• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.71-79
• /
• 2017

The purpose of this study was to identify the observable symptoms of musculoskeletal disease from electronic components manufacturing workers who involved in many repetitive tasks and to provide the basic data for the prevention and management. The survey was conducted on 721 people from 15 April, 2013 to 17 May, 2013 by self­recording type. The results of the study are as follows. First, symptom complaints based on different body parts are in following order, waist was 12.9%, shoulder was 10.5%, neck was 7.4%, hand/wrist/finger was 7.4%, leg/foot was 4.4%, arm/elbow was 2.8%, and 21.9% of the respondents showed symptoms in more than one body part. Sex, age, marital status, work experience, work intensity, and past accident experience were statistically significant. Second, in the job stress evaluation, all male and female workers were below the median of Korean workers in all of 8 categories. the higher the scores for lack of job autonomy, the higher the symptom complaints of musculoskeletal disease. In the case of patients complain observable symptoms of musculorskeletal disease, they should receive proper outpatient treatment, various programs such as stretching by body parts, setting up a desirable working posture, switching to cyclical work, should b developed as much as possible.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.58-64
• /
• 2000

Assuming that the performance of holographic storage media is ideal, we estimate the area storage density of disk-type holographic memories, when the method of either angle multiplexing, or rotational multiplexing, or both are used. The area storage density is strongly dependent on the f numbers (ratio of focal length to diameter) of both the Fourier transform lens in the signal arm, denoted by $F/#_2$, and the angle range over which the reference beam is incident (or, the equivalent f number corresponding to the angle range denoted by $F/#_1$). The area storage density is largely independent of the pixel pitch of the spatial light modulator when the Fourier plane holograms are recorded, while it is sensitive to the pixel pitch when the image plane holograms are recorded. In general, to obtain high area storage density, the Fourier or at least near Fourier plane holograms rather than the image plane holograms should be recorded. In addition, when the thickness of the recording materials are less than approximately $500\mu\extrm{m}$, rotational multiplexing gives higher area storage densities than angle multiplexing does. To increase the storage density further, however, it is desirable to use both of the two multiplexing methods in combination.nation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.405-416
• /
• 1992

This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.

• Nutrition Research and Practice
• /
• v.17 no.2
• /
• pp.241-256
• /
• 2023

BACKGROUND/OBJECTIVES: Diabetes-specific oral nutritional supplements (ONS) have anti-hyperglycemic effects, while D-allulose exerts anti-diabetic and anti-obesity effects. In this study, we investigated the efficacy and safety of diabetes-specific ONS, including allulose, on glycemic and weight changes in overweight or obese patients with type 2 diabetes mellitus (T2DM). SUBJECTS/METHODS: A single-arm, historical-control pilot clinical trial was conducted on 26 overweight or obese patients with T2DM (age range: 30-70 yrs). The participants were administered 2 packs of diabetes-specific ONS, including allulose (200 kcal/200 mL), every morning for 8 weeks. The glycemic profiles, obesity-related parameters, and lipid profiles were assessed to evaluate the efficacy of ONS. RESULTS: After 8 weeks, fasting blood glucose (FBG) level significantly decreased from 139.00 ± 29.66 mg/dL to 126.08 ± 32.00 mg/dL (P = 0.007) and glycosylated hemoglobin (HbA1c) improved (7.23 ± 0.82% vs. 7.03 ± 0.69%, P = 0.041). Moreover, the fasting insulin (δ: -1.81 ± 3.61 μU/mL, P = 0.017) and homeostasis model assessment for insulin resistance (HOMA-IR) (δ: -0.87 ± 1.57, P = 0.009) levels decreased at 8 weeks, and body weight significantly decreased from 67.20 ± 8.29 kg to 66.43 ± 8.12 kg (P = 0.008). Body mass index (BMI) also decreased in accordance with this (from 25.59 ± 1.82 kg/m² to 25.30 ± 1.86 kg/m², P = 0.009), as did waist circumference (δ: -1.31 ± 2.04 cm, P = 0.003). CONCLUSIONS: The consumption of diabetes-specific ONS with allulose in overweight or obese patients with T2DM improved glycemic profiles, such as FBG, HbA1c, and HOMA-IR, and reduced body weight and BMI.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.667-673
• /
• 2021

