• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.215-223
• /
• 2016

The low price around 1000 USD makes consumer 3D printers as a new additive manufacturing platform for the personal manufacturing where consumers can make and sell their own products. To allow the consumers to design and manufacture their products, not only economic 3D printers but also supporting information systems for their design and manufacturing are essential. This study suggests an extended product data management (PDM) system that can support both the design and manufacturing of personal products with consumer 3D printing services. This extended PDM system helps consumer designers use advanced PDM technologies for their design and connected 3D printing services with Internet of Things (IoT) technology for realization of their products. As a result, the proposed system supports the consumer designers a seamless integrated product development and manufacturing environment supported by PDM and consumer 3D printing services.

• Journal of KIISE:Software and Applications
• /
• v.33 no.10
• /
• pp.868-876
• /
• 2006

2D input data have to be converted into 3D data by means of some functions and menu system in 2D input modeling system. But data in 3D input system for virtual spatial design can be directly connected to the 3D modeling data. Nevertheless, efficient surface modeling and deformation algorithm for the 3D input modeling system are not proposed yet. In this paper, problems of conventional NURBS surface deformation methods which can occur when applied in the 3D input modeling system are introduced. And NURBS surface deformation by 3D target curves, in which the designer can easily approach, are suggested. Designer can efficiently implement the virtual spatial sketching and design by using the proposed deformation algorithm.

• Spatial Information Research
• /
• v.14 no.3 s.38
• /
• pp.321-334
• /
• 2006

3D spatial data are of increasing interest in landscape analysis, urban planning and map services based on Web, because of its reality. But the amount of 3D spatial data are very large in comparison with 2D spatial data. Therefore it is necessary to have a efficient methods to transfer and visualize 3D spatial data. The concept of Level of Detail in Computer Graphics is effective. This paper briefly presents two LOD data models of data transmission based on the spatial data model of international standards. First, it is separated LOD model that gives a LOD level to object. Second is Selective LOD model that gives a LOD level to object's element. We compared the efficiency of 3D data transmission based on two LOD model.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.694-699
• /
• 2012

In this paper, semiconductor package inspection results using white light interferometer with large F.O.V., in order to apply semiconductor product inspection process, are shown. Experimental 3D data repeatability test results for the same special bumps of each substrate are shown. Experimental 3D data repeatability test results for all the bumps in each substrate are also shown. Semiconductor package inspection using white light interferometer with large F.O.V. is very important for the fast 3D data inspection in semiconductor product inspection process. This paper is surely helpful for the development of in-line type fast 3D data inspection machine.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.131-144
• /
• 2015

This research proposes a prototype for visualizing radar rainfall data using the unity 3D engine. The mashup of radar data with topographic information is necessary for the 3D visualization of the radar data with high quality. However, the mashup of a huge amount of radar data and topographic data causes the overload of data processing and low quality of the visualization results. This research utilized the Unitiy 3D engine, a widely used engine in the game industry, for visualizing the 3D topographic data such as the satellite imagery/the DEM(Digital Elevation Model) and radar rainfall data. The satellite image segmentation technique and the image texture layer mashup technique are employed to construct the 3D visualization system prototype based on the topographic information. The developed protype will be applied to the disaster-prevention works by providing the radar rainfall data with the 3D visualization based on the topographic information.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.6-14
• /
• 2012

For integrated complementary metal oxide semiconductor (CMOS) circuits, the lateral spread for two-dimensional (2-D) impurity distributions are very important for the analyzing the devices. The measured two-dimensional SEM data obtained using the chemical etching-method matched very well with the results of the Gauss model for boron implanted samples. But the profiles in boron implanted silicon were deviated from the Gauss model. The profiles in boron implanted silicon were shown a little bit steep profile in the deep region due to backscattering effect on the near surface from the bombardments of light boron ions. From the simulated 3-D data obtained using an analytical model, the 1-D and 2-D data were compared with the experimental data and could be verified the justification from the experimental data. The data of 3-D model were also shown good agreements with the experimental and the simulated data. It can be used in the 3-D chip design and the analysis of microelectro-mecanical system (MEMS) and special devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.57-62
• /
• 2006

This treatise proposes a develop system that manufactures 3D clothes model who is used in 3D clothes getting dressed simulation. Need 3D human body model and 3D clothes model to do getting dressed simulation. Create priority work Matrix javelin to design clothes model and design 2D piece from designer Connect designed piece plain using backstitch line and create numerical value data because using designed piece and backstitch data finally and make 3D clothes model. Consist of piece design module, to read clothes data and save module, getting dressed simulation module in system that propose in this treatise.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.186-199
• /
• 2016

The shoe last which is the framework for the shoemaking is intensively combined with the 3D data and technologies. International shoe companies have already commercialized 3D printing technology in producing the shoe, but domestic shoe companies are still in their early stages. This study used the 3D scanning, 3D modeling and 3D printing of the high-technology to make the shoe last. This 3D producing processes should be helpful in building competitiveness in domestic shoe industry. The 3D foot scanning data of men in 30s(n=200) were collected in SizeKorea(2010). The basic statistics, factor and cluster analysis were performed. They were categorized in 3 groups by 3D foot measurement data, and the standard models were selected in each group. The cross sections in XY, YZ and XZ planes sliced from 3D scan data of the standard model were used in the sketches of the 3D shoe last modeling. The 3D shoe last was modeled by Solidworks CAD and printed by MakerBot Replicator2; a desktop 3D printer. This research showed the potential for utilization of 3D printing technology in the domestic shoe industry. The 3D producing process; 3D scanning, 3D modeling and 3D printing is expected to utilized widely in the fashion industry within the nearest future.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.585-592
• /
• 2000

Primary purpose of the system developed in this study is 3-D seismic data processing system for subsurface structure imaging and this system is developed in PC based on Linux for lower-cost computer. Basic data processing modules are originated from SU (Seismic Unix) which is widely used in 2-D seismic data processing and auxilious modules are developed for 3-D data processing. The system which is constructed by using these data processing modules is designed to GUI (Graphic User Interface) in order that one can easily control and for this purpose, GTK (Gimp Tool KiT) conventionally adapted in producing Linux application.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.6
• /
• pp.364-373
• /
• 2009

In this paper, we suggest the method for constructing parameterized human body model which has any required body sizes from 3D scan data. Because of well developed 3D scan technology, we can get more detailed human body model data which allow to generate precise human model. In this field, there are a lot of research is performed with 3D scan data. But previous researches have some limitations to make human body model. They need too much time to perform hole-filling process or calculate parameterization of model. Even more they missed out verification process. To solve these problems, we used several methods. We first choose proper 125 3D scan data from 5th Korean body size survey of Size Korea according to age, height and weight. We also did post process, feature point setting, RBF interpolation and align, to parameterize human model. Then principal component analysis is adapted to the result of post processed data to obtain dominant shape parameters. These steps allow to reduce process time without loss of accuracy. Finally, we compare these results and statistical data of Size Korea to verify our parameterized human model.