• 한국수자원학회논문집
• /
• 제45권3호
• /
• pp.331-347
• /
• 2012

남강댐 하류는 부산 경남의 수자원 장기 계획에 중요한 지역이므로 지속가능한 지표수 관리 및 오염원 제어를 위해 흐름 및 수질 해석이 필요하다. 따라서 본 연구에서는 2차원 수질모형인 RAM4와 3차원 수질모형인 WASP을 각각 수리모형인 RAM2 및 EFDC모형과 연계하여 2 3차원 준연계 모형을 이용한 남강댐 하류에서의 수리 및 수질을 해석하였다. 2차원 흐름해석 모형인 RAM2 적용 결과 만곡부 5개 횡단 측선에서의 유속의 증감경향이 ADCP 실측값과 잘 일치하였으며, 3차원 모형인 EFDC와 유속 분포 및 보 월류 유속이 유사하였다. 또한 정상상태 도달 후의 RAM2-RAM4 연계모의에 의한 BOD 농도와 EFDC-WASP 연계모의에 의한 BOD 농도장이 모의영역 전반에 걸쳐 유사하게 나타났다. 남강댐 하류부의 경우 수리 및 수질이 남강댐 방류량에 크게 좌우되며 남강댐의 수량은 하류부의 수질 및 연안 어업환경에 큰 영향을 미치므로 향후 이에 대한 정량적 분석 시 계산의 효율성 및 모형의 적용성 측면에서 2차원 준연계 모형을 적용하는 것이 바람직한 것으로 판단된다.

• 한국농공학회논문집
• /
• 제62권3호
• /
• pp.95-107
• /
• 2020

The failures of the agricultural reservoirs that most have more than 50 years, have increased due to the abnormal weather and localized heavy rains. There are many studies on the prediction of damage from reservoir collapse, however, these referenced studies focused on evaluating reservoir collapse as single unit and applyed to one and two dimensional hydrodynamic model to identify the fluid flow. This study is to estimate failure probability of spillway, sliding, bearing capacity and overflowing targeting small and medium scale agricultural reservoirs. In addition, we calculate failure probability by complex mode. Moreover, we predict downstream flood damage by reservoir failure applying three dimensional hydrodynamic model. When the reservoir destroyed, the results are as follows; (1) the flow of fluid proceeds to same stream direction and to a lower slope by potential and kinetic energy; (2) The predicted damage in downstream is evaluated that damage due to building destruction is the highest.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3275-3284
• /
• 2012

본 논문은 국내 농업용저수지의 성층현상을 방지하고자 물순환장치를 설치하였을 때, 3차원 수리해석모델인 EFDC를 이용하여 부유물질 이송확산모의를 하였다. 이를 통해 물순환장치의 이송확산범위를 예측하고, 다양한 운전인자를 조절함으로써 최적의 운전인자를 도출하여 물순환으로 인한 내부변화의 영향을 최소화하고자 하였다. 3차원 이송확산모의 결과에 의하면, 30일 이후에 전 수층에 걸쳐 물순환이 시작되며, 100일 이후 저수지의 전체순환이 가능한 것으로 모의되었다. 또한, 연속운전보다 간헐운전이 저수지 전 구간에서 이송확산농도가 낮게 나타났으며, 안정적으로 전체순환이 일어났다. 물순환장치의 표층과 저층 혼합비율은 표층 혼합율이 높을수록 저수지 영향을 감소시킬 수 있으며, 3:1 동일조건일 경우, Case 8(50일운전:50일정지) 조건이 저수지의 내부영향을 최소화할 수 있을 것으로 나타났다.

• 수산해양교육연구
• /
• 제28권3호
• /
• pp.831-840
• /
• 2016

Hydrodynamic condition can be used to predict particle movement within water column and the results used to optimize environmental conditions for effective site selection, setting of environmental quality standard, waste dispersion, and pathogen transfer. To predict the extent of movement of particle from land, 3D hydrodynamic model that includes particle tracking module was applied to Geoje Bay and to calibrate particle tracking model, floating buoy measurement is operated. The model results show that short time is required for particles released into system from river to be transported to the shellfish farming area. It takes about 2 days for the particles to shellfish farming area under mean flow condition. It meant Geoje Bay, especially shellfish farming area is vulnerable to anthropogenic waste from river.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.1079-1083
• /
• 2010

