• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.120-127
• /
• 2015

Mild Cognitive Impairment(MCI) is a prior step to Alzheimer's Disease(AD). It is different from AD which is seriously affecting daily life. Particularly, the hippocampus could be charged a crucial function for forming memory. MCI has a high risk about progress to AD. Our investigated research for a relationship between hippocampus and AD has been studied. The measurement of hippocampus volumetric is one of the most commonly used method. The three dimensional reconstructed medical images could be passible to interpret and its examination in various aspects but the cost of brain research with the medical equipment is very high. In this study, 3D visualization was performed from a series of brain Magnetic Resonance Images(MRI) and we have designed and implemented a competitive software tool based on the open libraries of Visualization ToolKit(VTK). Consequently, our visualization software tool could be useful to various medical fields and specially prognosis and diagnosis for MCI patients.

• Journal of applied mathematics & informatics
• /
• v.27 no.3_4
• /
• pp.703-714
• /
• 2009

GPS is especially suitable for location systems in flat areas, but the availability of GPS is limited in highly urbanized and mountain areas, due to the nature of satellite communications. Dead reckoning is generally used to solve a location problem when a pedestrian is out of range of GPS coverage. To extend the apparent coverage of the GPS system for a hiker in mountain areas, we propose an integrated 3D location system that interpolates a 3D dead reckoning system based on information about contour lines. The speeds of hikers vary according to the inclination of the ground in sloped areas such as mountains. To reduce location measurement errors, we determine the angle of inclination based on the contour lines of the mountain, and use the speeds based on the inclination in the location system. The simulation results show that the proposed system is more accurate than the existing location system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.491-491
• /
• 2013

A novel plasma system has been developed for 3-dimensional modification of the carbon nano-powders. Improvement of dispersion of these nano materials are studied by plasma discharge, not using chemical modification. The plasma process is considered to great advantages over wet chemical process due to environmental, economic viewpoint, and uniformity over the treated volume. The uniform dispersion is a critical factor for these material's nano composite applications. Using this plasma system, graphene, carbon black, and CNT was treated and functionalized. Several key discharge conditions such as Ar/H2/O2 or Ar/H2/NH3 gas ratio, treatment time, power, feeder's vibration frequency are investigated. Hydrophobic of graphene has turned some more into hydrophilic by reaction test with water, electrophoresis, surface contact angle test, and turbidity analysis. The oxygen content ratio in the plasma treated CNT has increased about 3.7 times than the untreatedone. In the case of graphene and carbon black, the oxygen- and nitrogen- content has been enhanced average 10%. O-H (N-H) peak, C-O (C-N) peak, and C=O (C=N) peak data have been detected by FTIR measurement and intensified compared to before-plasma treatment due to O2 or NH3 content.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.41-48
• /
• 2019

This paper deals with a method of aligning an aircraft fuselage and an inertial navigation sensor using three-dimensional coordinates obtained by an optical method. In order to verify the feasibility, we introduce the method to accurately align the coordinate system of the inertial navigation sensor and the aircraft reference coordinate system. It is verified through simulation that reflects the error level of the measuring device. In addition, optimization method based alignment algorithm is proposed for connection between optical sensor and inertial navigation sensor.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.189-196
• /
• 2021

In this paper, we propose techniques to correct the altitude error and heading error of 3D Pedestrian Inertial Navigation (PIN). When a PIN is used to estimate the location of a pedestrian only with an Inetrial Measurement Unit (IMU) without infrastructure, there is a problem in that the location error gradually increases due to the limitation of the observability of the filter. To solve this problem without additional sensors, we propose two techniques in this paper. First, stair walking is recognized in consideration of the altitude difference that may occur during one step. If it is recognized as stair walking, only Zero-velocity UPdaTe (ZUPT) is performed, and if it is recognized as level walking, ZUPT + Altitude Damping (AD) is performed together to correct the altitude error. Second, the straight-line movement direction is calculated through the difference of the estimated position, and the heading error is corrected by matching this information with the link information of the digital map. By applying these techniques, it is verified through real tests that accurate three-dimensional location information of pedestrians can be estimated without infrastructure.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.519-525
• /
• 2024

