• Journal of Life Science
• /
• v.24 no.7
• /
• pp.798-803
• /
• 2014

Cathepsin D (CtsD), an aspartyl peptidase, is involved in apoptosis, resulting in the release of cytochrome C from mitochondria in cells. Here, we investigated microRNA regulation of CtsD expression in 3T3-L1 cells First, we observed the expression of CtsD in cells in response to doxorubicin (Dox). As expected, the level of CtsD mRNA was increased in 3T3-L1 cells exposed to Dox in a dose-dependent manner. Cellular viability of ectopically expressed CtsD cells was also decreased. Next, we used the miRanda program to search for particular microRNA targeting CtsD. MiR-145 was selected as a putative controller for CtsD because miR-145 had a high mirSVR score. In a reporter assay, the luciferase activity of cells containing the CtsD 3'-UTR region was decreased in cells transfected with miR-145 mimic compared to that of a control. The level of CtsD expression was down-regulated in preadipocytes ectopically expressing miR-145 and up-regulated by an miR-145 inhibitor. Cells also suppressed miR-145 expression when exposed to Dox. The miR-145 inhibitor reduced the cellular viability of 3T3-L1 cells. Taken together, these data suggest that miR-145 regulates CtsD-mediated cell death in adipocytes. These findings may have valuable implications concerning the molecular mechanism of CtsD-mediated cell death in obesity, suggesting that CtaD could be a useful therapeutic tool for the prevention and treatment of obesity by regulating fat cell numbers.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.12
• /
• pp.2056-2060
• /
• 2007

Transcription factor GATA-3 is the critical transcription factor for Th2 cell differentiation. In spite of its importance in Th2 cell differentiation, the molecular mechanism for its action in Th2 differentiation is poorly understood. Previous studies have suggested that GATA-3 may be involved in the chromatin remodeling in the Th2 cytokine locus. To determine whether GATA-3 exerts its effect on its target sites in the extrachromosomal status, cell transfection assay was performed. In this assay, 800 bp IL4 promoter-luciferase constructs linked with GATA-3 target sites were transfected into the M12 B cell line, D10 mouse Th2 cell lines, and human T lymphoma Jurkat cell lines with or without the GATA-3 expression vector. The GATA-3 effects on its target sites were minimal in the extrachromosomal status, supporting the previous propositions that GATA-3 functions at the chromatin level by remodeling chromatin structure.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.26 no.4
• /
• pp.140-149
• /
• 2013

Purpose: The purpose of this study is to investigate the change and correlation of pulse energy in Left and Right Chon, Kwan, Cheok during menstruation, especially around menstruation start date. Methods: The subjects of this experiment were 8 healthy women whose menstruation periods are regular. We measured 3D Blood Pressure Pulse Analyzer (3D-MAC) tests before and after menstruation start date. Results: The results were as follows 1. The pulse energy of the Right Chon was significantly decreased and Left Kwan was comparatively increased during the next day of menstruation start date than previous day. 2. There was a negative correlation between Left Kwan and Left Cheok, Right Chon and Right Kwan pulse energy during the previous and menstruation start date. The negative correlation disappeared between Right Chon and Right Kwan at the next day of menstruation start date. Conclusions: The results suggest that Chon, Kwan, Cheok pulse energy changes are related to menstruation and reflect physiological mechanism of menstruating women. Further study will be needed.

• Advances in Traditional Medicine
• /
• v.8 no.3
• /
• pp.286-294
• /
• 2008

We have studied the possible mechanism of anti-asthmatic action of ethanolic extracts of dried seeds of Lepidium sativum (EXLS, 400 mg/kg) using various experimental models. EXLS produced an increase in the Pre-Convulsion Dyspnoea time induced by histamine and acetylcholine aerosol, a significant reduction in the elevated leucocyte counts in the Broncho-Alveolar Lavage fluid of sensitized guinea-pigs and reduction in the paw edema volume as compared to the control rats. Treatment with EXLS also produced decrease in the elevated histamine release from the sensitized guinea-pig lungs. The anti-asthmatic anti-inflammatory responses of EXLS was supported by improvement in microscopic changes like infiltration of inflammatory cells, submucosal edema, epithelial desquamation and reduced lumen size of the bronchi. The $pD_2$ values of histamine in tracheal chain and taenia-coli were significantly greater and that in lung strip was lower in the sensitized animals as compared to control. Treatment of sensitized guinea pigs with EXLS significantly decreased $pD_2$ values of histamine in all three preparations. Our data suggest the prevention of hyper-responsiveness in bronchial smooth muscles and inhibition of the immediate hypersensitive reaction, histamine release in the lungs and the infiltration of various inflammatory cells as the possible mechanisms of anti-asthmatic activity of EXLS.

