연구배경: 기도의 과민성과 더불어 반응성의 이상도 기관지천식의 병태생리에 관여한다. 고해상도 전산화 단층촬영술(HRCT)은 기관지조영술보다 비칩습적(non-invasive)이며, 더욱이 기도의 내강을 2차원적으로 측정이 기능하게 되어 훨씬 더 정확하고 신뢰있는 기도의 면적(dimension)을 얻을 수 있다. 방법: 기관지천식에서 메타콜린 기관지유발에 의한 기도 내강의 변화를 관찰하고자 HRCT(5000T CT, Shimadzu Co, Japan)를 이용하여 직접 기도의 반응을 영상화하였다. film scanner(TZ-3X scanner; Truvel Co, Chatsworth CA, USA)를 이용하여 scan 하고 a semiautomated region growing method로 면적을 측정 하였다. 5명의 기관지천식환자에서 $FEV_1$이 20%이상의 감소를 유발하여 기도 내강의 면적이 수축하는 정도를 측정하고, 유발전과 후에 기도의 크기와 폐의 구역에 따른 차이를 알아 보았다. 결과: 1) 메타콜린 흡입후 $FEV_1$이 24.2%에서 45.3%까지 의미있는 수축을 하였으며, 이들에서 기관지수축전후 비교할 수 있는 기도는 상폐야에서는 4개에서 8개, 하폐야에서는 2개에서 6개, 한 환자에서 9개에서 12개까지 면적의 측정이 가능하였다. 2) 메타콜린에 의한 기도의 수축률은 한 환자내에서도 차이가 많았다. 3) 평균 직경 2 mm(면적 $3.14\;mm^2$)이하의 소기도(43개)에서는 48.7%(8.3; SEM) 이였으며, 직경 2mm보다 큰 중심기도(10개)에서는 53.8%(4.4; SEM)으로 소기도에서 더 많은 수축률을 보이는 경향이었으나, 통계적으로 의미있지는 않았다.(p>0.05). 4) 상폐야의 기도(30개)의 수축은 44.3%(5.8; SEM)이었고, 하폐야의 기도(23개)는 56.7%(4.5; SEM)으로 차이가 없었다(p>0.05). 결론: 메타콜린에 의한 기도의 수축은 한 환자 내에서도 차이가 많으며, 폐의 구역이나 기도의 크기에 따른 차이도 없었다. 그 기전에 관하여는 연구가 필요할 것으로 생각된다.
목적 : 선형가속기 ML-15MDX의 전자선에너지 대한 출력선량계수가 Applicator크기에 따라 결정되도록 하며 각 Applicator에서 정방형조사면과 직사각형조사변에 대한 출력선량계수는 측정값으로 부터 다항식을 이용하여 결정되었다. 방법 : 실험에서, 출력선량의 측정은 전자선에너지 4, 6, 9, l2MEV대해 2$\times$2$cm^2$에서 20$\times$20$cm^2$까지 이루어졌다. 출력선량계수는 각 아프리케이터의 조사면중심선속의 최대선량에 대한 임의 조사면의 최대선량의 비로 얻어졌고 각 아프리케이터의 출력선량계수는 기준 아프리케이터(10$\times$10$cm^2$)와 비교되었다. 전자선조사면의 차폐는 모든 실험에너지 영역에서 균등하게 10mm 두께의 Lipowitz(밀도 9.4g/$cm^2$)를 사용하였으며, 조사면크기 및 모양 결정이 용이하도록 고안하여 사용되었다. 임의의 전자선조사면에 대한 출력선량계수는 조사면의 한변을 고정한 직사각형의 출력선량 계수를 이용한 1-Dimension방법에 의한 다항식으로 부터 구하였다. 결과 : 직사각형의 전자선조사면에 대한 출력선량계수는 4$\times$4$cm^2$에서 20$\times$20$cm^2$의 범위에서는 2%이내의 불확실성을 보였으며, 이들 보다 작은 직사각형조사면에서는 약 3%의 오차를 보였다. 결론 : 전자선에너지의 정사각형 및 직사각형조사변에 대한 출력선량계수가 실험자료를 이용한 다항식으로 부터 실제값에 매우 근사한 예상값을 얻을 수 있었다.