As we enter the era of the 4th industrial revolution, it is judged that the scope of work of radiologists will be further expanded according to the innovation and advancement of radiation medical technology development. In this study, the current status of medical equipment and radiology technicians was identified, and basic data were provided for the plan for nurturing talents in the field of radiation medical technology in the era of the 4th industrial revolution, as well as career and employment counseling. Data from the second quarter of 2020 and the second quarter of 2021 were analyzed using health and medical big data. As a result of comparing the status of medical equipment by type in 2021 compared to 2020, C-Arm X-ray examination equipment increased by 5.83% to 6,638 units, followed by MRI examination equipment 1,811 units 5.29%, and angiography equipment 725 units 5.22% , general X-ray examination equipment 21,557 units increased 3.99%, CT examination equipment 2,136 units 3.03%, and breast examination equipment 3,425 units increased 3.00%. As a result of a comparison of the total number of radiologists in 2021 compared to 2020, the number was 29,038, an increase of 2.73%. As a result of comparing the status of radiographers by region, the increase was highest in the Gyeonggi region with 5.96%, followed by the Gangwon region with a 5.66% increase and the Chungnam region with a 3.81% increase. In a situation where the number of medical equipment and radiologist manpower is increasing, universities are developing specialized knowledge and practical competency through subject development related to the understanding and utilization of customized artificial intelligence and big data that can be applied in the medical radiation technology field in the era of the 4th industrial revolution. It is necessary to nurture qualified radiographers, and at the level of the association, it is thought that active policies are needed to create new jobs and improve employment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.6
• /
• pp.845-856
• /
• 2014

This study focused on the production and usability evaluation of smart outdoor jackets that are designed to provide convenience to middle-aged people by embedding devices for lighting and location tracing. The results were as follows. 1. Jacket power supplier was a assembled system composed of battery, charger, controller and switch. A solar cell was attached on the upper arm, and a wire type EL on the center line of a raglan sleeve along with a GPS on the left sleeve with a transparent vinyl pocket. The total weight of the jacket embedded with devices was 385-520g. 2. Operation of function, activity, acceptability, safety, convenience for device use, appearance, practical maintenance were selected based on an analysis of evaluation criteria of previous smart wear research. Criteria were narrowed to three major categories of satisfaction, appearance and maintenance. 3. Use satisfaction criterion consisted of wearable device functionality and physical, psychological use convenience. The evaluation indicated actual functionality. EL functions were especially effective and necessary. Convenience of use showed that a smart jacket was thought to be safe and the size was moderate regardless of age and gender. Outer appearance was satisfactory and respondents praised the color. The practical maintenance evaluation indicated that there was no challenge in doing the laundry since the solar battery and GPS were detachable. The practical use of smart outdoor jackets confirmed by fabric that was washable and dried quickly.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.646-656
• /
• 2015

This study investigates the conditions of Korean naval duty and combat uniforms to develop a new design. Survey participants consisted of, 723 Sailors ($25.3{\pm}6.9yr$ in age, $43{\pm}53$ months in work experience, $174{\pm}6cm$ in height, $71{\pm}9kg$ in body mass) serving in the Korean Navy for over 12 months. The questionnaire consisted of 72 questions about anthropometric characteristics, preferred design, textiles, wear mobility, and subjective perceptions. The results showed that the preferred colors for future naval duty uniforms were blue in summer (69%) and black in winter (62%). Digital camouflage pattern (60%) and darker colors on the inside of shirt collar (87%) and the edge of sleeves (84%) were preferred. They favored more than one pocket on the upper arm and chest of the shirts (58%), narrower width around pant legs and hems than the current clothing (63%), self-controlled elastic waist (55%) and no cargo type pocket on the pants (45%). There were requirements to alleviate excessive heat stress in summer and to protect from the cold and wind in winter. Wrinkle-free (85%), anti-bacterial (78%), water-proof (75%), oil-proof (90%), and elastic (67%) textiles were preferred for Korean navy uniforms. These results will be applied to develop the next generation Korean navy uniforms.

