• 제목/요약/키워드: 3-MC

검색결과 2,231건 처리시간 0.03초

경기도 경안천에서 소형 보(洑)의 철거 이후에 변화된 저서성 대형무척추동물 군집 (Changes of Benthic Macroinvertebrate Communities after a Small Dam Removal from the Gyeongan Stream in Gyeonggi-do, Korea)

  • 길혜경;김동건;정상우;신일권;조강현;우효섭;배연재
    • 환경생물
    • /
    • 제25권4호
    • /
    • pp.385-393
    • /
    • 2007
  • 본 조사에서는 경기도 경안천의 중류에 위치한 소형보를 철거한 이후에 변화된 저서성 대형무척추동물의 군집을 조사하였다. 조사는 보가 있었던 지점의 상류와 하류, 그리고 중류 (보의 자리)에서 보의 철거 후 4회 (2004년 11월, 2005년 5월, 2006년 1월, 그리고 2006년 5월)에 걸쳐 Surber sampler (50$\times$50 cm, 망목 0.25 mm)로 정량채집을 하였다. 조사의 결과, 조사지역에서는 총 4문 5강 11목 27과 35속 46종의 저서성 대형무척추동물이 출현하였으나, 조사시기별 출현종수는 지점당 3$\sim$17종으로 차이가 컸다. 상류지점은 보의 철거 1년 이후부터 점차 여울이 형성되고, 하상물질이 다양화 되는 등 서식환경이 바뀌자 종수가 점차 증가하였고, 분류군의 조성도 점차 다양하게 바뀌었다. 우점종은 대부분 오염에 내성이 강해 도시하천에 풍부한 깔따구류(Chironomidae sp.)와 실지렁이류(Tubificidae sp.)였고, 일부 지점에서 줄날도래(H. kozhantschikovi)가 제2우점종으로 나타났다. 보의 철거 약 1년후부터 우점도지수는 낮아지고, 종다양도지수는 높아지는 경향을 나타냈다. 상류 지점에 여울이 형성되면서 줄날도래류(Hydropsychidae spp.)가 증가하자 collector-filterers의 비율이 증가하였고, 납작하루살이류 (Heptageniidae spp.) 등의 clingers, 꼬마하루살이류 (Baetidae spp.)등의 swimmers의 비율 또한 상대적으로 증가하였다. 저서성 대형무척추동물에 의한 수환경 등급을 나타내는 군오염지수(GPI)와 수환경평가지수(ESB) 모두 보의 철거 이후 상류지점에서 수환경의 개선효과를 가져온 것으로 나타났다.

태양에너지를 이용한 유용목재의 건조 (Seasoning of Commercial Wood Using Solar Energy)

  • 정희석;이형우;이남호;이상봉
    • Journal of the Korean Wood Science and Technology
    • /
    • 제16권4호
    • /
    • pp.10-39
    • /
    • 1988
  • This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

  • PDF

구순 및 구개열 환아 부모의 가족 스트레스와 대처에 관한 연구 (A Study on Family Stress and Coping of the Parents of Child who has a Cleft Lip or / and Cleft Palate)

