• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.485-500
• /
• 2023

The non-linear static analysis of reinforced concrete (RC) structures using the three-dimensional (3D) finite element method is a time-consuming and challenging task. Moreover, this type of analysis encounters numerical problems such as the lack of convergence of results in the stages of growth and propagation of cracks in the structure. The time integration analysis along with the mass scaling (MS) technique is usually used to overcome these limitations. Despite the use of this method in the 3D finite element analysis of RC structures, a comprehensive study has not been conducted so far to assess the effects of the MS method on the accuracy of results. This study aims to evaluate the accuracy of the MS method in the non-linear quasi-static finite element analysis of RC structures. To this aim, different types of RC structures were simulated using the finite element approach based on the implicit time integration method and the mass scaling technique. The influences of effective parameters of the MS method (i.e., the allowable values of increase in the mass of the RC structure, the relationship between the duration of the applied load and fundamental vibration period of the RC structure, and the pattern of applied loads) on the accuracy of the simulated results were investigated. The accuracy of numerical simulation results has been evaluated through comparison with existing experimental data. The results of this study show that the achievement of accurate structural responses in the implicit time integration analyses using the MS method involves the appropriate selection of the effective parameters of the MS method.

• 한국측량학회지
• /
• 제39권5호
• /
• pp.297-311
• /
• 2021

Around the world, there is an increasing interest in Digital Twin cities. Although geospatial data is critical for building a digital twin city, currently-established spatial data cannot be used directly for its implementation. Integration of geospatial data is vital in order to construct and simulate the virtual space. Existing studies for data integration have focused on data transformation. The conversion method is fundamental and convenient, but the information loss during this process remains a limitation. With this, standardization of the data model is an approach to solve the integration problem while hurdling conversion limitations. However, the standardization within indoor space data models is still insufficient compared to 3D building and city models. Therefore, in this study, we present a comparative analysis of data models commonly used in indoor space modeling as a basis for establishing a generic indoor space feature model. By comparing five models of IFC (Industry Foundation Classes), CityGML (City Geographic Markup Language), AIIM (ArcGIS Indoors Information Model), IMDF (Indoor Mapping Data Format), and OmniClass, we identify essential elements for modeling indoor space and the feature classes commonly included in the models. The proposed generic model can serve as a basis for developing further indoor feature models through specifying minimum required structure and feature classes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.11-17
• /
• 2000

,An residual stress and out-of plane deformation produced by butt welding was analyzed by four kinds of 3D-FEM programs(Thermal El-P1 Analysis) developed by authors. The magnitude of deformation of perpendicular to the welding line generated by butt welding was large when the reduced integration method was used. This was because of removal of the locking phenomenon, which it was generally known that the stiffness of the shear component of out-of-plane was largely evaluated. And the magnitude of residual stress was analyzed by using the FEM program based on a large and small deformation theory was similar to that was analyzed by the redeced integration method.

• 한국CDE학회논문집
• /
• 제12권2호
• /
• pp.137-145
• /
• 2007

This paper concerns about residential environment analysis program implementation for design and analysis on public housing complexes such that view and daylight analysis processes are automated and integrated into existing design routine to achieve better design efficiency. Considering the architectural design trends this paper chooses ArchiCAD as a platform for a CAD system, which contains the concepts such as integrated object-oriented CAD, virtual building and BIM. Residential environment analysis system consists of three components. The first component is the 3D modeling part defining 3D form information for external geographic contour models, site models and interior/exterior of apartment buildings. The second is the parametric library part handling the design parameters for view and daylight analysis. The last is the user interface for the input/output and integration of data for the environment analysis. Daylight analysis shows rendered images as well as results of daylight reports and grades per time and performs the calculations for floor shadow. It separates the site-only analysis from the analysis of site and exterior environmental parameters. View analysis considers horizontal and vertical view angles to produce view image from each unit and uses the bitmap analysis method to determine opening ratio, scenery ratio and void ratio. We could expect better performance and precision from this residential environment analysis system than the existing 2D drawing based view and daylight analysis methods and overcome the existing one-way flow of design information from 3D form to analysis reports so that site design modifications are automatically reflected on analysis results. Each part is developed in a module so that further integration and extension into other related estimation and construction management systems are made possible.

• 한국항공우주학회지
• /
• 제44권9호
• /
• pp.825-832
• /
• 2016

본 논문에서는 항공전자시스템 통합시험에 사용하기 위한 데이터 버스 분석 장비 개발에 대해 기술하였다. 본 데이터 버스 분석 장비는 다양한 인터페이스를 수용할 수 있도록 대부분의 항공전자시스템에 채택되고 있는 MIL-STD-1553B, CAN(Controller Area Network), Ethernet 인터페이스 카드를 갖추었다. 버스 데이터의 수집과 분석을 동시에 효율적으로 수행하기 위해 수집 엔진과 분석 엔진은 각각의 하드웨어를 가진다. 데이터 분석 효율성을 높이기 위해 Grid, 2D 및 3D 형태의 데이터 전시 기능을 제공한다. 데이터 버스 분석 장비의 검증은 시험 절차서에 입각하여 모듈 단위 테스트 및 모듈 간 통합 테스트를 수행하였다. 실제 시험 환경인 비행체 SIL(System Integration Laboratory) 환경에서 수행된 통합시험 결과를 통해 연동 요구도 검증 및 개발된 장비의 유용성을 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.720-725
• /
• 2010

In AGPS method, user position can be obtained even in the shadow region by improving signal sensitivity. A hybrid long integration scheme employing both coherent and non-coherent integration method is commonly used in AGPS receivers. Because coherent loss increases as residual frequency become large, residual frequency should be minimized to maximize coherent integration gain. This paper presents performance analysis of residual frequency estimator using FFT in fine-time assistance AGPS method. Considering the hardware complexity and the estimation accuracy, optimal length of FFT is proposed for GPS L1 C/A signal. Signal sensitivity for estimating the residual frequency is also analysed. By field experimental results, it is found that the residual frequency can be successfully estimated using 1 second snap-shot data when GPS signal strength is larger than -150 dBm and its RMS error is 3Hz.