최근 비행시간 (Time-of-Flight, TOF) 원리에 기반한 깊이 카메라의 등장과 함께 저해상도 깊이 카메라와 고해상도 컬러 카메라로 이루어진 복합형 카메라 시스템 (Fusion Camera System) 이 각광을 받고 있다. 복합형 카메라 시스템에서 취득한 저해상도 깊이맵을 컬러 영상과 같은 영상 평면 (Image Plane) 에 위치시키고 같은 해상도를 가질 수 있게 하려면 카메라 보정 및 3차원 투영, 홀 (Hole) 채우기와 같은 일련의 전처리 과정이 필요하다. 그러나 전처리 과정을 거친 깊이맵은 깊이 카메라의 내부 특성, 카메라 보정의 부정확성 등에 의해 많은 오차를 가진다. 그러므로 본 논문에서는 오차가 많은 상황에서도 강건하게 동작하는 깊이맵 업샘플링 방법을 제안한다. 먼저, 전처리 과정을 통해 얻은 깊이 정보의 신뢰도를 컬러 영상과의 상관관계에 기반하여 측정한다. 그리고 낮은 신뢰도의 깊이 정보를 참조하지 않는 수정된 커널 회기법 (Kernel Regression)을 통해 깊이맵과 컬러 영상의 경계 정합을 수행하여 세밀한 깊이 표현이 가능한 고해상도 깊이맵을 형성한다. 제안하는 알고리즘은 깊이 정보의 신뢰도 정의와 그에 따른 참조를 통해 카메라 보정 결과가 부정확하더라도 높은 성능의 깊이맵 생성을 보장한다. 실험결과를 통해 기존의 깊이맵 업샘플링 기술보다 제안하는 방법이 더 정확한 깊이 정보를 제공하는 것을 확인할 수 있다.
An, Ji Won;Choi, Eun Kyeong;Park, Chol Hee;Choi, Jong Bum;Ko, Dong-Kyun;Lee, Youn-Woo
The Korean Journal of Pain
/
제28권2호
/
pp.109-115
/
2015
Background: This study sought to determine safe ranges of oblique angle, skin entry point and needle length by reviewing computed tomography (CT) scans and to evaluate the usefulness of a bent tip needle during celiac plexus block (CPB). Methods: CT scans of 60 CPB patients were reviewed. Image of the uppermost margin of L2 vertebral body was used to measure the minimal and maximal oblique angles and the distances from the midline to skin puncture point. The imaginary needle trajectory distance was calculated by three-dimensional measurement. When the procedure was performed by using a $10^{\circ}$ bent tip needle under a $20^{\circ}$ oblique X-ray fluoroscopic view, the distance (GF/G'F) from the midline to the actual puncture site was measured. Results: The imaginary safe oblique angle range was $26.4-34.2^{\circ}$ and $27.7-36.0^{\circ}$ on the right and left, respectively. The distance from the midline to skin puncture point was 6.1-7.6 cm on the right and 6.3-7.6 cm on the left. The needle trajectory distance at minimal angle was 9.6-11.6 cm on the right and 9.5-11.5 cm on the left. The distance of GF/G'F was 5.1-6.5 cm and 5.0-6.4 cm on the right and left, respectively. All imaginary parameters were correlated with BMI except for GF/G'F. All complications were mild and transient. Conclusions: We identified safe values of angles and distances using a straight needle. Furthermore, using a bent tip needle under a $20^{\circ}$ oblique fluoroscopic view, we could safely perform CPB with smaller parameter values.