  • 노난이;탁영란
    • Child Health Nursing Research
    • /
    • 제2권2호
    • /
    • pp.45-57
    • /
    • 1996
  • A serious disease in a family influences the entire family member given the fact that the members closely interact with each other. Especially in terms of pediatric nursing, study on family gains importance as the need to care of families whose children with developmental disabilities and chronic disease This study was done based on The Resiliency Model of Family Adjustment and Adaptation(McCubbin, 1991) is intended to examine the stress of parents whose children suffer from cleft lip or /and cleft palate. It also helps them to cope with the stress and analyze the relationship between the stress and coping This study used Family Inventory of Life Events and Changes (FILE) and Coping Health Inventory for Parents(CHIP) for measuring family stress and coping. The two instruments are revised to fit the social and cultural environment of Korean culture. Data collection was done from April 18, 1996 to May 18, 1996 at 8 University medical centers located in Seoul. Those who answered questionnaires were 84 parents whose children have cleft lip or /and cleft palate. SPSS PC+ was used to analyze the data collotted. Programs used for data analysis were t-test, ANOVA, Pearson correlation coefficient. The study is summarized as follows .1. The average score of family stress is 10.46(percentage of the full score 24.90) and 'finance and business strains'(3.25), and 'intrafamily strains'(2.65) ranked the highest. The average score of family's coping is 1.93, which is close to the answer of' moderately helpful' and they are measured to put their utmost efforts to' intergration and cooperation of family and optimistic definition on the situation'. 2. There is no significant statistical correlation between the family stress and coping. 3. Mothers show more stress than fathers in the parts of 'illness and family care strains' and 'losses'(t〓-2.34, t〓-2.32, p<.05). 4. Fathers show more willingness to cope with the stress than mothers do in the parts of' seeking social support','self-esteem','emotional comfort' 5. Mothers are more stress than fathers in the parts of family stress and its coping with it by usual traits(t〓-2.78, p<.05). Parents with religion are measured to cope more willingly than those who are not 6. Income of a family shows positive correlationship with family coping (r〓.28, p<.05). The study shows that gender difference is significant variable in studying on family stress and coping. Mothers get more stress than fathers, which has much to do with the fact that they are in charge of raising children and keeping houseworks. Accordingly, managing family crisis and its survival can be induced by giving support for the mothers, studying fathers including the rest of the family members and giving nursing care and arbitration ; religious background is also considered to be one of the important factors in family stress , judging from the relationship between family income and family's coping, caring given to suffering children is needed on societal levels. The above considerations bring up the need to have a longitudinal study of children with congenital anomaly including cleft lip or /and cleft palate and their families about family stress and coping. Resiliency programs on family system and their effectiveness and the relationship between the enlarged families with social and cultural values reflecting Korean tradition are also needed to be studied.

  • PDF

Current and Future Perspectives of Lung Organoid and Lung-on-chip in Biomedical and Pharmaceutical Applications

  • 이준형;박지민;김상훈;한에스더;맹성호;한지유
    • 생명과학회지
    • /
    • 제34권5호
    • /
    • pp.339-355
    • /
    • 2024
  • 폐는 생리학적 기능과 해부 조직학적 구조 측면을 통합적으로 고려하여 분석해야만 하는 매우 복잡한 조직이기 때문에 폐질환의 병리학적 연구와 흡입독성 평가에 현재까지 주로 동물모델을 사용하고 있다. 그러나 실험동물 윤리와 동물복지를 이유로 점차적으로 실험동물 수를 줄이자는 전세계적인 움직임에 맞춰 생체 외 동물실험 대체법들이 집중적으로 개발되고 있다. 특히 경제협력개발기구(OECD)와 미국 환경보호청(USEPA)은 2030년대 이후, 동물실험을 금지하기로 잠정적으로 합의함에 따라 의생명공학과 제약 분야에서 생체 외 흡입 독성 및 폐질환 모델들을 확립하고 개발된 모델을 이용한 평가 법들의 표준화 연구가 활발하다. 그 모델 중에 예를 들어, 생체칩(organ-on-a-chip, OoC) 및 오가노이드(organoid) 모델은 3차원 바이오 프린터, 미세 유체 시스템, 인공지능(artificial intelligent) 기술들과 접목되어 연구되고 있다. 이러한 생체 장기를 모방한 복합 장기 생체 외 모델링 시스템은 개체 차이를 가지는 생체 내 동물 실험에 비해 복잡한 생물학적 환경을 보다 정확하게 모방할 수 있을 것으로 기대되고 있으나 생체 모방성, 재현성, 민감성, 기반 데이터베이스의 부족 등 아직은 여러 한계점도 가지고 있다. 따라서 본 리뷰 논문에서는 만능성 줄기 세포 또는 암세포를 이용한 폐포, 폐 공기액 인터페이스(air-liquid interface, ALI) 시스템, 트랜스웰 멤브레인(transwell membrane)을 포함하여 폐 OoC 및 오가노이드의 최근 생체 외 폐 시스템 연구결과들과 AI와 접목된 인실리코(in silico) 폐 모델링에 대한 결과들의 현황을 살펴보고자 한다.

