• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.261-273
• /
• 2017

The control of the deformative behaviour of pre-stressed concrete roof elements for a satisfactory service performance is a main issue of their structural design. Slender light-weight wing-shaped roof elements, typical of the European heritage, are particularly sensitive to this problem. The paper presents the results of deformation measurements during storage and of both torsional-flexural and purely flexural load tests carried out on a full-scale 40.5 m long innovative wing-shaped roof element. An element-based simplified integral procedure that de-couples the evolution of the deflection profile with the progressive shortening of the beam is adopted to catch the experimental visco-elastic behaviour of the element and the predictions are compared with normative close-form solutions. A linear 3D fem model is developed to investigate the torsional-flexural behaviour of the member. A mechanical non-linear beam model is used to predict the purely flexural behaviour of the roof member in the pre- and post-cracking phases and to validate the loss prediction of the adopted procedure. Both experimental and numerical results highlight that the adopted analysis method is viable and sound for an accurate simulation of the service behaviour of precast roof elements.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.18-21
• /
• 2004

A GFRP based composite blade was developed for a 750kW wind energy conversion system of type class I. The blade sectional geometry was designed to have a general shell-spar structure. The load cases specified in the IEC61400-1 international specification were considered. For withstanding all relevant extreme loads, the structural analysis for the complete blade was performed using a commercial FEM code. The static load carrying capacity, buckling stability, blade tip deflection and natural frequencies at various rotational speeds were evaluated to satisfy the strength requirements in accordance with the IEC61400-1 and GL Regulations. For designing a lightweight blade, the thickness and the lay-up pattern of the skin-foam sandwich structures were optimized iteratively using the DOT program T-bolts were used for joining the blade root and the hub, which were modeled using a 3D FE volume model. In order to confirm the safety of the root connection, the static stresses of the thick root laminate and the steel. bolts were predicted by taking account of the bolt pretension and the root bending moments. The calculated stresses were compared with the material strengths.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.321-324
• /
• 2007

The actuators of anti-vibration system(AVS) can be separated into several types: piezoelectric actuators, pneumatic springs, cylinders, rotating motor and linear motor. The last one has some advantages, such as low noise, low vibration, simpler configuration and possibility of direct drive. The voice coil motor(VCM) is one type of linear motor, originally used in speaker system. VCM actuators are usually used in occasions that rapid and controlled motion of devices are required. In this paper, a controller which satisfies system specification(e.g. current controller bandwidth) within whole operation range is designed. For that objective, parameters as position were initially obtained with 3D FEM analysis and motor modeling was performed. A current controller in 2-axis VCM drive system was designed and then performance of the proposed controller was verified with simulation using Simplorer and an experimental result.

• Structural Engineering and Mechanics
• /
• 제68권6호
• /
• pp.721-733
• /
• 2018

The modal frequency responses of functionally graded (FG) sandwich doubly curved shell panels are investigated using a higher-order finite element formulation. The system of equations of the panel structure derived using Hamilton's principle for the evaluation of natural frequencies. The present shell panel model is discretised using the isoparametric Lagrangian element (nine nodes and nine degrees of freedom per node). An in-house MATLAB code is prepared using higher-order kinematics in association with the finite element scheme for the calculation of modal values. The stability of the opted numerical vibration frequency solutions for the various shell geometries i.e., single and doubly curved FG sandwich structure are proven via the convergence test. Further, close conformance of the finite element frequency solutions for the FG sandwich structures is found when compared with the published theoretical predictions (numerical, analytical and 3D elasticity solutions). Subsequently, appropriate numerical examples are solved pertaining to various design factors (curvature ratio, core-face thickness ratio, aspect ratio, support conditions, power-law index and sandwich symmetry type) those have the significant influence on the free vibration modal data of the FG sandwich curved structure.