팔당호의 수심측량자료와 1997년의 유출${\cdot}$입 유량을 이용하여 RMA-2 수리모형의 팔당호 유속자료를 모의실험한 결과를 정리하면 다음과 같다. 1) 팔당호에 대한 RMA-2 수리모형의 민감도 분석결과 조도계수보다는 난류교환계수가 유속의 변화에 더 민감한 영향을 미치는 것으로 나타났다. 2) 팔당호에 RMA-2를 적용한 결과, 유속의 크기는 완충지역 역할을 하는 경안천 유입부인 남쪽보다는 방류량과 취수량에 영향을 받는 팔당호 북쪽이 10배 정도 크게 계산되었으며, 팔당호 내부의 물의 흐름은 7월까지는 흐름의 방향이 상류에서 하류방향으로 흐르는 정상적인 상태를 보이다가, 7월 이후 유입량이 많아짐에 따라 댐에서의 차단효과 때문에 경안천 및 소내섬 쪽으로 역류를 하는 것으로 나타나 팔당호 내부의 물의 흐름 방향과 지점별 상대적인 크기를 비교할 수 있었다. 3) 팔당호 내부의 역류 현상은 유입량과 유출량이 평형을 이루는 12월까지 지속되며, 특히 소내섬을 중심으로 반시계방향으로 회전하는 현상이 이 시기에 뚜렷하게 나타나, 수질이나 퇴적현상을 예측할 경우 이들을 반드시 고려해야 할 것으로 판단된다. 4) RMA-2모형에 의하여 좀더 정확한 유속을 예측하기 위해서는 실축유속 및 지형자료의 갱신 및 축적이 필요하다.
Surface plasmon polaritons (SPPs) have attracted the attention of scientists and engineers involved in a wide area of research, microscopy, diagnostics and sensing. SPPs are waves that propagate along the surface of a conductor, usually metals. These are essentially light waves that are trapped on the surface because of their interaction with the free electrons of conductor. In this interaction, the free electrons respond collectively by oscillating in resonance with the light wave. The resonant interaction between the surface charge oscillation and the electromagnetic field of the light constitutes the SPPs and gives rise to its unique properties. In this papers, we studied theoretical and experimental extraordinary transmittance (T) and reflectance (R) of 2 dimensional metal hole array (2D-MHA) on GaAs in consideration of the diffraction orders. The 2d-MHAs was fabricated using ultra-violet photolithography, electron-beam evaporation and standard lift-off process with pitches ranging from 1.8 to $3.2{\mu}m$ and diameter of half of pitch, and was deposited 5-nm thick layer of titanium (Ti) as an adhesion layer and 50-nm thick layer of gold (Au) on the semiinsulating GaAs substrate. We employed both the commercial software (CST Microwave Studio: Computer Simulation Technology GmbH, Darmstadt, Germany) based on a finite integration technique (FIT) and a rigorous coupled wave analysis (RCWA) to calculate transmittance and reflectance. The transmittance was measured at a normal incident, and the reflectance was measured at variable incident angle of range between $30^{\circ}{\sim}80^{\circ}$ with a Nicolet Fourier transmission infrared (FTIR) spectrometer with a KBr beam splitter and a MCT detector. For MHAs of pitch (P), the peaks ${\lambda}$ max in the normal incidence transmittance spectra can be indentified approximately from SP dispersion relation, that is frequency-dependent SP wave vector (ksp). Shown in Fig. 1 is the transmission of P=2.2 um sample at normal incidence. We attribute the observation to be a result of FTIR system may be able to collect the transmitted light with higher diffraction order than 0th order. This is confirmed by calculations: for the MHAs, diffraction efficiency in (0, 0) diffracted orders is lower than in the (${\pm}x$, ${\pm}y$) diffracted orders. To further investigate the result, we calculated the angular dependent transmission of P=2.2 um sample (Fig. 2). The incident angle varies from 30o to 70o with a 10o increment. We also found the splitting character on reflectance measurement. The splitting effect is considered a results of SPPs assisted diffraction process by oblique incidence.