두 종류의 CAD/CAM 지르코니아 전부도재관의 도재 축성 전후의 변연적합도 비교 (Comparison of marginal fit before and after porcelain build-up of two kinds of CAD/CAM zirconia all-ceramic restorations)

  • 신호식;김석규
    • 대한치과보철학회지
    • /
    • 제46권5호
    • /
    • pp.528-534
    • /
    • 2008
  • 연구목적: 변연적합도는 보철수복물의 성공을 좌우하는 중요한 요소 중의 하나이다. McLean과 von Fraunhofer등에 의하면 120 ${\mu}m$ 이하를 임상적으로 허용할 수 있다고 했는데, 이를 넘는 정확하지 않은 변연은 지각과민을 일으키거나 이차 우식을 일으키고, 치태 축적을 용이하게 하여 보철물의 수명을 단축시키게 된다. 이에 최근에 우리나라에 소개되어 임상적으로 사용되고 있는 CAD-CAM 전부도재 수복물 중 $LAVA^{(R)}$ 시스템 (3M ESPE, St. Paul, MN)과 $EVEREST^{(R)}$ 시스템 (KaVo Dental GmbH, Biberach, Germany)으로 제작한 지르코니아 전부 도재관들이 도재전장 금속주조 수복물과 비교해 보아 코핑 상태일 때와 도재축성 후 각각 변연적합도의 차이가 있는지를 살펴보고자 하였다. 재료와 방법: 상악 제1소구치 덴티폼 치아를 high speed diamond bur 로 교합면 2.0 mm, 순설면 1.0 mm, 그리고 변연은 chamfer margin을 6도 측면 경사 절삭 기계로 균일하게 제작해서 이를 인상 채득하여 금속 지대치를 제작하였다. 이를 덴티폼 모형상에 장착한 후 전악인상을 채득하여 $LAVA^{(R)}$ 수복물 코핑, $EVEREST^{(R)}$ 수복물 코핑, 그리고 도재전장 금속주조 수복물 코핑을 각각 8개씩 제작하였다. 이들 코핑을 염색제를 섞은 Fit-checker $II^{(R)}$ (GC Cor., Tokyo, Japan)를 이용하여 금속 지대치에 접합시킨 뒤, $Microhiscope^{(R)}$ system (HIROX KH-1000 ING Plus, Seoul, Korea)을 이용하여 300배율로 관찰하면서 변연 간격을 ${\mu}m$단위로 측정하였다. 도재축성 후에도 마찬가지 방법으로 모든 수복물의 변연간격을 측정하여 통계 처리를 하였다. 결과: 코핑 상태에서의 평균 변연간격 값은 $EVEREST^{(R)}$ 에서 $52.00{\pm}11.94\;{\mu}m$, $LAVA^{(R)}$$ 56.97{\pm}10.00\;{\mu}m$, 그리고 도재 전장 금속 주조 수복물은 $97.38{\pm}18.54\;{\mu}m$를 보였고, 도재축성 후에 평균 변연 간격값은 $EVEREST^{(R)}$$61.69{\pm}19.33\;{\mu}m$, $LAVA^{(R)}$$70.81{\pm}12.99\;{\mu}m$, 그리고 도재 전장 금속 주조 수복물은 $115.25{\pm}23.86\;{\mu}m$를 보였다. 결론: 1. $LAVA^{(R)}$$EVEREST^{(R)}$ 수복물은 도재 전장 금속 주조 수복물과 비교하여 각각 코핑상태일 때와 도재 축성 후 모두 유의성 있는 (P < .05) 차이를 보이는 우수한 변연 적합도를 나타내었다. 2. $LAVA^{(R)}$$EVEREST^{(R)}$ 수복물 간의 평균 변연 간격 비교에서 코핑 상태일 때와 도재 축성 후에 모두 유의성 있는 차이는 없었다 (P > .05). 3. $LAVA^{(R)}$$EVEREST^{(R)}$ 그리고 PFM 은 각각 코어 상태일 때와 비교하여 도재 축성 후 변연 간격에서 약간 증가되었으나 유의성 있는 차이를 보이지는 않았다 (P > .05).

