• Structural Engineering and Mechanics
• /
• v.82 no.1
• /
• pp.121-131
• /
• 2022

The main goal of this study is to prepare a program for analyzing High Strength Steel Fibrous Reinforced Concrete (HSSFRC) slabs and predict the response and strength of the slab instead of preparing a prototype and testing it in the laboratory. For this purpose, new equations are proposed to represent the material properties of High Strength Steel Fibrous Reinforced Concrete. The proposed equations obtained from performing regression analysis on many experimental results using statistical programs. The finite element method is adopted for non-linear analysis of the slabs. The eight-node "Serendipity element" (3 DoF) is chosen to represent the concrete. The layered approach is adopted for concrete elements and the steel reinforcement is represented by a smeared layer. The compression properties of the concrete are modeled by a work hardening plasticity approach and the yield condition is determined depending on the first two stress invariants. A tensile strength criterion is adopted in order to estimate the cracks propagation. many experimental results for testing slabs are compared with the numerical results of the present study and a good agreement is achieved regarding load-deflection curves and crack pattern. The response of the load deflection curve is slightly stiff at the beginning because the creep effect is not considered in this study and for assuming perfect bond between the steel reinforcement and the concrete, however, a great agreement is achieved between the ultimate load from the present study and experimental results. For the models of the tension stiffening and cracked shear modulus, the value of Bg and Bt (Where Bg and Bt are the curvature factor for the cracked shear modulus and tension stiffening models respectively) equal to 0.005 give good results compared with experimental result.

• Journal of Korean Dental Science
• /
• v.17 no.2
• /
• pp.64-74
• /
• 2024

This case report presents the long-term radiographic outcomes of a novel approach for simultaneous lateral augmentation and implant surgery. A 60-year-old male patient who required tooth extraction of the maxillary central and lateral incisors due to trauma visited the clinic. After tooth extraction, severe horizontal and vertical deficiencies occurred owing to atrophy of the alveolar ridge, and a simultaneous guided bone regeneration (GBR) procedure was planned along with the installation of two implants. In the present case, a modification of the conventional 'sandwich technique' was used by placing the mixture of autogenous bone chips and xenografts at the outermost layer to maximize the osteogenic potential at the coronal part of augmentation while applying solely xenografts at the inner layer. To enhance volumetric stability, an autogenous block of periosteum harvested from the maxillary tuberosity was incorporated between the two layers. Cone-beam computed tomography was performed at baseline and 3 years after the surgery to compare radiographic outcomes. Dehiscence after fixture installation was successfully observed at the re-entry of the surgery site. Three years after the surgery, average horizontal bone gains of 6.11 mm and 4.12 mm were observed in the maxillary central and lateral incisor areas, respectively. Healthy peri-implant mucosa and well maintained marginal bone levels were observed 8 years after the surgery, meeting the criteria for implant success. The findings of this case suggest that a substantial amount of horizontal bone gain can be obtained with a layered approach using autogenous bone materials and xenografts, highlighting the advantages of incorporating autogenous blocks into the simultaneous GBR procedure.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.171-177
• /
• 2018

In 3D printing technologies, many parameters should be optimized for obtaining a part with higher quality. FDM (fused deposition modeling) printer has also diverse parameters to be optimized. Among them, it can be said that nozzle temperature and moving speed of nozzle are fundamental parameters. Thus, it should be preceded to know the optimal combination of the two parameters in the use of FDM 3D printer. In this paper, a new method is proposed to estimate the range of the stable combinations of the two parameters, based on the single line quality. The proposed method was verified by comparing the results between single line printing and multi-layered single line printing. Based on the comparison, it can be said that the proposed method is very meaningful in that it has a simple test approach and can be easily implemented. In addition, it is very helpful to provide the basic data for the optimization of process parameters.

• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.775-782
• /
• 2002

As electronic commerce systems have been widely used, the necessity of adaptive e-commerce agent systems has been increased. These kinds of agents can monitor customer's purchasing behaviors, clutter them in similar categories, and induce customer's preference from each category. In order to implement our adaptive e-commerce agent system, we focus on following 3 components-the monitor agent which can monitor customer's browsing/purchasing data and abstract them, the conceptual cluster agent which cluster customer's abstract data, and the customer profile agent which generate profile from cluster, In order to infer more accurate customer's preference, we propose a 2 layered structure consisting of conceptual cluster and inductive profile generator. Many systems have been suffered from errors in deriving user profiles by using a single structure. However, our proposed 2 layered structure enables us to improve the qualify of user profile by clustering user purchasing behavior in advance. This approach enables us to build more user adaptive e-commerce system according to user purchasing behavior.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.45-58
• /
• 2017

As many seismic codes for various facilities are changed into a performance based design code, demand for a reliable nonlinear response-history analysis (RHA) arises. However, the equivalent linear analysis has been used as a standard approach since 1970 in the field of site response analysis. So, the reliability of nonlinear RHA should be provided to be adopted in replace of equivalent linear analysis. In this paper, the reliability of nonlinear RHA is reviewed for a layered soil layer using Loma Prieta earthquake records in 1989. For this purpose, the appropriate way for selecting nonlinear soil models and the effect of base boundary condition for 3D analysis are evaluated. As a result, there is no significant differences between equivalent linear and nonlinear RHA. In case of 3D analysis, absorbing boundary condition should be applied at base to prevent rocking motion of the whole model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.1035-1041
• /
• 2013

To evaluate the structural integrity and dynamic characteristic of the knuckle part of a KTX anti-roll bar, an experimental and a numerical approach were used in this study. In the experimental approach, the acceleration and strain data for the knuckle parts of the KTX and KTX-SANCHUN anti-roll bar were respectively measured to evaluate and compare its structural dynamic characteristics under the operating environments of the Honam line. In the numerical approach, the evaluation of its structural integrity was conducted using LS-DYNA 3D, and then, the reliability of the finite element model used was ensured by a comparative evaluation with the experiment. The numerical results showed that the stress and velocity field of the knuckle part composed of a layered structure of a thin steel plate and rubber were more moderate than those of the knuckle part made of only a thick steel block owing to the reduction of relative contact between the knuckle and the connecting rod. It was found that the knuckle part made of a thin steel plate and rubber was recommended as the best solution to improve its structural integrity resulting from the elastic behavior of the KTX anti-roll bar being enabled under a repeating external force.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.281.1-281.1
• /
• 2016

Transition metal dichalcogenides (TMDCs) are promising layered structure materials for next-generation nano electronic devices. Many investigation on the FET device using TMDCs channel material have been performed with some integrated approach. To use TMDCs for channel material of top-gate thin film transistor(TFT), the study on high-k dielectrics on TMDCs is necessary. However, uniform growth of atomic-layer-deposited high-k dielectric film on TMDCs is difficult, owing to the lack of dangling bonds and functional groups on TMDC's basal plane. We demonstrate the effect of remote oxygen plasma pretreatment of large area synthesized few-layer MoSe2 on the growth behavior of Al2O3, which were formed by atomic layer deposition (ALD) using tri-methylaluminum (TMA) metal precursors with water oxidant. We investigated uniformity of Al2O3 by Atomic force microscopy (AFM) and Scanning electron microscopy (SEM). Raman features of MoSe2 with remote plasma pretreatment time were obtained to confirm physical plasma damage. In addition, X-ray photoelectron spectroscopy (XPS) was measured to investigate the reaction between MoSe2 and oxygen atom after the remote O2 plasma pretreatment. Finally, we have uniform Al2O3 thin film on the MoSe2 by remote O2 plasma pretreatment before ALD. This study can provide interfacial engineering process to decrease the leakage current and to improve mobility of top-gate TFT much higher.

