• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.5
• /
• pp.859-864
• /
• 2013

Creation of a stress relief groove is a fairly simple yet high-performance method. During the application of this method, it is important to consider the location and size of the groove in order to achieve better performance. Consequently, this research proposes an approach for optimizing the application of the stress relief groove method to a press-fitted assembly. In a boss design, the position and diameter of the groove are configured as design variables and the design of experiments is applied. Based on this information, a 3D model is built and analyzed using the finite element analysis software ABAQUS. Meta-models are created using back-propagation neural networks. Then, deterministic optimization results obtained from a genetic algorithm are compared with the results of the finite element analysis. The temperature sensitivity of the optimized model is analyzed, and finally, reliability-based design optimization is conducted for enhancing the design quality.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_2
• /
• pp.511-520
• /
• 2013

Recently, human activities have expanded from outdoor spaces to indoor spaces since a lot of complex buildings were constructed over the world. Especially, visitors in a shopping mall would like to receive specific information of interest regarding various shopping-related activities as well as shopping itself. However, when it comes to providing the information, existing guide services have some drawbacks. Firstly, the existing services cannot provide visitors with the information of other stores simply and promptly on the current location. Secondly, the services have difficulties in representation and share of the shopping-related knowledge, and in providing inferred information. Thus, the purpose of this study is to develop a method that allows topological analysis utilizing ontology technique around the current position in such shopping mall in order to provide shopping-related information. For this, the shopping activity ontology model is designed, and based on the ontology model, inferencing rules are defined in order to extract the information of interest efficiently through semantic queries. Also, a geocoding method in indoor spaces is used regarding the current location, and optimal routing analysis, which is one of topological analysis, is applied with the result from the semantic queries. As a result, an Android application is developed for 3D visualization and user interface.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.1
• /
• pp.7-11
• /
• 2007

The study was conducted on 162 adult male Haemonchus contortus of sheep collected from Avikanagar, Jaipur and Bikaner regions to diagnose the benzimidazole (BZ) resistance in H. contortus. The BZ resistance is primarily linked with the mutation in ${\beta}$-tubulin isotype 1 gene which substitute phenylalanine (Phe) into tyrosine (Tyr) at the 200 codon of the gene. An allele specific polymerase chain reaction (AS-PCR) technique was used for diagnosis of BZ resistance in H. contortus. In AS-PCR, one reverse primer (TGG 312) was used in two separate reactions with each of 2 forward primers (resistant TGG 331 and susceptible CAW 106 primer) that differed only at 3' nucleotide position. Therefore, the amplified products from resistant and susceptible parasites were produced 267 and 266 bp, respectively. A total of 162 parasites were genotyped, of which 130 parasites found homozygous resistant 'rr', 22 heterozygous 'rS' and 10 homozygous susceptible 'SS' type. The prevalence of 'rr' individuals was higher in Jaipur (98%) followed by Avikanagar (93%) and Bikaner (50%) regions. Overall, the prevalence of BZ resistant allele (r) was higher (87%) as compared to 13% of BZ susceptible allele (S).

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.305-313
• /
• 2011

This paper proposes a method for reusing kinematic design data for virtual facilities, Making a virtual model of a facility involves two major activities: geometric design (virtual model visualization) and kinematic design that should be remodeled frequently whenever design changes occur, Conventionally, a virtual model of an automated facility focuses on the design level, which mainly deals with design verification, alternative comparison, and geometric model diagnosis, Although a design level model can be designed with the information of past models from PLM system, a simulation level model is not sufficient utilized to be reused for kinematic design purpose, We propose a method for reusing kinematic information of a past simulation model to cope with this problem, We use the concept or the 'center of mass', which is a point representing the mean position of the matter in a body or system. And we also use comparison method of a boundary box to identity which 3D objects have to be involved from the design model to a link structure that is contained in the simulation model. Because a proposed method only use not a historical approach but a geometrical approach, it is more effective to apply to the field.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.844-853
• /
• 2015

Recently, according to change of lifestyle and increase of concerning in health, needs of the smart clothing based on the vital sign monitoring have increased. Along with this trend, smart clothing for ECG monitoring has been studied various way as textile electrode, clothing design and so on. Smart clothing for ECG monitoring can become a comfortable system which enables continuous vital sign monitoring in daily use. But, smart clothing for ECG monitoring has a weakness on artifact during motion. One of the motion artifact caused by shifting of the electrode position was affected skin change by motion. The aim of this study was to suggest electrode locations for clothing of ECG monitoring to reduce of motion artifacts. Therefore, change of skin surface during the movement were measured and analyzed in order to find location to minimize motion artifacts in ECG monitoring clothing by 3D motion capture. For the experiment, the subjects consisted of 5 males and 5 females in their 20' with average physique. As a result, the optimal location for ECG monitoring was deducted under the bust line and scapula which have least motion artifact. These locations were abstracted to be least affected by movement in this research.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.2 s.245
• /
• pp.177-185
• /
• 2006