국산 유용 수종재의 인공건조 특성에 관한 연구 (Studies on the Kiln Drying Characteristics of Several Commercial Woods of Korea)

  • 정병재
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권2호
    • /
    • pp.8-12
    • /
    • 1974
  • 한국의 목재 인공 건조법을 개발하기 위하여 필자의 전직 대학인 전북대학교 전 김두헌 총장님, 동농대전 백남혁학장 및 동농대교수 제위의 각별한 협조를 얻어 1956년 고액을 지불하고 미국 More Dry Kiln Co.에서 최신의 목재 인공 건조 장치를 도입하여 전북 농대 임학과에 설치하게된 것이다. 그러나 이 건조 시설을 활용하는데는 많은 지장이 있었으므로 1959년 전기 More Dry Kiln의 온, 습도 조절장치만을 이용한 소형 Dry kiln을 제작하여 본 시험을 실시한 것이다. 공시수종은 소나무, 낙엽송, 은행나무, 전나무, 밤나무 및 감나무등이며, 공시목의 크기는 것이 60cm, 넓이 10cm 및 두께 15-35mm이다. 실험한 건조 조건은 건조 온도를 일정히 ($170^{\circ}F$)하고, 관계습도를 각종으로 변화할때 얻어지는 건조 속도를 측정하는 동시에 각 건조조건에 의하여 유발되는 건조결함을 조사하여 공시목의 초기 함수율과 건조 최경함수율 특히 shell의 함수율과의 비가 이들의 결함 형성 특히 표면경화(casehardening) 형성에 미치는 영향을 구명하였으며 또한 casehardening 계산식을 유도하였다. 1. 목재내부에 형성된 응력 즉 prong이 개주할 때의 응력은 prong이 서로 접합할 때의 응력을 100으로 하는 백분율에 의하여 다음식으로 표시할 수 있다. 단, 응력 측정에 사용한 prong은 그림 1과 같이 작성하여야 한다. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ 상식은 다음과 같은 간이식을 사용할 수 있다. $CH=\frac{A-B'}{A}{\times}200%$ 2. 일정 한 건조 조건하에 건조하여 항중에 달하고, 또한 normal casehardening을 형성하는 경우에 는, 그 sample board의 shell 의 함수율은 특히 얇은 sample board에 있어서 US Dep. Agr., Forest Products Laboratory에서 발표한 EMC 보다 낮다. 3. 본 실험에서 측정한 1시간당 목재 건조 표면적 $1cm^2$ 당 증발하는 증발량 즉 건조속도를 비교 검토한 결과 다음과 같은 순위로 되었으며, 비교 검토한 5수 종중 최대치를 유하는 은행나무 MC 20% 에 있어서 최저치를 표시한 밤나무의 3.8배가 된다. (표 1 참조) (1) 은행나무 (2) 감나무 (3) 소나무 (4) 낙엽송 (5) 밤나무 특히 함수율 26% 이하에 있어서 각 함수율에 대한 증발속도치는 다음과 같은 일차식으로 표시 할 수 있으며, 그 회귀계수 유의성 검정에 있어서의 T치는 다음과 같이 각각 고율의 유의성을 표시하였다. (표2 참조) 상기중 Y는 증발속도($g/cm^2hr$.), X는 함수율을 각각표시한다. 이들 회귀직선을 도시하면 그림 2와 같다. 4. 초기함수율과 건조 최종기에 있어서의 목재의 표층 함수율 즉 shell의 함수율과의 비(SR)가 casehar dening 형성에 미치는 영향은 다음과 같다. 어떤 SR 값에 관하여 그 SR 값 이하를 유하는 총개제수(N) 중 CH 제4급이 출현하는 수(D)의 확율 즉 N에 대한 D의 출현확율 P%는 표 3과 같다. (D의 출현확율 P%를 위험확율이라고 가칭한다.) 표 4에 있어서 종란의 1,2,3의 숫자는 각각 다음과 같은 사항을 표시한다. (1) CH 값 제 4급이 출현하지 아니 하는 안전한 최소 SF 값 (2) 위험을 30%를 허용하는 경우에 있어서의 SF 값의 한계 (3) CH 값 제 4급 이하가 발생하지 아니하는 위험율 100%의 값의 범위 상기한 실측 결과에 의하여 밤나무, 낙엽송등은 내부응력 형성이 용이한데 비하여 감나무, 소나무등은 내부응력 형성이 용이하지 아니하여, 특히 전나무, 은행나무등은 타수종과 동일한 건조조건에 있어서 reverse casehardening을 초래함에 비추워 타수종에 비하여 현저히 내부응력 특히 normal casehardening이 잘 형성되지 아니한다는 것을 알 수 있다. 5. casehardening을 제외한 각종의 drying defects는 long time loading에 있어서 그 내부응력이 ultimate stress를 초과할 때 나타나는 것인데 건조조건 온도 $170^{\circ}F$에 대하여 습도를 낮게하여도 그렇게 심하지 아니하나, 온도 $200^{\circ}CF$의 저습에 있어서 end coating을 하지 아니하는 경우에는 용이하게 발생한다. 특히 밤나무는 실험한 타수종에 비하여 casehardening 및 활열성 defects가 강한 것을 지적할 수 있다.

