5. It shows that the most dangerous angle for tooth fracture was on $80^{\circ}$ of the cusp angle and low on $120^{\circ}$ of its.

Enhancement in the Performance of Capacitive Sensor for Oily Water Separator (유수분리기용 정전용량형 센서의 성능향상에 관한 연구)

  • Che, Woo-Seong;Kim, Kyong-Woo;Kwon, Hyu-Sang
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.10 no.10
    • /
    • pp.1835-1841
    • /
    • 2006
  • Demand of enhanced bilge separation sensor system has been recently increased due to the severe regulation reinforcement of MEPC(Marine Environment Production Committee). Up to date bilge separation sensor has to be extremely accurate and highly reliable. To design and build such a bilge separator. a precise oily water separation level sensor that distinguishes oil from water is critical. Three dimensional simulations have been carried out to figure out the characteristics of capacitive level sensors, which grounds the finding of the parameters required to design the sensors. The parasitic capacitance problem which is inherent to capacitive level sensors has been taken care of. This paper concludes with the future research direction that can be pursued with the newly defined parameters of the capacitive level sensors.

Control of Flow Around an Airfoil Using Piezo-Ceramic Actuators (압전세라믹 액추에이터를 이용한 익형 후류 제어)

  • Choi, Jin;Jeon, Woo-Pyung;Choi, Hae-Cheon
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.24 no.8
    • /
    • pp.1112-1118
    • /
    • 2000
  • The objective of this study is to increase lift and decrease drag of an airfoil at high angles of attack by delaying flow separation with piezo-ceramic actuators. The airfoil used is NACA 0012 and its chord length is 0.3m. An experiment is performed at the freestream velocity of 15m/s at which the Reynolds number based on the chord length is $2{\times}10^5$. Seven rectangular actuators are attached to the airfoil surface and move up and down based on the electric signal. Drag and lift are measured using an in-house two-dimensional force-balance and the surface pressures are also measured. At the attack angle of $16^{\circ}$, the separation point is delayed downstream due to momentum addition induced by the movement of the actuators. Lift is increased by 10%, drag is reduced by 37%, and the efficiency is increased up to 170%. The flow fields with and without control are visualized using the smoke-wire and tuft techniques.

Representing variables in the latent space (분석변수들의 잠재공간 표현)

  • Huh, Myung-Hoe
    • The Korean Journal of Applied Statistics
    • /
    • v.30 no.4
    • /
    • pp.555-566
    • /
    • 2017
  • For multivariate datasets with large number of variables, classical dimensional reduction methods such as principal component analysis may not be effective for data visualization. The underlying reason is that the dimensionality of the space of variables is often larger than two or three, while the visualization to the human eye is most effective with two or three dimensions. This paper proposes a working procedure which first partitions the variables into several "latent" clusters, explores individual data subsets, and finally integrates findings. We use R pakacage "ClustOfVar" for partitioning variables around latent dimensions and the principal component biplot method to visualize within-cluster patterns. Additionally, we use the technique for embedding supplementary variables to figure out the relationships between within-cluster variables and outside variables.

Applied Implementation of J2ME 3D Mobile Based on WTK Development Environment (WTK 개발 환경 기반에서의 J2ME 3차원 모바일 응용구현)

  • Joo, Heon-Sik;Lee, Song-Won;Hong, Sung-Soo
    • Journal of the Korea Society of Computer and Information
    • /
    • v.13 no.6
    • /
    • pp.253-261
    • /
    • 2008
  • Mobile games will be one of independent industries on game areas and take the fourth standing in the important platform since PC Games, TV Games, and Palm Games. There are several reasons why mobile games will differ in their platform, behaviors, and habits. According to the data of market consultation about the figure of mobile-game players throughout the world, the Mobile game will increase steadily from 780 million in 2007 to 1860 million in 2010. Also, market income will mount up from $42,100 million to $87,000 million. 3D games have been playing important roles in our lives. Satisfying users' needs in high-quality games, they have been growing and attracting more people with their powerful visual effects and the three-dimensional design player. We cannot emphasize their tremendous visual impacts and animation effects too much. This paper displays how to design 3D application based on J2ME (Java 2 Micro Edition) and shows free movement of 3D objects receiving and responding to the keyboard of mobile devices withWTK (Wireless ToolKit) simulator on the 3D screen.

