• Advances in materials Research
• /
• v.13 no.3
• /
• pp.211-220
• /
• 2024

Polylactic acid or polylactide (PLA) is a biodegradable thermoplastic that can be produced from renewable material to create various components for industrial purposes. In 3D printing technology, PLA is used due to its good mechanical, electrical, printing properties, environmentally friendly and non-toxic properties. However, the physical properties and excellent electrical insulation properties of PLA have limited its application. In this study, with the carbon black (CB) as filler added into PLA, the lattice spacing and morphology were investigated by using X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The physical properties of PLA-carbon composite were evaluated by using tensile test, shore D hardness test and density and voids measurement. Impedance test was conducted to investigate the electrical properties of PLA-Carbon composites. The results demonstrate that the inclusion of carbon black as filler enhances the physical properties of the PLA-carbon composites, including tensile properties, hardness, and density. The addition of carbon black also leads to improved electrical conductivity of the composites. Better enhancement toward the electrical properties of PLA-carbon composites is observed with 1wt% of carbon black in N774 grade. The N550 grade with 2wt% of carbon black shows better improvement in the physical properties of PLA-carbon composites, achieving 10.686 MPa in tensile testing, 43.330 in shore D hardness test, and a density of 1.200 g/cm3 in density measurement. The findings suggest that PLA-carbon composites have the potential for enhanced performance in various industrial applications, particularly in sectors requiring improved physical and electrical properties.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.367-376
• /
• 2001

For the electronic map service by wireless, the existing map database cannot be used directly. This is because, the data volume of a map is too big to transfer by wireless and although the map is transferred successfully, the devices to display the map usually don’t have enough resources as the ones for desktop computers. It is also not acceptable to construct map database for the exclusive use of wireless service because of the vast cost. We propose new technique to generate a map for wireless service dynamically, from the existing map database. This technique includes the generalization method to reduce the map data volume and filtering method to guarantee that the data volume don’t exceed the limit of bandwidth. The generalization is performed in 3 steps :ㅁ step of merging the layers, a step of reducing the size of spatial objects, and a step of processing user interface. The filtering is performed by 2 module, counter and selector module. The counter module checks whether the data blume of generated map by generalization, exceeds the bandwidth limit. The selector module eliminates the excess objects and selects the rest, on the basis of distance.

• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.3-4
• /
• 2017

일련의 캐릭터를 표현할 경우 대상의 외형은 물론 질감표현 역시 중요한 요소이다. 3D 프린터의 보편화로 외형 표현은 비교적 쉽게 이루어질 수 있으나 질감표현은 여러 한계로 인해 표현이 어렵다. 본 연구는 2D 이미지 기반의 UV 맵 및 관련 입체화 기능을 활용해 3D 프린팅에 적용 가능한 재질표현 과정을 기술한다. 사실적 재질 표현을 위해 3D 모델의 UV 맵과 그 위에 여러 물성의 재질을 부착 후 정합하여 그 결과의 효과도 논의하고자 한다.

• Spatial Information Research
• /
• v.20 no.5
• /
• pp.15-24
• /
• 2012

The purpose of this study was to establish an analytical framework and quantitative methodologies to analyze 'the cognitive effects of web map use' and to empirically test it. This experimental design was established based on the literature about spatial cognition. Accuracy, reaction time, and confidence within each participant were compared to measure the cognitive effects of web map use for wayfinding. Geometric accuracy of the cognitive maps was estimated and calculated based on the bidimensional regression. The experimental results showed that characteristics of map users and repetition of map use rather than types of map representation did significantly affect accuracy and reaction time of spatial cognition by using web maps. And confidence appeared to be low when the participants referred to both 2D and 3D maps for wayfinding tasks on the web maps. Understanding spatial cognition of web map users, which was suggested in the study, will help cartographers make more effectively-communicated maps.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.1
• /
• pp.11-16
• /
• 2020