  • PDF

유전자 알고리즘을 이용한 다분류 SVM의 최적화: 기업신용등급 예측에의 응용 (Optimization of Multiclass Support Vector Machine using Genetic Algorithm: Application to the Prediction of Corporate Credit Rating)

  • 안현철
    • 경영정보학연구
    • /
    • 제16권3호
    • /
    • pp.161-177
    • /
    • 2014
  • 기업신용등급은 금융시장의 신뢰를 구축하고 거래를 활성화하는데 있어 매우 중요한 요소로서, 오래 전부터 학계에서는 보다 정확한 기업신용등급 예측을 가능케 하는 다양한 모형들을 연구해 왔다. 구체적으로 다중판별분석(Multiple Discriminant Analysis, MDA)이나 다항 로지스틱 회귀분석(multinomial logistic regression analysis, MLOGIT)과 같은 통계기법을 비롯해, 인공신경망(Artificial Neural Networks, ANN), 사례기반추론(Case-based Reasoning, CBR), 그리고 다분류 문제해결을 위해 확장된 다분류 Support Vector Machines(Multiclass SVM)에 이르기까지 다양한 기법들이 학자들에 의해 적용되었는데, 최근의 연구결과들에 따르면 이 중에서도 다분류 SVM이 가장 우수한 예측성과를 보이고 있는 것으로 보고되고 있다. 본 연구에서는 이러한 다분류 SVM의 성능을 한 단계 더 개선하기 위한 대안으로 유전자 알고리즘(GA, Genetic Algorithm)을 활용한 최적화 모형을 제안한다. 구체적으로 본 연구의 제안모형은 유전자 알고리즘을 활용해 다분류 SVM에 적용되어야 할 최적의 커널 함수 파라미터값들과 최적의 입력변수 집합(feature subset)을 탐색하도록 설계되었다. 실제 데이터셋을 활용해 제안모형을 적용해 본 결과, MDA나 MLOGIT, CBR, ANN과 같은 기존 인공지능/데이터마이닝 기법들은 물론 지금까지 가장 우수한 예측성과를 보이는 것으로 알려져 있던 전통적인 다분류 SVM 보다도 제안모형이 더 우수한 예측성과를 보임을 확인할 수 있었다.

지구통계 기법을 이용한 오일샌드 저류층 해석 및 스팀주입중력법을 이용한 비투멘 회수 적지 선정 사전 연구 (A Characterization of Oil Sand Reservoir and Selections of Optimal SAGD Locations Based on Stochastic Geostatistical Predictions)