• The Journal of Society for e-Business Studies
• /
• v.11 no.3
• /
• pp.53-71
• /
• 2006

In order to cope with the rapidly changing product development environment, individual manufacturing enterprises are forced to collaborate with each other through establishing a virtual organization. In collaboration, designated organizations work together for mutual gain based on product data interoperability. However, product data interoperability is not fully facilitated due to semantic inconsistency among product data models of individual enterprises. In order to overcome the semantic inconsistency problem, this paper proposes a reference ontology, Reference Domain Ontology(RDO), and a methodology for product data interoperability with semantic consistency using RDO. RDO describes semantics of product data model and metamodel for all application domains in a virtual organization. Using RDO, application domains in a virtual organization can easily understand the product data models of others. RDO is agile and temporal such that it is created with the formation of a virtual organization, copes with changes of the organization, and disappears with the vanishment of the organization. RDO is built by a hybrid approach of top-down using a upper ontology and bottom-up based on the merging of ontologies of application domains in a virtual organization. With this methodology, every domain in a virtual organization can achieve product data model interoperability without model transformation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.20-30
• /
• 2003

This study is aimed at establishing the categories and items for ecological assessment and evaluation of the environmental friendliness of golf courses in the capital region of Korea. The categories and items for the assessment have been derived based on the existing literature and interviews with golf experts. This study covers 32 golf courses in the capital region of Korea that are available in terms of data and on-site surveys. In order to conduct a comprehensive assessment of the environmental friendliness of the golf courses, the assessment area was divided into 4 categories that include a total of 14 sub-categories. The 4 categories encompass 1) location, 2) topography, 3) vegetation, and 4) construction. As its sub-categories, the location category includes current land use and zoning in the National Land Use Management Law. Topography has 2 sub-categories in the damage ratio of existing topography, gradient, cut area, and slope height. The assessment of vegetation is largely based on site surveys in the categories of preservation of the existing vegetation, the use of natural resources and existing trees, the component ratio of native tree species, the multi-layered structure of vegetation, and the utilization of water purification plants. In the aspect of construction, afforestation on tile slopes and the utilization of existing surface soil were evaluated. The examination of comparative analysis among the 10 items as a ratio measure showed that the scores were low in the sub-categories of current land we, the use of existing trees, and the multi-layered structure of vegetation. However, the rating results were satisfactory in the 2 sub-categories including cut area, and the utilization of native tree species. Those proved to be contributing factors in the ecological health of the golf courses. According to correlation analysis of the 10 items to the overall ecological rating of each golf course, the sizes of the 32 golf courses were mainly affected by the damage ratio of existing topography, gradient, preservation of vegetation and slope height. This study has the initiative to conduct an ecological assessment of golf courses in the country based on site surveys. The study results revealed that location factors such as current land use, damage ratio of topography and gradient and topographical factors were the main factors affecting the environmental friendliness of golf courses. This indicates indicating the significance of these factors in the future construction practices of golf courses. Furthermore, this study raises the need for follow-up studies to establish more detailed assessment criteria and to develop assessment techniques for areas such as slope afforestation and water purification plants that need a qualitative approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3265-3276
• /
• 1996

The studies of document recongnition have been focused mainly on Korean documents. But most of documents composed of Korean and other characters. So, in this paper, we propose the document recognition system that can recognize the multi-size, multi font and mixed type characters. We have utilized a large scale network model, "CombNET" which consists of a 4 layered network with combstructure. And we propose recognition method that can recognize characters without discrimination of character type. The first layer constitutes a Kohonen's SOFM network which quantizes an input feature vector space into several sub-spaces and the following 2-4 layers constitutes BP network modules which classify input data in each sub-space into specified catagories. An experimental result demonstrated the usefulness of this approach with the recognition rates of 95.6% for the training data. For the mixed type character documents we obtained the recognition rates of 92.6% and recognition speed of 10.3 characters per second.