3D printing is one of the emerging technologies and getting a lot of attention. To do 3D printing, 3D model is first generated, and then converted to G-code which is 3D printer's operations. Facet, which is a small triangle, represents a small surface of 3D model. Depending on the height or precision of the 3D model, the number of facets becomes very large and so the conversion time from 3D model to G-code takes longer. Apach Hadoop is a software framework to support distributed processing for large data set and its application range gets widening. In this paper, Hadoop is used to do the conversion works time-efficient way. 2-phase distributed algorithm is developed first. In the algorithm, all facets are sorted according to its lowest Z-value, divided into N parts, and converted on several nodes independently. The algorithm is implemented in four steps; preprocessing - Map - Shuffling - Reduce of Hadoop. Finally, to show the performance evaluation, Hadoop systems are set up and converts testing 3D model while changing the height or precision.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.355-359
• /
• 1999

This paper presents a method for determining machining parameters in electrical discharge machining process (EDM) based on discharge area. The parameters are the peak value of currents, the pulse-on time, and the pulse-off time, on which the EDM performance depends chiefly. The optimal machining parameters are closely related on discharge area, which can be calculated from a tool electrode and a discharge height. In the paper the discharge area is obtained from NC code for machining the tool electrode instead of its geometric model. The method consists of following three steps. First a Z-Map model is constructed from the NC code. Secondly, the discharge area is obtained from the Z-Map model and a Z-height. Finally, the machining parameters are calculated from the discharge area. An introduced example shows that the machining parameters are calculated by the using a Z-map model obtained from the machining data for a tool electrode.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.239-244
• /
• 2010

This paper is to present map building of mobile robot using RFID (Radio Frequency Identification) technology and ultrasonic sensor. For mobile robot to perform map building, the mobile robot needs its localization and accurate driving in space. In this reason, firstly, kinematic modeling of mobile robot under non-holonomic constrains is introduced. Secondly, based on this modeling, a tracking controller is designed for tracking a given path based on backstepping method using Lyapunov function. The Lyapunov function is also introduced for proving the stability of the designed tracking controller. Thirdly, 2D map building is performed by RFID system, mobile robot system and ultrasonic sensors. The RFID mobile robot system is composed of DC motor, encoder, ultra sonic sensor, digital compass, RFID receiver and RFID antenna. Finally, the path tracking simulation results and map building experimental results are presented to show the effectiveness of the designed controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.115-121
• /
• 1996

Recently, the Z-Map model has been used widely to represent the three dimensional geometric shape and to achieve the cross-section and point evaluation of the shape. In this paper, the CNC cutting planning and simulation modules for product with three dimensional geometric shape are realized based on the Z-Map model. The realized system has the various capabilities related to the automatic generation of tool path for the rough and finish cutting processes, the automatic elimination of overcut, the automatic generation of CNC program for a machining center and the cutting simulation. Especially, the overcut-free tool path is obtained by using the CL Z-Map models which are composed of the offset surfaces of the geometric shape of product.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.201-208
• /
• 2015

3D image must have depth image for depth information in order for 3D realistic media broadcasting. We used generally belief propagation algorithm to solve probability model. Belief propagation algorithm is operated by message passing between nodes corresponding to each pixel. The high resolution image will be able to precisely represent but that required much computational complexity for 3D representation. We proposed fast stereo matching algorithm using belief propagation with multi-resolution based wavelet or lifting. This method can be shown efficiently computational time at much iterations for accurate disparity map.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.723-730
• /
• 2010

Recently, diverse 3D image processing technologies have been applied in industries. Among them, stereoscopic conversion is a technology to generate a stereoscopic image from a conventional 2D image. The technology can be applied to movie and broadcasting contents and the viewer can watch 3D stereoscopic contents. Further the stereoscopic conversion is required to be applied to other fields. Following such trend, the aim of this paper is to apply the stereoscopic conversion to medical fields. The medical images can deliver more detailed 3D information with a stereoscopic image compared with a 2D plane image. This paper presents a novel methodology for converting a 2D medical image into a 3D stereoscopic image. For this, mean shift segmentation, edge detection, intensity analysis, etc are utilized to generate a final depth map. From an image and the depth map, left and right images are constructed. In the experiment, the proposed method is performed on a medical image such as CT (Computed Tomograpy). The stereoscopic image displayed on a 3D monitor shows a satisfactory performance.