  • PDF

Public Sentiment Analysis of Korean Top-10 Companies: Big Data Approach Using Multi-categorical Sentiment Lexicon (국내 주요 10대 기업에 대한 국민 감성 분석: 다범주 감성사전을 활용한 빅 데이터 접근법)

  • Kim, Seo In;Kim, Dong Sung;Kim, Jong Woo
    • Journal of Intelligence and Information Systems
    • /
    • v.22 no.3
    • /
    • pp.45-69
    • /
    • 2016
  • Recently, sentiment analysis using open Internet data is actively performed for various purposes. As online Internet communication channels become popular, companies try to capture public sentiment of them from online open information sources. This research is conducted for the purpose of analyzing pulbic sentiment of Korean Top-10 companies using a multi-categorical sentiment lexicon. Whereas existing researches related to public sentiment measurement based on big data approach classify sentiment into dimensions, this research classifies public sentiment into multiple categories. Dimensional sentiment structure has been commonly applied in sentiment analysis of various applications, because it is academically proven, and has a clear advantage of capturing degree of sentiment and interrelation of each dimension. However, the dimensional structure is not effective when measuring public sentiment because human sentiment is too complex to be divided into few dimensions. In addition, special training is needed for ordinary people to express their feeling into dimensional structure. People do not divide their sentiment into dimensions, nor do they need psychological training when they feel. People would not express their feeling in the way of dimensional structure like positive/negative or active/passive; rather they express theirs in the way of categorical sentiment like sadness, rage, happiness and so on. That is, categorial approach of sentiment analysis is more natural than dimensional approach. Accordingly, this research suggests multi-categorical sentiment structure as an alternative way to measure social sentiment from the point of the public. Multi-categorical sentiment structure classifies sentiments following the way that ordinary people do although there are possibility to contain some subjectiveness. In this research, nine categories: 'Sadness', 'Anger', 'Happiness', 'Disgust', 'Surprise', 'Fear', 'Interest', 'Boredom' and 'Pain' are used as multi-categorical sentiment structure. To capture public sentiment of Korean Top-10 companies, Internet news data of the companies are collected over the past 25 months from a representative Korean portal site. Based on the sentiment words extracted from previous researches, we have created a sentiment lexicon, and analyzed the frequency of the words coming up within the news data. The frequency of each sentiment category was calculated as a ratio out of the total sentiment words to make ranks of distributions. Sentiment comparison among top-4 companies, which are 'Samsung', 'Hyundai', 'SK', and 'LG', were separately visualized. As a next step, the research tested hypothesis to prove the usefulness of the multi-categorical sentiment lexicon. It tested how effective categorial sentiment can be used as relative comparison index in cross sectional and time series analysis. To test the effectiveness of the sentiment lexicon as cross sectional comparison index, pair-wise t-test and Duncan test were conducted. Two pairs of companies, 'Samsung' and 'Hanjin', 'SK' and 'Hanjin' were chosen to compare whether each categorical sentiment is significantly different in pair-wise t-test. Since category 'Sadness' has the largest vocabularies, it is chosen to figure out whether the subgroups of the companies are significantly different in Duncan test. It is proved that five sentiment categories of Samsung and Hanjin and four sentiment categories of SK and Hanjin are different significantly. In category 'Sadness', it has been figured out that there were six subgroups that are significantly different. To test the effectiveness of the sentiment lexicon as time series comparison index, 'nut rage' incident of Hanjin is selected as an example case. Term frequency of sentiment words of the month when the incident happened and term frequency of the one month before the event are compared. Sentiment categories was redivided into positive/negative sentiment, and it is tried to figure out whether the event actually has some negative impact on public sentiment of the company. The difference in each category was visualized, moreover the variation of word list of sentiment 'Rage' was shown to be more concrete. As a result, there was huge before-and-after difference of sentiment that ordinary people feel to the company. Both hypotheses have turned out to be statistically significant, and therefore sentiment analysis in business area using multi-categorical sentiment lexicons has persuasive power. This research implies that categorical sentiment analysis can be used as an alternative method to supplement dimensional sentiment analysis when figuring out public sentiment in business environment.