• Journal of Chest Surgery
• /
• v.9 no.2
• /
• pp.245-250
• /
• 1976

A 33 year-old man was admitted with chief complaints of severe sharp pain on left upper interscapular region and motor weakness of left arm for 9 days. He had a history of blunt trauma over left shoulder about 3 years ago. Physical examination showed a ping pong ball sized mass which was located at the left supraclavicular area and was firm, fixed, and nonpulsatile. No bruit or murmur was obtained over the mass. Ipsilaterally, radial, ulnar, and brachial pulse were very weak and ptosis and anhidrosis were noticed. Neurologic examination revealed moderate or severe weakness of flexion and extension of left elbow, wrist and fingers, and anesthesia of the skin in left C8-T1 dermatome and hypalgesia in left C6-C7 dermatome. Retrograde aortography demonstrated complete obstruction of left subclavian artery. An exploratory operation was performed through the left 4th intercostal space. It was found that the mass was a left subclavian aneurysm of traumatic false type. Proximal and distal ligation of the aneurysm were applied and the sac was partially removed. The continuity of the subclavain artery was established by the use of a 6mm. Dacron graft from the root of the subclavian to the axillary artery. Postoperatively the patient was improved from the circulatory and neurologic disturbances.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.219-224
• /
• 2001

Spectral phase interferometry for direct electric-field reconstruction (SPIDER) was fabricated and used to characterize pulses from a Ti:sapphire oscillator. In the SPIDER apparatus, two replicas of the input pulse were generated with a time delay of 200 fs and were upconverted by use of sum-frequency generation with a strongly chirped pulse using a 8-cm-long SFIO glass block at a 30-11m-thick type II BBO (p-BaBz04) crystal. The resulting interferogram was recorded with a UV-enhanced CCD array in the spectrometer. The spectral phase was retrieved by SPIDER algorithm in combination with independently measured pulse spectrum and the corresponding temporal intensity profile was reconstructed with a duration of 19 fs. As an independent cross-check of the accuracy of the method, we compared the interferometric autocorrelation (lAC) signal calculated from the SPIDER data with a separately measured lAC. The conventional, but unjustified, method of fitting a sechz pulse to the autocorrelation deceivingly yielded a pulse duration of 15 fs. This systematic underestimation of the pulse duration affirms the need for a complete characterization method. From the consideration in this paper, we concluded that the SPIDER could provide an accurate characterization of femtosecond pulses. ulses.

• Clinics in Shoulder and Elbow
• /
• v.20 no.2
• /
• pp.90-94
• /
• 2017

Background: Proximal humerus fracture is considered to be the third most common fracture for patients aged 65 years or older. Conservative treatment has been known to treat most of humerus fracture. However, fractures with severe displacement or dislocation may require surgical treatment. Intramedullary fibular allograft with a locking plate is frequently used in patients accompanying medial metaphyseal disruption. In this study, author intends to evaluate clinical and imaging results based on patients who underwent surgical treatment using fibular allograft with a locking plate. Methods: This study is conducted prospectively at Wonju Severance Christian Hospital, targeting patients who previously underwent surgical treatment using open reduction and intramedullary fibular allograft with a locking plate between 2011 and 2015. A total of 26 patients were evaluated on the following: postoperational clinical assessment measuring Constant score, American Shoulder and Elbow Society (ASES) score, and the Disabilities of the Arm, Shoulder and Hand (DASH) score. Postoperational imaging assessments are evaluated via measuring the neck-shaft angle. The study subject were Neer classification type 3, 4 proximal humerus fracture cases with disrupted medial hinge and having cortical comminution in the region of the surgical neck. Results: The average period of progression was 22.5 months, and the average age of patients was 72.6 years. At the final follow-up, the average Constant, average ASES, and average DASH scores were 80.1, 78.5, and 20.6 respectively. The average neck-shaft angle was $127.5^{\circ}$. Conclusions: In conclusion, fibular allograft augmentation with a locking plate showed satisfying results in both clinical and imaging studies.