This study aims deriving analysis the flow characteristic of kitchen hood system with using 3-D numerical analysis method and improving the system to expel pollutes more efficiently. To understand the flow characteristics of four models, this study only focuses on velocity field, temperature field, and concentration field varying with followings whether separation plate is set or not and the shapes of separation plates. The quantity of air, speed of exhaust fan and temperature and concentration of heating source are concerned as constant values. The three models having different shapes have one exhaust port and the model which has the vent at the closest position to where pollutes are generated is discovered to be the most efficient model. Compare to the initial model (having no separation plate), it was $1.4-1.9\%$ more efficient at temperature distribution and $9.4-11.9\%$ more at $CO_2$ concentration distribution.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.44-51
• /
• 2009

The Characteristics of the flowfield through tube banks with in-line and staggered arrangements were investigated by PIV. Strouhal numbers, velocity vectors and velocity profiles around the cylinders with in-line and staggered arrangements were observed at the pitch ratio Pt/D=2.0 and Reynolds number of Re=$Re=4.0{\times}10^3$. As the results The flow patterns through tube banks were almost a straight line in case of the in-line arrangement while it was almost 八 type in case of the staggered arrangement in the direction of the wake. The average velocity in the rear region of the tube banks with the staggered arrangement was far smaller than that with the in-line arrangement. The Strouhal number in the last rank was far smaller than that in the front ranks in both of the in-line and staggered arrangements. The wake of each cylinder changed with time and with the position of the cylinder.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.1-6
• /
• 2008

This paper proposes a game controller that provides user motion input and tactile feedback display, in addition to the traditional button-type input. The device utilizes both an accelerometer and an infrared camera in order to estimate 3D position and to recognize user motion. The information from the accelerometer and the camera are integrated for better performance. Various tactile sensations are presented using a voice-coil type vibrator. We apply the proposed controller to a motion-based game and validate its usability.

• BMB Reports
• /
• v.42 no.11
• /
• pp.747-751
• /
• 2009

Transcriptional silencing of subtelomeric genes is associated with telomere length, which is correlated with age. Long and short telomeres in young and old people, respectively, coincide with gene repression and activation in each case. In addition, differential location of genes with respect to telomeres causes telomere position effect. There is very little evidence of the manner in which age-related telomere length affects the expression of specific human subtelomeric genes. We analyzed the relationship between telomere length and gene expression levels in fibroblasts derived from human donors at ages ranging from 0-70 years. We studied three groups of genes located between 100 and 150 kb, 200 and 250 kb, and >300 kb away from telomeres. We found that the chromatin modifier-encoding genes Eu-HMTase1, ZMYND11, and RASA3 were overexpressed in adults. Our results suggest that short telomere length-related overexpression of chromatin modifiers could underlie transcriptional changes contributing to cellular senescence.

• Journal of computational fluids engineering
• /
• v.11 no.3 s.34
• /
• pp.28-36
• /
• 2006

NSBT(No Slip Boundary Treatment) is a newly developed scheme for the treatment of a no slip condition on the solid wall of obstacle in a flow field. In our research, NSBT was used to perform LBM simulation of a flow over a circular cylinder to determine the flow feature and aerodynamics characteristic of the cylinder. To ascertain the applicability of NSBT on the complex shape of the obstacle, it was first simulated for the case of the flow over a circular and square cylinder in a channel and the results were compared against the solution of Navier-Stokes equation. The simulations were performed in a moderate range of Reynolds number at each cylinder position to identify the flow feature and aerodynamic characteristics of circular cylinder in a channel. The drag coefficients of the cylinder were calculated from the simulation results. We have numerically confirmed that the critical reynolds number for vortex shedding is in the range of 200$\sim$250. For the gap parameter $\gamma$ = 2 cases at Re > 240, the vortex shedding were symmetric and it resembled the Karmann vortex. As the cylinder approached to one wall, the vorticity significantly reduced in length while the vorticity on the other side elongated and the vorticity combined with the wall boundary-layer vorticity. The resultant $C_d$ by LBM concurred with the results of DNS simulation performed by previous researchers.