• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.33-37
• /
• 2024

Recently, wearable virtual reality devices are widely used. These instruments include a 3-axis accelerometer. User's heart rate information in virtual reality contents can be useful for measuring user experience. In this paper, we propose a method to measure the heart rate through a 3-axis accelerometer based on the principle of ballistocardiography without additional sensors. The angular velocity was successively measured in a time series by the 3-axis accelerometer mounted to the head. The frequency of the maximum magnitude is determined as the heart rate through frequency transform and band pass filtering of the time series signal. For verification, the heart rate calculated from photoplethysmography sensors acquired at the same time was compared as ground-truth. In the virtual reality, the user's heart rate information can be extracted without additional heart rate sensor, and the emotional state and fatigue can be measured.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.129-141
• /
• 2010

In this paper, we present a wearable intelligent device based on multi-sensor for monitoring human activity. In order to recognize multiple activities, we developed activity recognition algorithms utilizing an image sensor and a 3-axis accelerometer sensor. We proposed a grid?based optical flow method and used a SVM classifier to analyze data acquired from multi-sensor. We used the direction and the magnitude of motion vectors extracted from the image sensor. We computed the correlation between axes and the magnitude of the FFT with data extracted from the 3-axis accelerometer sensor. In the experimental results, we showed that the accuracy of activity recognition based on the only image sensor, the only 3-axis accelerometer sensor, and the proposed multi-sensor method was 55.57%, 89.97%, and 89.97% respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.632-637
• /
• 2012

This paper introduces a simple and efficient calibration method for three-axis accelerometers and three-axis gyroscopes using three-axis motion rate table. Usually, the performance of low cost MEMS-based inertial sensors is affected by scale and bias errors significantly. The calibration of these errors is a bothersome problem, but the previous calibration methods cannot propose simple and efficient method to calibrate the errors of three-axis inertial sensors. This paper introduces a new simple and efficient method for the calibration of accelerometer and gyroscope. By using a three-axis motion rate table, this method can calibrate the accelerometer and gyroscope simultaneously and simply. Experimental results confirm the performance of the proposed method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.4
• /
• pp.53-58
• /
• 2009

In recently years, the research and application for sensor has increased in each field. In this paper, the system which can perceive and detect using 3-axis accelerometer sensor and serial communication is proposed. Also, the user has GUI environment for monitor in real-time. In order to reduce unstable data and error defect of electronic rechargeable liquid tilt sensor used digital 3-axis accelerometer sensor which has AD convertor. Therefore, this system provide exact data and a problem of objects for user more easier.

• The Journal of Korea Robotics Society
• /
• v.5 no.4
• /
• pp.279-285
• /
• 2010

This paper presents the use of 3 axis accelerometer for getting the gait information including the number of gaits, stride and walking distance. Travel distance is usually calculated from the double integration of the accelerometer output with respect to time; however, the accumulated errors due to the drift are inevitable. The orientation change of the accelerometer also causes error because the gravity is added to the measured acceleration. Unless three axis orientations are completely identified, the accelerometer alone does not provide correct acceleration for estimating the travel distance. We proposed a way of minimizing the error due to the change of the orientation. Pedestrian localization is implemented with the heading angle and the travel distance. Heading angle is estimated from the rate gyro and the magnetic compass measurements. The performance of the localization is presented with experimental data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.105-111
• /
• 2010

The purpose of this study was to detect early children with hyperactivity which is one of the symptoms of Attention Deficit-Hyperactivity Disorder (ADHD). This study used two methods: K-CBCL and observation of children's behavior. K-CBCL was done online by parents at home. For observation of children's behavior, the school asked children to wear a 3-axis accelerometer on their wrists. The data from K-CBCL and 3-axis accelerometer were analyzed and clustered to separate hypersensitive children from ordinary children. This experiment confirmed that 3-axis accelerometer which is one of Ubiquitous techniques and the K-CBCL questionnaire were helpful for detection of hypersensitive children.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.5
• /
• pp.361-367
• /
• 2004

This paper describes design of an algorithm for analyzing human activity using body-fixed 3-axis accelerometer in the small of the back. In the first step, we distinguish static and dynamic activity period using AC signal analysis. Then five postures were classified by applying the threshold in DC signal corresponding to the static activity period. Also, after comparison of average power and taking negative peak signal in the dynamic activity period, the four dynamic activities were classified by adaptive threshold method. To evaluate the performance of the proposed algorithm, the measured signals obtained from six subjects were applied to the proposed algorithm and the results were compared with the simultaneously measured video data. As a result, the activity classification rate of 95.7％ on average was obtained. Overall results show that the proposed classification algorithm has a possibility to be used to analyze the static and dynamic physical activity.

• Journal of Oriental Neuropsychiatry
• /
• v.31 no.4
• /
• pp.225-233
• /
• 2020

Objectives: This study aimed to reveal the gait characteristics of each Sasang constitution by examining the differences in gait analysis indicators using a 3-axis accelerometer. Methods: Ninety-one participants were classified through the TS-QSCD (Two-Step Questionnaire for Sasang Constitution Diagnosis) method and gait analysis was performed using a 3-Axis Accelerometer (G-WALK. BTS Bioengineering, Italy). Gait analysis in returning to the 6-meter turnaround point and 6-minute walking test were performed. The differences in the gait analysis index values were analyzed between each constitution. Results: The gait analysis of 91 subjects (37 Taeumin, 37 Soyangin, and 17 Soeumin), showed that the percent stride length/height in the Soyangin subjects was significantly higher than that of the Taeeumin and Soeuminin subjects in the spatiotemporal walking variables (p<0.05). Stride length also showed the widest tendency in the Soyangin subjects (p=0.05). In the kinesiological analysis, the range of pelvic obliquity angles in the Soeumin subjects was significantly wider than that of the Taeumin and Soyangin subjects (p<0.05). In the six-minute walking test, the Soyangin subjects walked the farthest at 309.41±35.23 m (p=0.064). Conclusions: In a comparison of the gait characteristics for each Sasang constitution using a three-dimensional accelerometer, the stride width of the Soyangin subjects was the widest compared to the Taeeumin, and Soeumin subjects, and Soyangin's walking speed showed a faster tendency than that of the Taeeumin and Soeumin subjects.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1043-1047
• /
• 2003

Most of the measurement and the evaluation of hand-transmitted vibration have been performed by using a small size single axis accelerometer between the handle and the hand palm or a three axis accelerometer attached on an adapter outside the hand(indirect measurement). It is most desirable for the correct evaluation of hand-transmitted vibration form the power tool handle to measure the acceleration between the handle surface and the hand palm in the three axis(direct measurement) as recommended in ISO 5349-1. In the study three axes acceleration measurement device was developed of which the thickness was less than 7mm so that it can be placed between the handle and the palm without any inconvenience during the measurement. To verify the performance of the developed device, measured acceleration by the two methods, direct and indirect, were compared in the study.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.396-398
• /
• 2009

Scoliosis is a three-dimensional deformity caused by lateral curvature of the spine. The existing braces used to correct the posture were some drawbacks such as inconvenience, tightness as well as unfitness to wear. In this study, we devised a posture guidance system in order to monitor a posture continuously and lead to pose correctly and a new method fur measuring a Cobb's angle value in third dimension based on two 3-axis accelerometers. As a result, the correlation coefficients between desired and measured angles were and standard error between desired and measured angles were 0.99, 1.32(x-axis), 0.99 and 1.10(y-axis), respectively. The devised system showed good potential for the optimal posture guide and an early detection of scoliosis.