• Advances in pediatric surgery
• /
• v.3 no.1
• /
• pp.71-76
• /
• 1997

A 3-year-old boy with a Wilms' tumor had unusually severe hypertension, polydipsia, polyuria and hypokalemia. Physical examination on admission was unremarkable except for the presence of a smooth, firm mass in the right abdomen. Computerized tomography showed a tumor occupying the upper two thirds of the right kidney. Plasma renin activity and aldosterone concentration were markedly elevated, 37.7 mg/ml/hour(normal in supine position 0.15-2.33 mg/ml/hour) and 120.1 ng/dL(normal in supine position 1 to 16 ng/dL), respectively. Hypertension varied from 150/90 mmHg to 240/180 mmHg, and was not effectively controlled by antihypertensive drugs. Right nephrectomy was performed on the sixth hospital day. At laparatomy, there was no evidence of mechenical compression of the renal artery by the tumor. The tumor, about 8 cm in diameter, was confined to the renal capsule without involvement of the renal blood vessels at the hilum. Histopathology was Wilms' tumor of favorable histology. On electron microscopy, tumor cells contained intracytoplasmic electron dense secreting graules, suggesting the possibility of renin secreting tumor cells. Shortly after nephrectomy, signs and symptoms were relieved dramatically, and plasma renin activity and aldosterone concentration were also decreased to normal.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.751-756
• /
• 2002

Since the operation of the first satellite-based navigation services, satellite positioning has played an increasing role in both surveying and navigation, and has become an indispensable tool for precise relative positioning. However, in some situations, e.g. at a low angle of elevation, the use of satellites for navigation is seriously restricted because obstacles like buildings and mountains can block signals. As a mean to resolve this problem, the quasi-zenith satellite system has been proposed as a next-generation satellite navigation system. Quasi-zenith satellite is a system which simultaneously deploys several satellites in a quasi-zenith geostationary orbit so that one of the satellites always stay close to the zenith if viewed from a specific point on the ground of East Asia. Thus, if a position measurement function compatible with GPS is installed in the quasi-zenith and stationary satellites, and these satellites are utilized together with the GPS, four satellites can be accessed simultaneously nearly all day long and a substantial improvement in position measurement, especially in metropolitan areas, can be achieved. The purpose of this paper is to evaluate the effectiveness of quasi-zenith satellite system on positioning accuracy improvement through simulation by using precise orbital information of the satellites and a three-Dimensional digital map. Through this simulation system, it is possible to calculate the number of simultaneously visible satellites and available area of the positioning without the need of actual observation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.655-661
• /
• 2019

This study examined the change in driving performance according to the starting position of the rear diffuser of a vehicle. To accomplish this, the CATIA 3D design program was used to model the vehicle with reference to a commercial SUV vehicle and design the rear diffuser to start from 300, 400, and 500 mm from the rear tire. The flow and drag change were analyzed and the change in air flow was confirmed using Fluent, a flow analysis program at a vehicle traveling speed of 60, 100, and 140 km/h. The rear diffuser reduced the lift and drag forces compared to no diffuser regardless of the starting position. This is because if there is a rear diffuser, it will reduce the vortex phenomenon by suppressing the flow separation that occurs when air is drawn out from the rear portion of the vehicle. In this study, the starting point SP 400 was determined to be the optimal condition because the lift force was the smallest at SP 400 and the lift reduction effect was the best.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.4
• /
• pp.81-88
• /
• 2018

Seismic isolation systems have typically been used in the form of base seams in mid-rise and low-rise buildings. In the case of high-rise buildings, it is difficult to apply the base isolation. In this study, the seismic response was analyzed by changing the installation position of the seismic isolation device in 3D high - rise model. To do this, we used 30-story and 40-story 3D buildings as example structures. Historic earthquakes such as Mexico (1985), Northridge (1994) and Rome Frieta (1989) were applied as earthquake loads. The installation position of the isolation device was changed from floor to floor to floor. The maximum deformation of the seismic isolation system was analyzed and the maximum interlaminar strain and maximum absolute acceleration were analyzed by comparing the LB model with seismic isolation device and the Fixed model, which is the base model without seismic isolation device. If an isolation device is installed on the lower layer, it is most effective in response reduction, but since the structure may become unstable, it is effective to apply it to an effective high-level part. Therefore, engineers must consider both structural efficiency and safety when designing a mid-level isolation system for high-rise buildings.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.965-972
• /
• 2020

Depth maps have distance information of objects. They play an important role in organizing 3D information. Color and depth images are often simultaneously obtained. However, depth images have lower resolution than color images due to limitation in hardware technology. Therefore, it is useful to upsample depth maps to have the same resolution as color images. In this paper, we propose a novel method to upsample depth map by shifting the pixel position instead of compensating pixel value. This approach moves the position of the pixel around the edge to the center of the edge, and this process is carried out in several steps to restore blurred depth map. The experimental results show that the proposed method improves both quantitative and visual quality compared to the existing methods.