• Steel and Composite Structures
• /
• v.22 no.2
• /
• pp.399-409
• /
• 2016

The fracture propagation mechanism and fractured rock mass failure mechanism were important research in geotechnical engineering field. Many failures and instability in geotechnical engineering were related on fractures propagation, coalescence and interaction in rock mass under the external force. Most of the current research were limited to two-dimensional for the brittleness and transparency of three-dimensional fracture materials couldn't meet the requirements of the experiment. New materials with good transparent and brittleness were developed by authors. The making method of multi fracture specimens were established and made molds that could be reused. The tension-compression ratio of the material reached above 1/6 in normal temperature. Uniaxial and biaxial loading tests of single and double fracture specimens were carried out. Four new fractures were not found in the experiment of two-dimensional fractures such as the fin shaped crack, wrapping wing crack and petal crack and anti-wing crack. The relationship between stress and strain of the specimens were studied. The specimens with the load had experienced four stages of deformation and the process of the fracture propagation was clearly seen in each stage. The expansion characteristics of the fractured specimens were more obvious than the previous research.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.294-298
• /
• 2003

The complex, unsteady, self-sustained pressure oscillations induced by supersonic flow past a rectangular cavity is investigated using numerical simulations. The present numerical study is performed using a parallel, multiblock solver for the two-dimensional, compressible Navier­Stokes equations. Open cavities with length-to-depth (L / D) ratio in the range 0.5 - 3.3 are considered. This paper sheds light on the cavity physics, cavity oscillatory mechanism, and the organisation of vortical structures inside the cavity. The vortex shedding phenomenon, the shear layer impingement event at the aft wall and the movement of the acoustic/compression wave within the cavity are well predicted. The vortical structures· and the source of the acoustic disturbances are found to be located near the aft wall of the cavity. With the increase in the cavity length, strong recompression of the flow near the aft wall leading to a sudden jump in the cavity form drag is observed. The estimated cavity tones are in good agreement with the available semi­empirical relation. Multiple peaks are noticed in deep and long cavities. For the present free­stream Mach number 1.71, it is observed that around L/D=2.0, the cavity oscillatory mechanism changes from the transverse to longitudinal oscillatory mode. The effects of this transition on various fluid dynamics and acoustic properties are also discussed.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.251-258
• /
• 2005

In this study, a new concept for simulating a long-term mechanical degradation mechanism of shotcrete in tunnels has been proposed. In fact, it is known that the degradation takes place mainly by internal cracks and reduced stiffness, which results mainly from volume expansion of shotcrete and corrosion of cement materials, respectively. This degradation mechanism of shotcrete in tunnels appears similar to those of the most kinds of chemical reactions in tunnels. Therefore, the mechanical degradation induced by a kinds of chemical reaction was generalized and mathematically formulated in the framework of thermodynamics. The numerical model was implemented to a 3D finite element code, which can be used to simulate behaviour of shotcrete structures undergoing external forces as well as chemical degradation in time. A number of illustrative examples were given to show the feasibility of the model in tunnel designs with consideration of long-term degradation effect of shotcrete quantitatively for increase of long-term safety of tunnels.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.35-39
• /
• 2017

We used a construction method using a CNC milling machine, where free-formed molds were made by cutting EPS (Expanded PolyStyrene) foam with the CNC machine, to build free-formed buildings. CNC milling is off-the-shelf technology that can easily cut EPS foam; however its production cost is too high and the time to manufacture an EPS mold is too long. This paper proposes a novel cutting machine with a fast and cost effective mechanism to manufacture EPS concrete molds. Our machine comprises a cutter and Cartesian coordinate type moving mechanism, where the cutter cuts EPS foam using a hotwire in the shape of '$\sqcap$' and is capable of adjusting its cutting angle in real-time while keeping its cutting width. We proved through cutting experiments on the CNC machine that cutting time was greatly shortened compared to the conventional method and that the resulting concrete mold satisfied manufacturing precision.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.968-973
• /
• 1998

Solvolyses of para-substituted phenyl chloroformates in water, $D_2O,\;CH_3OD$, 50% $D_2O-CH_3OD$, and in aqueous binary mixtures of acetone, ethanol, methanol are investigated at 25.0 ℃. Product selectivities are reported for a wide range of ethanol-water and methanol-water solvent compositions. These data are interpreted using the Grunwald-Winstein relationship, Hammett equation, and quantum mechanical model. Grunwald-Winstein plots of the first-order rate constants for phenyl chloroformates with $Y_{Cl}$ (based on 1-adamantyl chloride) show marked dispersions into three separate curves for the three aqueous mixtures with a small m value and a rate maximum for aqueous alcohol solvents. To account for these results, third-order rate constants, $k_{ww},\;k_{aw},\;k_{wa}$, and $k_{aa}$ were calculated from the observed $k_{ww}\;and\;k_{aa}$ values together with $k_{aw}\;and\;k_{wa}$ calculated from the computer fit. The kinetic solvent isotope effects determined in water and methanol are consistent with the proposed mechanism of the general base catalyzed carbonyl addition-elimination for para-substituted phenyl chloroformates solvolyses based on mass law and stoichiometric salvation effect studies. This study has shown that the quantum mechanical model predicts transition state variation correctly for $S_N2\;like\;S_AN$ reaction mechanism of para-substituted phenyl chloroformates.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.691-706
• /
• 2021

This paper aims to numerically investigate violent sloshing in a partially filled three-dimensional (3D) prismatic tank with or without a baffle, further to clarify the suppressing performance of the baffle and the damping mechanism of sloshing. The numerical model is based on a Cartesian grid multiphase flow method, and it is well validated by nonlinear sloshing in a 3D rectangular tank with a vertical baffle. Then, sloshing in an unbaffled and baffled prismatic tank is parametrically studied. The effects of chamfered walls on the resonance frequency and the impact pressure are analyzed. The resonance frequencies for the baffled prismatic tank under different water depths and baffle heights are identified. Moreover, we investigated the effects of the baffle on the impact pressure and the free surface elevation. Further, the free surface elevation, pressure and vortex contours are analyzed to clarify the damping mechanism between the baffle and the fluid.