• Journal of Astronomy and Space Sciences
• /
• 제19권4호
• /
• pp.351-366
• /
• 2002

본 연구에서는 저가의 INS와 GPS 정보를 합성하여 고기동 환경에서 항체의 위치와 자세정보를 연속적으로 제공할 수 있는 약결합 방식의 통합 알고리즘을 구현하였고, 4S-Van에 장착된 이미지 센서의 위치와 자세결정 방법에 사용하였다. (D)GPS/INS 통합을 실시하기 전 IMU의 초기 정렬과정에서 방위각은 두 대의 GPS를 통해 결정하였으며 칼만 필터를 이용한 정밀정렬을 수행하였다. 통합 알고리즘의 성능평가를 위해 차량 테스트와 시뮬레이션 테스트를 병행하였다. 통합 결과 차량 시험을 기준으로 나타난 위치 오차는 직선도로에서 l0cm 내외의 정확도를 보이며 자세오차의 경우 시뮬레이션을 기준으로 롤각은 $0^{\circ}.01$, 피치각은 $0^{\circ}.03$, 요각은 $0^{\circ}.1$ 내외의 정확도를 보였다. 구현된 (D)GPS/INS 알고리즘은 기하보정 방법을 통해 이미지센서의 위치와 자세정보 제공자로서 활용될 수 있다. 따라서 4S-Van에 장착된 이미지 센서의 영상획득 시각에 대한 기하학적인 정보를 통해 지상의 건물이나 도로 시설물 등에 대한 3차원 공간 자료 구축이 가능하다고 보며, 구축된 정보를 통해 기존의 수치지도 갱신, 도로 시설물 관리, 비디오 GIS 데이터 베이스 구축 등에 대한 공간 자료 연계 및 응용에 활용할 계획이다.

• 전자공학회논문지
• /
• 제53권7호
• /
• pp.131-137
• /
• 2016

본 논문에서는 기존의 2D IC의 성능을 개선하고 3D IC의 집적도와 전기적인 특성을 개선하기 위한 목적으로 연구되고 있는 TSV (Through Silicon Via)의 임피던스를 해석하였다. 향후 Full-chip 3D IC 시스템 설계에서 TSV는 매우 중요한 기술이며, 높은 집적도와 광대역폭 시스템 설계를 위해서 TSV에 대한 전기적인 특성에 관한 연구가 매우 중요하다. 따라서 본 연구에서는 Full-chip 3D IC를 설계하기 위한 목적으로 다중 TSV-to-TSV에서 거리와 주파수에 따른 TSV의 임피던스 영향을 해석하였다. 또한 이 연구 결과는 Full-chip 3D IC를 제조하기 위한 반도체 공정과 설계 툴에 적용할 수 있다.

• 경영과학
• /
• 제25권3호
• /
• pp.13-26
• /
• 2008

We investigate the effect of government and public sector R&D Investment at IT Industry on the amount of Production, export and nongovernment R&D Investment at IT Industry. We, firstly, examine the stationarity of each variable by the unit root t-test and perform the co-integration test for the pairs of variables. We use YECM(Vector Error Correction Model) according to the results of co-integration test for the examination of Granger-causality between variables. It is found that there exist an Granger-causality between public sector R&D Investment and nongovernment R&D investment and also between public sector R&D Investment and export. Secondly, we analyze the impulse response of government and public sector R&D Investment at IT Industry on the amount of production, export and nongovernment R&D investment at IT Industry based on VECM model. It is found that the response of the amount of production is highest at 3th period and is lowest at 8th period and that of export shows similar pattern.

• STI Policy Review
• /
• 제3권2호
• /
• pp.111-129
• /
• 2012

The integration of products and services is being expanded in both manufacturing and service companies such as in Apple's iPod & iTunes, Amazon's Kindle, and Hyundai Motor Company's Mozen. This phenomenon has recently accelerated due to multiple factors including market change, lessening of differences in quality of products or services, the paradigm of participation and sharing, and deindustrialization and evolution toward becoming a service economy. The objective of this paper is to investigate and analyze the status and characteristics of integration of products and services in Korean firms and to suggest policy directions promoting this integration. Towards this purpose, income statements from the Korea Listed Companies Association (KLCA) database of companies listed on the Korea Stock Exchange are analyzed regarding the servitization of manufacturing firms as well as the productization of service firms. In addition, this research investigates the Korean Innovation Survey 2011 database for the service sector and 2010 database for the manufacturing sector in order to evaluate R&D activity in each. In the manufacturing sector, the average ratio of service sales (servitization) was low at 0.208, with bias in the level and distribution of ratios associated with the manufacturing sector. 18 out of a total of 23 sectors (78%) have low servitization, showing there's a long way to go for servitization in the Korean manufacturing sector. In the service sector, the average ratio of product sales (productization) was 9.53%, which is relatively high compared to that of the manufacturing sector. However, the distribution of ratios is also biased, as with the manufacturing sector. Based on this analysis, policy directions are proposed in terms of 1) R&D, 2) concept boost, 3) R&D result spread, 4) statistics, 5) infrastructure and 6) green growth.