• Physical Therapy Korea
• /
• v.29 no.4
• /
• pp.262-268
• /
• 2022

Background: Virtual reality (VR) programs based on motion capture camera are the most convenient and cost-effective approaches for remote rehabilitation. Assessment of physical function is critical for providing optimal VR rehabilitation training; however, direct muscle strength measurement using camera-based kinematic data is impracticable. Therefore, it is necessary to develop a method to indirectly estimate the muscle strength of users from the value obtained using a motion capture camera. Objects: The purpose of this study was to determine whether the pedaling speed converted using the VR engine from the captured foot position data in the VR environment can be used as an indirect way to evaluate knee muscle strength, and to investigate the validity and reliability of a camera-based VR program. Methods: Thirty healthy adults were included in this study. Each subject performed a 15-second maximum pedaling test in the VR and built-in speedometer modes. In the VR speedometer mode, a motion capture camera was used to detect the position of the ankle joints and automatically calculate the pedaling speed. An isokinetic dynamometer was used to assess the isometric and isokinetic peak torques of knee flexion and extension. Results: The pedaling speeds in VR and built-in speedometer modes revealed a significantly high positive correlation (r = 0.922). In addition, the intra-rater reliability of the pedaling speed in the VR speedometer mode was good (ICC [intraclass correlation coefficient] = 0.685). The results of the Pearson correlation analysis revealed a significant moderate positive correlation between the pedaling speed of the VR speedometer and the peak torque of knee isokinetic flexion (r = 0.639) and extension (r = 0.598). Conclusion: This study suggests the potential benefits of measuring the maximum pedaling speed using 3D depth camera in a VR environment as an indirect assessment of muscle strength. However, technological improvements must be followed to obtain more accurate estimation of muscle strength from the VR cycling test.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.519-521
• /
• 2022

As appearance of diverse electric power supplies and fuel cells have been emerging, UAVs have capacity to prolong their flight missions. Nowadays, the rotary based UAVs that are commonly distributed on the open market, adapt rechargeable batteries and have around 50 centimeters in width and generally within 30 minutes in hovering flight capacities. UAV's flight time highly depends on the capacity and the weight of its batteries. To cope with the flight time, recharging methods are also being researched. their researches are mainly divided into coupled and decoupled in manner. In this article, we propose the method to refine the position more effectivly and precisely adapting QR Code and 3-D position estimation so that UAVs enable to land on the recharging system successfully.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06c
• /
• pp.471-476
• /
• 2007

본 논문에서는 다중카메라를 이용한 3차원 공간 구성에 대한 분석을 위해 실제 카메라의 3차원 위치를 분석하였다. 카메라의 3차원 위치 분석을 위해서 카메라 교정법을 이용하였으며 교정 결과 얻은 카메라의 외부변수를 역좌표변환하여 카메라의 3차원 위치를 얻었다. 다중카메라 교정을 위해서 10대의 카메라를 다섯 쌍의 스테레오 카메라로 묶어 교정을 하였다. 이러한 과정을 통해 얻은 카메라의 외부변수의 역좌표변환으로 실제 카메레라의 위치를 계산하였고 이것의 정확한 3차원 위치정보를 얻기 위해 초기 교정에서 선택된 12개의 점을 기초로 하여 각 좌표의 8-방향의 좌표 결과를 얻게 된다. 이렇게 해서 얻은 좌표를 이용하여 카메라 교정 과정을 반복하였다. 그 결과 카메라의 정확한 3차원 위치를 얻었으며, 또한 마커 좌표의 변화가 카메라의 위치에 영향 정도를 분석하였다.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.1-23
• /
• 2017

3D animation production has had a pivotal position in current animation industry and the necessity of professional management tool for 3D animation production has claimed due to its sophisticated pipeline from advance of technology and global production partnership trend. Shotgun and Ftrack are providing the most appropriate management toolset for 3D animation management among the extant management tools and the efficiency of Shotgun & Ftrack is identified compared with the traditional document oriented management style. The biggest strength of production management using Shotgun is that all of the production staff can directly participate in the communication on the tools therefore they can share the information on Shotgun & Ftrack in real time without constraint of time and location. Moreover, all the process of the production and the history of the discussion on certain production issues are systematically accrue on the tool so that the production history can be easily tracked. Finally, the production management using tools contributes collecting and analysing the production information for the production management team in studios. However, Shotgun & Ftrack has metadata based retrieval method which cost huge amount of effort by human's manual annotation and it also has the limitation of accuracy. In addition, the fact that studios has to have technical professionals first in order to institute the tools into their studios is the actual difficulty of Korean studios when they want to use management tools for their project. Thus, this paper suggests adopting the content-based retrieval system on the tools and tools' expanded technical service for the studios as the solution of the identified issues.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.1 s.33
• /
• pp.44-54
• /
• 1990

The purpose of this study was to investigate the effects of thickness of the sleeping pad on the physiological responses and the microclimate in the heating ondol room during sleeping time. The measuring points were skin temp., weight loss and body movement as physiological responses and the compression ratio, the temp. on/under the sleeping pad, the inside limp. of the sleeping quilts and subjective sence while 7 hours sleeping. Thickness of sleeping pads was 27.2 mm(A), 34.8 mm (B), 47.9 mm(C) used for 90 days and no used pad 60.7 mm(D). The floor surface temp. was keeping $29{\pm}1^{\circ}C$ while the environmental conditions was at $23{\pm}1^{\circ}C$ ($50{\pm}5\%$ R.H.) The results were as followings; 1) The mean compression ratio after using the sleeping pads for 45 days was about $70\%$ , and it wasn't increased any more thereafter 2) After 2 hours sleeping the temp. under the sleeping pads was shown that C and D were higher than A and B, and the temp. on the sleeping pads was shown that A and C pads were higher than B and D. But after 3-4 hours sleeping the skin temp. of legs was shown that B and D pads were higher than A and C. 3) Weight loss for C pad was significantly higher than others. Body movement and side position in tying was higher in A and C pads than B and D. 4) The inside temp. of quilt for A and C pads were higher in the early part of sleeping period than those of B and C pads and relative humidity was lower in C than others. 5) D pad was softer than others and fatigue degree was turned out to be lowest in D, the highest in A. From this point of view, we concluded that thickness of the sleeping Pad in the heating ondol room had different characteristic from that in no heating ondol room. And 35 mm used pad was turned out to be proper.