  • 정진아;박은규
    • 자원환경지질
    • /
    • 제46권4호
    • /
    • pp.313-327
    • /
    • 2013
  • 본 연구에서는 캐나다 아사바스카 지역의 맥머레이층에 대한 3차원 지구통계 모사를 실시하였으며 모사 결과를 바탕으로 심부지열회수방법을 통한 경제적 산출 가능 지역을 가늠하고자 하였다. 비투멘의 효율적인 생산을 위하여 SAGD 공법의 최적 입지를 선정하는데 있어 스팀챔버의 충분한 수직적 연장성을 확보하는 것은 중요한 사항이다. 연구지역에서 획득한 110개의 시추공 자료에 대하여 마르코프 전이 확률 기반의 분석을 실시하였으며 이를 바탕으로 맥머레이층 구성 암상에 대한 추계론적 예측을 실시하였다. 추계론적 모사를 통하여 획득한 다중재현을 기반으로 앙상블 확률 분포도를 제작하였으며 이는 각 암상이 분포 할 수 있는 포텐셜을 보여준다. 앙상블 확률 분포도를 이용하여 투수성 퇴적층(역질 퇴적층 및 사질 퇴적층)에 대한 누적 층후도를 구성하였으며 이를 바탕으로 SAGD 공법이 적용될 수 있는 최적 입지를 선정하였다. SAGD 최적 입지 선정을 위한 추가적인 분석을 실시하기 위하여 전이율을 바탕으로 한 단일 퇴적층의 평균적인 수직 및 수평적 연장성을 산정하였다. 투수성 퇴적층의 평균적인 수직적 연장성은 대체로 투수성 퇴적층에 대한 누적층후도 분포도와 유사한 분포 양상을 보이나 일부 누적 층후가 큰 위치에서 유사하지 않은 양상을 보인다. 이는 누적 층후도와 평균적인 수직적 연장성 분포 양상이 유사하지 않은 지역은 투수성 퇴적층과 다른 암상과의 교호성은 매우 크나 투수성 퇴적층의 수직적인 연장성은 좋지 않음을 의미한다. 따라서 누적층후도 뿐 만 아니라 투수성 퇴적층의 수직적 연장성 또한 충분히 고려하였을 때 건전한 SAGD 최적 입지를 선정하는데 충분히 신뢰성 있는 결론을 도출 할 것으로 판단된다.

Relationship between Brand Personality and the Personality of Consumers, and its Application to Corporate Branding Strategy

  • Kim, Young-Ei;Lee, Jung-Wan;Lee, Yong-Ki
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.27-57
    • /
    • 2008
  • Many consumers enjoy the challenge of purchasing a brand that matches well with their own values and personalities (for example, Ko et al., 2008; Ko et al., 2006). Therefore, the personalities of consumers can impact on the final selection of a brand and its brand personality in two ways: first, the consumers may incline to purchase a brand or a product that reflects their own personalities; second, consumers tend to choose a company that has similar brand personalities to those brands that are being promoted. Therefore, the objectives of this study are following: 1. Is there any empirical relationship between a consumer's personality and the personality of a brand that he or she chooses? 2. Can a corporate brand be differentiated by the brand personality? In short, consumers are more likely to hold favorable attitudes towards those brands that match their own personality and will most probably purchase those brands matching well with their personality. For example, Matzler et al. (2006) found that extraversion and openness were positively related to hedonic product value; and that the personality traits directly (openness) and indirectly (extraversion, via hedonic value) influenced brand effects, which in turn droved attitudinal and purchase loyalty. Based on the above discussion, the following hypotheses are proposed: Hypothesis 1: the personality of a consumer is related to the brand personality of a product/corporate that he/she purchases. Kuksov (2007) and Wernerfelt (1990) argued that brands as a symbolic language allowed consumers to communicate their types to each other and postulated that consumers had a certain value of communicating their types to each other. Therefore, how brand meanings are established, and how a firm communicate with consumers about the meanings of the brand are interesting topics for research (for example, Escalas and Bettman, 2005; McCracken, 1989; Moon, 2007). Hence, the following hypothesis is proposed: Hypothesis 2: A corporate brand identity is differentiated by the brand personality. And there are significant differences among companies. A questionnaire was developed for collecting empirical measures of the Big-Five personality traits and brand personality variables. A survey was conducted to the online access panel members through the Internet during December 2007 in Korea. In total, 500 respondents completed the questionnaire, and considered as useable. Personality constructs were measured using the Five-factor Inventory (NEO-FFI) scale and a total of 30 items were actually utilized. Brand personality was measured using the five-dimension scale developed by Aaker (1997). A total of 17 items were actually utilized. The seven-point Likert-type scale was the format of responses, for example, from 1 indicating strongly disagreed to 7 for strongly agreed. The Analysis of Moment Structures (AMOS) was used for an empirical testing of the model, and the Maximum Likelihood Estimation (MLE) was applied to estimate numerical values for the components in the model. To diagnose the presence of distribution problems in the data and to gauge their effects on the parameter estimates, bootstapping method was used. The results of the hypothesis-1 test empirically show that there exit certain causality relationship between a consumer's personality and the brand personality of the consumer's choice. Thus, the consumer's personality has an impact on consumer's final selection of a brand that has a brand personality matches well with their own personalities. In other words, the consumers are inclined to purchase a brand that reflects their own personalities and tend to choose a company that has similar brand personalities to those of the brand being promoted. The results of this study further suggest that certain dimensions of the brand personality cause consumers to have preference to certain (corporate) brands. For example, the conscientiousness, neuroticism, and extraversion of the consumer personality have positively related to a selection of "ruggedness" characteristics of the brand personality. Consumers who possess that personality dimension seek for matching with certain brand personality dimensions. Results of the hypothesis-2 test show that the average "ruggedness" attributes of the brand personality differ significantly among Korean automobile manufacturers. However, the result of ANOVA also indicates that there are no significant differences in the mean values among manufacturers for the "sophistication," "excitement," "competence" and "sincerity" attributes of the corporate brand personality. The tight link between what a firm is and its corporate brand means that there is far less room for marketing communications than there is with products and brands. Consequently, successful corporate brand strategies must position the organization within the boundaries of what is acceptable, while at the same time differentiating the organization from its competitors.