Park, Man-Soo;Park, Young-Bum;Choi, Hyunmin;Moon, Hong-Seok;Chung, Moon-Kyu;Cha, In-Ho;Kim, Hee-Jin;Han, Dong-Hoo
The Journal of Advanced Prosthodontics
/
제5권4호
/
pp.494-501
/
2013
PURPOSE. The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. MATERIALS AND METHODS. The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. RESULTS. The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. CONCLUSION. In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.
Purpose: Platelet derived growth factor(PDGF)-BB and bone morphogenetic protein(BMP)-2 are well-known representative growth factors. The purposes of this study were to investigate the effect of rhPDGFBB and rhBMP-2 on osseointegration of titanium implants at periimplant bone defects grafted with hydroxyapatite and to evaluate the feasibility of imaging bone structures around screw-type titanium implant with micro-CT. Materials and Methods: The first molar and all premolars in the mandible region of four beagle dogs were extracted. Following a healing period of 4 months, three $8{\times}8{\times}6mm$-sized bony defects were formed and screw-type titanium implants were placed with hydroxyapatite(HA) block and growth factors; Control group, PDGF group and BMP group. Two months post-implantation, the mandible was harvested. Bone volume(BV), bone-to-implant contact(BIC) and bone mineral density(BMD) were analyzed with micro-CT and histology. Results: According to micro-CT analysis, BV and BMD measures of PDGF and BMP group were significantly higher than control group(BV; PDGF group: $p{\fallingdotseq}0.011$, BMP group: $p{\fallingdotseq}0.006$/BMD; PDGF group: $p{\fallingdotseq}0.020$, BMP group: $p{\fallingdotseq}0.011$) and BIC measures of BMP group were significantly higher than PDGF group($p{\fallingdotseq}0.015$). In histologic evaluation, BIC measures of BMP group was significantly higher than PDGF group($p{\fallingdotseq}0.048$). The values of BV in histologic sections were higher than in micro-CT images and the values of BIC in micro-CT images were higher than in histologic sections. Conclusion: The findings of this experimental study indicates that the use of rhPDGF-BB and rhBMP-2 can increase new bone formation in a large bony defect around titanium implant, and rhBMP-2 is more effective than rhPDGF-BB. Micro-CT can be considered useful for assessment as a rapid and nondestructive method for 3-dimensional measurement of bone healing around implants. Further study is necessary, however, to remove metal artifacts around titanium implant and to standardize the method.
본 연구에서는 복잡한 유동형태를 지닌 충돌분사류에 대한 유동특성을 연구하 기 위하여 단순화된 실험모델로써 형상이 동일한 두 원형분류의 충돌에 의한 충돌분류 의 혼합현상 및 유동구조 등을 질량유량비의 변화에 따라 유체역학적으로 구명하고자 하였으며, 본 연구 결과는 연소기관에서의 연소효율 증대 및 구조개선등의 공학적 응 용을 위한 기본자료로 활용하고, 이론적 연구에 의한 난류의 유동구조 및 유동특성 에 대한 타당성 입증과 이론적 모델의 보완을 위한 실험자료로 이용하고자 한다. 충돌유동에 영향을 미치는 주요인자는 노즐직경, 충돌각, 충돌질량유량비, 온도, 밀도 등이며, 이 인자들 중에서 충돌질량유량비와 출돌각이 충돌후 형성되는 난류혼합유동 에 지배적인 영향을 미치므로, 본 연구에서는 두 원형분류의 충돌질량유량비를 가변할 수 있는 장치를 고안하였으며, 두 분류의 충돌각을 45˚로 고정하고, 고속측과 저속측 노즐의 질량유량비를 1.0, 0.8, 0.6, 0.4로 설정하여 질량유량비에 따른 혼합 유동구 조의 구명을 위한 실험적인 연구를 수행하였다. 충돌후의 혼합유동의 특성을 연구하 기 위하여 유동중심궤적, 유동반폭, 유동단면, 2차원 및 3차원 유동장, 평균속도분포 등을 온라인 컴퓨터시스템을 이용하여 측정분석하였다.