하절기에 집중되는 강우로 인해 국내의 경우 저수지와 댐 건설이 불가피 하였으며, 이들 구조물에 의한 수체의 거동 및 수질의 분포 또한 일반 하천과는 다른 특성을 지니고 있다. 특히, 흐름 방향보다 수심 방향으로의 특성이 강하게 작용하는 호소에서는 3차원 수리 수질 모델링을 적용함으로써 모의 결과에 대한 신뢰성을 높일 수 있다. 하천의 발원지로서의 댐(저수지)과 하천과 하천사이에 위치한 저수지의 특성이 다르며, 하천 사이에 위치한 저수지의 경우, 하천과 하천을 이어주며 그 흐름특성과 수질의 분포 및 변화의 양상의 바뀐다는 점에서 독립적이며, 연계되는 구조의 특징을 동시에 반영할 수 있어야 한다. 본 논문에서는 낙동강에 위치한 남강댐(진양호)를 중심으로 연구를 진행하였으며, 안동댐 등처럼 하천의 발원지가 아닌 하천과 하천 사이에 위치한 호소(댐)으로 이와 같은 특징을 반영하여 수질오염총량관리제에서의 목표수질 달성여부와 점 및 비점오염원에서 발생되는 오염부하량의 변화에 따른 저수지 내의 수리 수질 모의를 EFDC-WASP의 연계 모델을 통해 연구하고자 하였다.

• 한국항해학회지
• /
• 제23권2호
• /
• pp.29-42
• /
• 1999

An accurate method of estimating ship maneuverability needs to be developed to evaluate precisely and improve the maneuverability of ships according to the water depth. In order to estimate maneuverability by a mathematical model. The hydrodynamic forces acting on a ship hull and the flow field around the ship in maneuvering motion need to be estimated. The ship speed new the berth is very low and the fluid flow around a ship hull is unsteady. So, the transient fluid motion should be considered to estimate the drag force acting on the ship hull. In the low speed and short time lateral motion, the vorticity is created by the body and grow up in the acceleration stage and the velocity induced by the vorticity affect to the body in deceleration stage. For this kind of problem, CFD is considered as a goof tool to understand the phenomena. In this paper, the 2D CFD code is used for basic consideration of the phenomena to solve the flow in the cross section of the ship considering the ship is slender and the water depth is large enough. The flow fields Added and hydrodynamic forces for the some prescribed motions are computed and compared with the preliminary experiment results. The comparison of the force with measurement is shown a fairly good agreement in tendency. The 3D Potential Calculation based on the Hess & Smith Theory is employed to predict the surge, sway added mass and yaw added moment of inertia of hydrodynamic coefficients for M/V ESSO OSAKA according to the water depth. The results are also compared with experimental data. Finally, the sway added mass of hydrodynamic coefficients for T/S HANNARA is suggested in each water depth.

• 수산해양기술연구
• /
• 제29권3호
• /
• pp.200-213
• /
• 1993

A model experiment on a midwater rope trawl net which is used in the North Pacific to catch alaska pollack is carried out in the circulating tank to examine the basic efficiency of the net. The prototype is the net used by M/S Hanil(1, 179GT, 2, 700PS), a Korean trawler. The model net was made according to the Tauti's Similarity Law of Fishing Gear in 1/100 scale by considering the condition of the tank. To measure the basic efficiency of the standard model net, the vertical opening and width between some points marked on the net were measured, and the hydrodynamic resistance were determined. Then the constructive conditions of the net were varied as follows and the factors were measured again to compare the efficiency of those nets with that of the standard net(A-1 type) front weight multiplied 1.5 times: A-2 type. buoyancy and depressing force multiplied 1.7 times: A-3 type. front weight multiplied 1.5 times on A-3 type: A-4 type. depressors rigged at ground rope: B type. cod-end stuffed with cashmylon wad: C type. The results obtained can be summarized as follows: 1. The vertical opening at the center of head rope was steeply decreased with the flow velocity increasing and the vertical opening H(m) can be expressed in H=1.2v super(-1.2)(v : flow velocity in m/sec). The width of the net varied a little when the flow velocity was over 0.4m/sec, and the width of net mouth showed about 37% of the distance between the fore tips of net pendant. The shape of net mouth was almost a circle at 0.2m/sec and then steeply flatted elliptically with the flow velocity increasing and the area of mouth S(m super(2)) can be expressed in S=(1.65-2.3v)$\times$10 super(-2). The hydrodynamic resistance of the net increased almost linearly with the flow velocity increasing and the resistance R(kg) can be expressed in R=3.2$\times$d/l$\times$abv. where d/l denotes the mean of d(diameter of netting twine) and l(length of a leg in a mesh) from wing tip to the end of bag-net except cod-end on the side pannel, and a denotes the strectched circumference of the net at the fore end of a meshed part and b the stretched length of the whole net from wing tip to the end of cod-end. 2. In the condition-varied nets, the vertical opening of head rope showed some increase in every type net except the C type, and the increase showed the greatest in the B type by 30~54%, whereas it showed decrease in the C type by 5~10%. Variation of the area of net mouth showed almost the same tendency as the vertical opening and the increase showed the greatest in the B type by 20%, whereas it showed decrease in the C type by 12%. Hydrodynamic resistance showed some increase in every type compared with the standard net, and the rate of increase indicated 5~10% in the A-2, A-3 and A-4 type, 22% in the B type and 3% in the C type.