In this paper, a study on the physical properties of mortar applying 3D Textile was conducted to compensate for the shortcomings of the existing concrete surface repair and reinforcement method. In the tests conducted to analyze the physical properties, compressive strength, flexural strength, and dynamic modulus measurement tests were conducted. As a result of the compressive strength test, as the number of surfaces to which the stereoscopic fiber was applied increased, the amount of displacement and strength reduction rate increased, and the flexural strength also increased as the number of surfaces to which the stereoscopic fiber was applied increased. In addition, it was confirmed that the use of stereoscopic fibers tended to decrease the dynamic modulus of elasticity. This result is a characteristic of the application of stereoscopic fibers, and it caused a decrease in compressive strength due to a decrease in the mortar content of the part to which the stereoscopic fib er was applied, and the high tensile force of the stereoscopic fiber is believed to have affected the increase in flexural strength.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.94-106
• /
• 2012

In recent years, the risks and uncertainties associated with mixed used development in urban regeneration projects which have actively been implemented at home and abroad have been on the rise due to the uncertainties of the initial business plan, difficulty of financing, increase in total cost and schedule delay. To cope with rapid social and economic changes and optimize benefits, a risk-based configuration management process that considers life cycle is required, along with accurate planning in the early stage of the business. In addition, it is necessary to prepare measures that can respond to the evaluation and measurement of the configuration factors in relation to the business process. However, the focus of previous studies on configuration management in the field of construction was mainly on humanities and the sociological aspects such as organization, leadership, ideology and similar concepts. There has been limited research on the process and measurement and evaluation methods for configuration factors required in decision-making on the risks and changes that can occur in the actual project implementation phase. Accordingly, in this study, we defined risk-based configuration factors and developed a process and MECA/3DAM/CII methodology to measure and evaluate these factors so as to carry out systematic configuration management of mixed used development in urban regeneration projects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1029-1038
• /
• 2008

In this paper, we propose a method for an arbitrary-view image generation in multi-view video and methods for pre- and post-processing to compensate unattended regions in the generated image. To generate an arbitrary-view image, camera geometry is used. Three dimensional coordinates of image pixels can be obtained by using depth information of multi-view video and parameter information of multi-view cameras, and by replacing three dimensional coordinates on a two dimensional image plane of other view, arbitrary-view image can be reconstructed. However, the generated arbitrary-view image contains many unattended regions. In this paper, we also proposed a method for compensating these regions considering temporal redundancy and spatial direction of an image and an error of acquired multi-view image and depth information. Test results show that we could obtain a reliably synthesized view-image with objective measurement of PSNR more than 30dB and subjective estimation of DSCQS(double stimulus continuous quality scale method) more than 3.5 point.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.57-64
• /
• 2010

Measurements of deflection in load testing of structures are typically obtained with contact instrumentations such as LVDT (Linear-Variable Differential Transformer). LVDT only measure 1-dimensional deformation and in destructive testing is damage to instrumentation, thus prohibiting deflection when the beam is close to failure. Measurements of deflection using non-metric digital cameras are useful for load testing because there are very little cost or beam failure except for cheap targets and measurements in 3-dimensional deflection can obtained rapidly. In this research, deflection of concrete beam was measured using Nikon D80 DSLR camera, and the accuracy was evaluated with comparing the outputs to the LVDT measurements. The results show that the accuracy of terrestrial photogrammetric measurements are ${\pm}$0.5mm, ${\pm}$0.5mm, ${\pm}$0.6mm for each X, Y, Z directions, and the RMSE of comparison to LVDT is ${\pm}$0.57mm.

• Archives of Plastic Surgery
• /
• v.41 no.2
• /
• pp.163-170
• /
• 2014

Background The septal cartilage is the most useful donor site for autologous cartilage graft material in rhinoplasty. For successful nasal surgery, it is necessary to understand the developmental process of the nasal septum and to predict the amount of harvestable septal cartilage before surgery. Methods One hundred twenty-three Korean patients who underwent three-dimensional (3D) facial bone computed tomography (CT) were selected for evaluation of the midsagittal view of the nasal septum. Multiple parameters such as the area of each component of the nasal septum and the amount of harvestable septal cartilage were measured using Digimizer software. Results The area of the total nasal septum showed rapid growth until the teenage years, but thereafter no significant change throughout the lifetime. However, the development of the septal cartilage showed a gradual decline due to ossification changes with aging after puberty in spite of a lack of change in the total septal area. The area of harvestable septal cartilage in young adults was $549.84{\pm}151.26mm^2$ and decreased thereafter with age. Conclusions A 3D facial bone CT scan can provide valuable information on the septal cartilage graft before rhinoplasty. Considering the developmental process of the septal cartilage identified in this study, septal surgery should not be performed until puberty due to the risk of nasal growth impairment. Furthermore, in elderly patients who show a decreased cartilage area due to ossification changes, septal cartilage harvesting should be performed carefully due to the risk of saddle nose deformity.