영상측정기법을 적용하여 경제적이고 효율적인 유속 측정 방법에 대하여 많은 연구들이 진행되어 왔다. 현재 이동식 LSPIV 시스템은 실험실의 수리모형실험과 현장의 국부적인 유속측정에 효율적으로 이용되고 있지만, 고정식 LSPIV 시스템의 적용에는 많은 문제점들이 있어서 현장 적용이 미루어져왔다. 고정식 LSPIV 시스템은 수문분석에 많이 의존하고 있는 현재의 홍수량 산정에 좀 더 정확한 유속과 수위를 동시에 고려할 수 있는 하천유량측정 시스템이다. 이는 과거 하천유량측정 시 많은 비용과 인력 그리고 위험성들을 대폭 줄일 수 있는 현장 모니터링 시스템의 구축을 가능하게 해줄 수 있다. 본 연구에서는 LSPIV (Large Scale Particle Image Velocimetry) 시스템을 탄천(대곡교)에 설치하여 연속적으로 유량 측정을 하였다. 탄천(대곡교)에 적용된 고정식 LSPIV 시스템은 유속측정을 위한 디지털 카메라 2대와 컴퓨터 그리고 수위 측정을 위한 DCU1104 초음파 수위계로 구성된다. 위의 현장 장비들에서 들어온 실시간 영상과 수위자료는 CDMA 무선통신을 이용하여 서버컴퓨터로 들어와서 인터넷에서 손쉽게 받아 볼 수 있다. 이와 같이 실시간으로 들어온 입력 자료는 LSPIV 프로그램을 이용하여 언제 어디에서나 비교적 정확한 유량을 산정할 수 있다. 또한 실시간으로 들어오는 하천 영상을 통해 실시간 현장 모니터링도 가능하게 되고 시간적으로 연속적인 영상을 얻을 수 있기 때문에 하천 유량 변화를 쉽게 알 수 있다. 따라서 과거 현장에서 어렵게 측정하여 얻을 수 있던 유속자료를 간단한 실시간 영상 분석만으로 구할 수 있으므로 앞으로 유량조사에 유용하게 활용될 수 있을 것이다. 입체 영상) 입체영상은 영화에서 시작되었으나, 20c후반기에 들어서면서 애니메이션 분야와 모바일, 광고 패널, 텔레비전등의 매체를 이용한 입체 영상의 개발로 인하여 특정 분야에 한정 시킬 수 없으므로 영상으로 칭한다. 입체 영상은 21c에 들어서면서 영상매체의 한 분야로 급부상하고 있다. 1900년 무렵부터 연구된 입체영화(3-Dimensional motion Picture)는 In여 년이 지난 지금 대중화를 눈앞에 두고 있다. 국내에서는 놀이 동산이나 박물관등에서 흔히 볼 수 있다. 하지만 앞으로는 HDW등의 대중화로 화질의 발전을 이룬 텔레비전 분야 등에서 실용화 될 전망이다. 국제적인 흐름과 함께 국내에서도 입체 영화에 대한 연구가 활성화 되어 영상산업의 한 주류로서 대두되고 있다. 이러한 상황에서 입체영상에 대한 이해와 콘텐츠(Contents)의 개발은 기술적인 진보에 발맞추어 준비되어야 한다. 본 논문은 이러한 기술적인 계보에 발맞춘 영상 콘텐츠 개발에 박차를 가하고자 앞으로의 발전분야에 대한 기술적인 면과 기법적인 면을 제시하여 기술만 앞서고 내용은 수입하는 수입국이기 보다는 미리 준비하여 비전문가나 타국의 기술에 선점 당하지 않는 분야로 성장할 수 있는 진보적인 영상 인들의 관심과 지속적인 연구를 독려하고자 한다.시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.