• Journal of Ginseng Research
• /
• v.31 no.3
• /
• pp.147-153
• /
• 2007

Effect of puffing treatment on saponins, total sugars, acidic polysaccharide, phenolic compounds, microstructure and pepsin digestibility of dried red ginseng tail root were tested. Puffing samples of dried red ginsneng tail root were pre-pared at 20rpm, 15 $kg/cm^2$, $120{\sim}150^{\circ}C$, and for 30 min by a rotary type apparatus of 5 L capacity. Crude saponin content of puffing red ginseng tail root was increased 26.5% compared to non-puffing, especially $Rg_3$ content was increased from 0.49 mg/g to 0.72 mg/g. Total sugar content was not changed, but acidic polysaccharide content was slightly decreased from 7.15% to 6.44% by puffing treatment. Total phenolic compounds was increased from 7.86% to 9.94% by puffing. In terms of individual phenolic compounds, salicylic acid was quantified in puffing tail root, but gentisic acid was quantified in non-puffing. Syringic acid was the most predominant phenolic acid, increased to about 6 times by puffing treatment. On the other hand, gallic acid, p-coumaric acid, caffeic acid and ferulic acid were highly decreased. Microstructure of cross-section in puffing tail root was shown to more uniform shape compared to non-puffing. Pepsin digestibilities of puffing and non puffing red ginseng tail root were 22.4% and 46.2%, respectively (p<0.05). The results indicated that puffing treatment might be useful increasing the bioactive components, preference and digestibility.

• Korean Journal of Agricultural Science
• /
• v.28 no.2
• /
• pp.70-77
• /
• 2001

A preliminary experiment was conducted to produce fowl-typhoid resistant egg type breeds, using three brown egg layer breeders (ISA, Hyline, and Lohman) and two white egg layer breeders (ISA and Lohman). Various economic parameters were measured from day-old to mature stages using parent stocks of each breed. No significant difference in viabilities of mature hens from 34 to 66 wk of ages was found between brown(93.3%) and white(93.5%) egg layer breeders (P>0.05). Also, there was no difference in viabilities of mature cockerels. Although not significant, the mature body weights of brown egg layer breeders tended to be heavier than those of the white egg layer breeders both in hens and cockerels. No difference in feed intakes of mature brown and white hens were detected. Ages of sexual maturity of white and brown egg layer hens were 147.7 and 140.5 d, respectively (P<0.05). Egg production of white egg layer hens during 23-66 weeks age was significantly higher than their counterpart (81.4% vs. 75.0%). Comparisons of Haugh Unit, egg shape index, yolk color, and egg weight between brown and white eggs were not significantly different; however, the brown eggshells were thicker and stronger than those of white eggs (P<0.05).

• Journal of Industrial Convergence
• /
• v.16 no.1
• /
• pp.35-40
• /
• 2018

The procedural generation algorithm is an algorithm that automatically generates a content to be used in a game by repeatedly executing a series of rules. As the size of the game increases, the amount of content used in the game increases. Accordingly, artificial intelligence research is actively conducted to automatically generate game contents using game artificial intelligence such as procedural generation. In this paper, we propose an algorithm to create 3D game world using procedural generation. The proposed algorithm generates a two-dimensional contour in which the path is naturally connected using Perlin-Noise whose noise is gradually changed. A three-dimensional Height-Map is created based on the generated two-dimensional contour lines. The generated Height-Map show that the shape of the map is normal and that the player is able to move around all the sections as in the game world created by hand. In the future, we will improve the performance of algorithms and apply them to game.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.491-503
• /
• 2014

In this paper, a $TM_{31}$ higher order mode half circular-ring microstrip antenna with monopole-like radiation characteristic for on-body communication is proposed. By using shorting vias, $TM_{31}$ resonance mode was excited, while achieving compact low-profile antenna with monopole-like radiation characteristics. To overcome the narrow bandwidth of a patch antenna, a C-shape half ring patch with shorting vias having $TM_{31}$ mode is closely located around a half circular patch. For size reduction, half mode is adopted. The proposed antenna has the overall dimensions of $0.25{\lambda}_0{\times}0.46{\lambda}_0{\times}0.025{\lambda}_0$ at the industrial, scientific, and medical(ISM) 2.45 GHz band(2.4~2.485 GHz) and the 10-dB return loss is 4.24 % ranging from 2.38 to 2.49 GHz. To verify body effect, two-thirds muscle equivalent semi solid phantom was fabricated and used to measure the antenna performance. A communication link is analysed to investigate the effect of human-body movements and antenna locations.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.30-35
• /
• 2003

The study of the scars formed on the bark of pine trees damaged by forest fire was carried out in the burned area of Samchuk and Donghae in 2000. Fire scars were formed on the bark of trees when fire passed by the tree. Fire scarring is usually found on the windward and leeward sides of the tree. Fire spread was analyzed topographically using the fire scars formed at the tree stem. Fire spread was closely related to the shape, slope and direction of the forestland. Four fire direction types are classified according to the shapes of the forestland. The height of the fire scar was higher on the leeward side than on the windward side of the trees studied. The burnt area of the total bark of the tree was over 30% in dead trees and below 12% in living trees. The regression model of the burnt stem area using the height of the fire scar, the diameter of breast height and the height of tree was Y=-2.484${\times}$Height＋0.04199${\times}$D.B.H-1.686${\times}$Windward＋11.172${\times}$Leeward＋23.432(r=0.936, F=409.968, P＞0.0001).