• 융합신호처리학회논문지
• /
• 제24권2호
• /
• pp.97-102
• /
• 2023

방향타는 조선 분야에서 중요한 역할을 하기 때문에 방향타의 유체역학적 특성을 조사하기 위해 수치 시뮬레이션이 수행되었다. 유체역학적 힘과 같은 일부 값은 예인 탱크에서 쉽게 측정할 수 있지만, 실험을 통해 압력 분포, 속도 분포, 와류 발생과 같은 유동장에 대한 자세한 정보를 얻기는 어렵다. 본 연구에서는 전산유체역학(CFD)을 이용하여 방향타에 작용하는 유체역학 계수와 레이놀즈수가 미치는 영향을 연구하였다. 상용 전산유체역학 프로그램 Ansys Fluent를 이용하여 방향타 주위의 유동 특성을 연구하였고, 이때 k-epsilon 난류 모델이 사용되었다. 먼저 CFD 상용코드를 이용하여 KCS 방향타의 받음각에 따른 항력계수와 양력계수를 구하였다. 둘째, 동일한 조건에서 2차원 양력계수와 항력계수를 3차원 계수와 비교되었다. 셋째, 레이놀즈수가 유체역학적 힘에 미치는 영향이 연구되었다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.313-317
• /
• 2005

This study aimed to estimate applicability of a model to simulate circulation in estuarine lake caused by operation of drainage gates. The model consists of 2D (depth-averaged) hydrodynamic models, Delft3D-FLOW model and operation model for drainage gates. The flow through drainage gates was calculated using weir formulae with discharge coefficient, 0.8. The simulations are performed under two conditions: uncontrolled condition and controlled by periods of two days. The results on simulation of the model showed that the water level in estuarine lake was tend to increase above mean sea level. Therefore it was proved that the calibration and verification were needed in order to applicate this model for Saemankeum area.

• 한국물환경학회지
• /
• 제27권4호
• /
• pp.445-460
• /
• 2011

The objective of this study was to construct and assess the applicability of the EFDC model for Saemangeum Reservoir as a 3D hydrodynamic and water quality modeling tool that is necessary for the effective management of water quality and establishment of conservation measures. The model grids for both reservoir system only and reservoir-ocean system were created using the most recent survey data to compare the effects of different downstream boundary conditions. The model was applied for the simulations of temperature, salinity, water quality variables including chemical oxygen demand (COD), chlorophyll-a (Chl-a), phosphorus and nitrogen species and algal biomass, and validated using the field data obtained in 2008. Although the model reasonably represented the temporal and spatial variations of the state variables in the reservoir with limited boundary forcing data, the salinity level was underestimated in the middle and upstream of the reservoir when the flow data were used at downstream boundaries; Sinsi and Garyuk Gates. In turn, the error caused to increase the bias of water quality simulations, and inaccurate simulation of density flow regime of river inflow during flood events. It is likely because of the loss of momentum of sea water intrusion at downstream boundaries. In contrast to flow boundary conditions, the mixing between sea water and freshwater was well reproduced when open water boundary condition was applied. Thus, it is required to improve the downstream boundary conditions that can accommodate the real operations of the sluice gates.