  • PDF

Vibrio vulnificus 균의 분포 및 세균학적 특성 (Distribution and Bacteriological Characteristics of Vibrio vulnificus)

  • 장동석;신일식;최승태;김영만
    • 한국수산과학회지
    • /
    • 제19권2호
    • /
    • pp.118-126
    • /
    • 1986
  • 1985년 7월에서 10월 사이에 부산연안지역에서 수집한 해수, 낙지, 피조개, 게, 우렁쉥이 등 70종의 시료에서 Vibrio vulnificus의 검출률과 시료에서 분리된 균의 세균학적 특성을 조사한 결과는 다음과 같다. 1. Vibrio vulnificus의 월별 검출률은 수온이 높은 8월에 $19.2\%$로 가장 높았으며 7월에 $7.7\%$ 10월에 $5.5\%$로 수온과 비례하여 나타났으며 7월과 10月 사이의 평균검출률은 $11.4\%$였다. 시료별 검출률은 서식해역의 오염도가 높고 오염된 해수와의 접촉부위가 많은 피조개와 게에서 $20\%$로 가장 높았으며 낙지 해수의 순으로 나타났다. 2. 시료에서 분리된 균과 환자에게 분리된 균의 생화학적인 차이점은 없었으며, 분리된 본균이 다른 Vibrio균과 구별될 수 있는 생화학적 특징은 ONPG 가수분해양성, lactose 분해양성, 식염내성이 $7\%$이하인 점이다. 3. 이균의 최적배양조건은 pH 8.0, 온도 $35^{\circ}C$부근이었으며, 배양온도별 비증식속도와 평균세대시간은 $35^{\circ}C$진탕배양에서 $1.21\;hr^{-1}$, 34min으로 가장 빨랐으며 $35^{\circ}C$ 정치배양, $40^{\circ}C$ 정치배양, $25^{\circ}C$ 진탕배양 $25^{\circ}C$ 정치배양의 순이었다. 4. 이 균은 장내세균분리용배지인 EMB, SS, DC 한천배지에서는 증식하지 못했으며 MC 한천배지상에서의 집낙의 특징은 적색 혹은 무색으로 나타났고 Endo 한천배지상에서는 적색, TCBS 한천배지상에서는 녹색집낙으로 나타났다. 5. 이 균을 $4^{\circ}C$에 냉장하였을 경우 매 16시간마다 약 1 log cycle씩 감소하였으며 $-18^{\circ}C$에 동결하였을 때는 거의 다 사멸하였다.

  • PDF