• Korean Journal of Plant Taxonomy
• /
• v.42 no.2
• /
• pp.150-156
• /
• 2012

While preparing a floristic study of Korean hepatics, we discovered the six unrecorded species of Lejeuneaceae from Mt. Seolak, Mt. Gaya, Geojedo, Wando and Gageodo. Archilejeunea kiushiana, Drepanolejeunea angustifolia, Lejeunea aquatica, Lejeunea otiana, Leucolejeunea japonica, and Spruceanthus semirepandus, are reported here. A. kiushiana was characterized by unlobed underleaves, homogeneous oil-bodies, and four to six perianth-keels. D. angustifolia is similar to D. ternatensis, but it differs in the dorsal margin of the leaf-lobe, which is entire or denticulate, spines never present, and leaf cells smooth or with minute dorsal bulging. L. aquatica is similar to L. japonica in that it has a wider and similar shape (wider than long) of its underleaves and has homogeneous oil-bodies. The former, however, has minute leaf-lobules (5-15 cells), 1/10 to 1/5 the length of the leaf-lobe, versus leaf-lobules 1/4 to 1/3 the length of the leaf-lobe. L. otiana is similar to L. kodamae in that it has a large and acute first tooth of the leaf-lobule but differs in having plain leaf-lobules obliquely quadrate and an indistinct second tooth. Drepanolejeunea (Spruce) Schiffn. is widely distributed in tropical and subtropical regions (Mizutani, 1961). L. japonica is characterized by entire underleaves; one large, coarsely segmented oil-body per leaf cell; and a large second tooth of the leaf lobule, two to six cells long, and two to three cells wide at the base. S. semirepandus is widely distributed in tropical and subtropical regions in Asia. This species is characterized by small homogeneous and numerous oil-bodies, up to 10 smooth perianthkeels, and leaf-lobe acute at the apex.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.248-251
• /
• 2010

A lemon double freesia (Freesia hybrida Hort.), 'Shiny Lemon' was developed from a cross between the domestic breeding lines ('Golden Crown' and 'White Wings') and 'Yvonne' followed by seedling and line selections at the National Institute of Horticultural and Herbal Science, Rural Development Administration (RDA) in 2007. Growth and flowering characteristic tests were conducted from 2003 to 2006. 'Shiny Lemon' has large double type flower with lemon color (RHS Y13D). It has multiple florets, good flower shape, and upright leaves and stalks. The average cut flower yield of 'Shiny Lemon' was 7.1 cuttings per plant in the greenhouse from 2005 to 2007. Additionally, it has good production of cormlets and vigorous growth. 'Shiny Lemon' could be cultured under greenhouse conditions in Korea.

• Journal of Environmental Impact Assessment
• /
• v.29 no.6
• /
• pp.441-452
• /
• 2020

The assessment of the river environment is widely applied as a method to establish the purpose and direction of river rehabilitation projects. This includes surveying and assessing the current state of the river environment and determining whether a previous river project was properly executed. The city of Seoul executed ecological river rehabilitation activities for the tributaries of the Han River from the 2000s following a masterplan to recover the physical shape and ecological functionality of damaged rivers. After the rehabilitation activities, the river environment had been changed substantially. In this study, physical properties, water quality properties, and ecological properties were assessed for 28 tributaries underthe control of the city of Seoul, and then those 3 properties were synthetically reassessed. From the result of the study on the physical properties, it was found that mostrivers had II-III grades. As for water quality properties, rivers had III-IV grades. The damaged rivers showed low grades of D-E based on the Aquatic Ecosystem Health evaluation. Accordingly, we concluded that all rivers of Seoul City have an unhealthy environment in terms of water quality and Aquatic Ecosystem Health, therefore it is regarded that long-term and systematic improvements are required.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.3
• /
• pp.110-113
• /
• 2011

In this paper, we propose a new method for the fabrication of GaN microstructures formed only on the vertex of GaN pyramid by using of metal catalysts. GaN pyramidal structures were selectively grown on 3 ${\mu}m$ $SiO_2$ dot patterns followed by thin film deposition of Au and Cr only on the vertex area of the GaN pyramids with precisely controlled photolithography. After the metal deposition, the samples were loaded in the MOVPE reactor for the growth of GaN microstructures for 10 minutes. Temperature for the growth of the GaN microstructures was changed from $650^{\circ}C$ to $750^{\circ}C$. Rod type GaN microstructures were grown in the direction of vertical to the six {1-101} facets and the shape of the GaN microstructures was changed depend on the type of metal.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2017

Recently, flexible cages have been introduced in an attempt to absorb and reduce the abnormal load transfer along the anterior parts of the spine. They are designed to be used with the pedicle screw systems to allow some mobility at the index level while containing ROM at the adjacent level. In this study, a finite element (FE) study was performed to assess biomechanical efficacies of the flexible cage when combined with pedicle screws with flexible rods. The post-operated models were constructed by modifying the L4-5 of a previously-validated 3-D FE model of the intact lumbar spine (L2-S1): (1) Type 1, flexible cage only; (2) Type 2, pedicle screws with flexible rods; (3) Type 3, interbody fusion cage plus pedicle screws with rigid rods; (4) Type 4, interbody fusion cage plus Type 2; (5) Type 5, Type 1 plus Type 2. Flexion/extension of 10 Nm with a compressive follower load of 400N was applied. As compared to the Type 3 (62~65%) and Type 4 (59~62%), Type 5 (53~55%) was able to limit the motion at the operated level effectively, despite moderate reduction at the adjacent level. It was also able to shift the load back to the anterior portions of the spine thus relieving excessively high posterior load transfer and to reduce stress on the endplate by absorbing the load with its flexible shape design features. The likelihood of component failure of flexble cage remained less than 30% regardless of loading conditions when combined with pedicle screws with flexible rods. Our study demonstrated that flexible cages when combined with posterior dynamic system may help reduce subsidence of cage and degeneration process at the adjacent levels while effectively providing stability at the operated level.