• Structural Engineering and Mechanics
• /
• 제88권1호
• /
• pp.67-81
• /
• 2023

The reinforced concrete (RC) structures might need strengthening or upgradation due to adverse environmental conditions, design defects, modification requirements, and to prolong the expected lifespan. The RC beams have been efficiently strengthened using the near surface mounted (NSM) approach over the externally bonded reinforcing (EBR) system. In this study, the performance of RC beam elements strengthened with NSM-steel rebars was investigated using an experimental program and nonlinear finite element modeling (FEM). Nine medium-sized, rectangular cross-section RC beams total in number made up for the experimental evaluation. The beams strengthened with varying percentages of NSM reinforcement, and the number of grooves was assessed in four-point bending experiments up to failure. Based on the experimental evaluation, the load-displacement response, crack features, and failure modes of the strengthened beams were recorded and considered. According to the experimental findings, NSM steel greatly improved the flexural strength (up to about 84%) and stiffness of RC beams. The flexural response of the tested beams was simulated using a 3D non-linear finite element (FE) model. The findings of the experiments and the numerical analysis showed good agreement. The effect of the NSM groove and reinforcement on the structural response was then assessed parametrically.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.506-519
• /
• 2024

To simulate the verification process using materials from a decommissioned reactor, a mock-up of the bottom-mounted instrument nozzle in the Kori 1 reactor, where the nozzle was attached to a plate by J-groove dissimilar metal welding, was fabricated. The mock-up distortion was quantified by measuring the plate surface displacement after welding. The residual stresses formed on the support plate surface and the inner surface of the nozzle were then analyzed using the hole-drilling method, contour method, and neutron diffraction. Welding simulations were performed using a 3D finite element method to validate the measured results. The measured and computed stress distributions on the support plate exhibited reasonable agreement. Conversely, the stresses on the inside of the nozzle were found to have an indisputable difference in the contour method and neutron diffraction measurements, which demonstrated strong tensile and compressive hoop stresses, respectively. The possible origins of such differences were investigated and we have provided some suggestions for a precise evaluation in the simulation. This study is expected to be useful in future research on decommissioned reactors.

• 한국컴퓨터정보학회논문지
• /
• 제17권9호
• /
• pp.9-16
• /
• 2012

본 논문에서는 유한요소법에서 희소행렬의 효율적인 저장을 위한 2차원 가변길이 벡터 저장구조를 제안한다. 제안한 저장구조는 유한요소 전체 방정식의 거대희소행렬 $N{\times}N$ 대신, 전체 행의 개수 N의 상삼각행렬에서 0이 아닌 실제 필요한 값들만 2차원 가변길이 벡터를 이용하여 저장하는 방법이다. 이 방법을 이용하면, 해석대상의 2차원 격자구조에서는 각 절점당 최소 1개에서 최대 5개까지의 저장 공간이 필요하게 되고, 3차원 격자구조에서는 각 절점당 최소 1개에서 최대 14개까지의 저장 공간이 필요하게 된다. 인덱스를 포함해도 2배 이상을 넘지 않는다. 본 논문의 실험 결과에 의해, 제안한 저장구조는 총 절점 개수가 많아질수록 기존의 최대칼럼 높이를 저장하는 스카이 라인 저장구조보다 메모리 공간을 효과적으로 줄일 수 있는 구조임을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.49-54
• /
• 2009

This paper presents the numerical simulation results on the moving type electrodynamic suspension (EDS) simulator and static type EDS simulator using high-Tc superconducting (HTS) levitation magnet. The levitation force of the EDS system is formed by the reaction between the moving magnet and the fixed ground conductor. The possible two ways to simulate the EDS system were simulated in this paper by using finite element method (FEM). The first way was the moving type simulator which consists of the fixed HTS magnet and the moving ground conductor. The second way was the static type simulator which consists of the fixed magnet, the fixed ground conductor and the ac current supply system. To verify the characteristics of high speed EDS system with the moving type simulator heavy, large and fast moving ground conductor is needed. The static type simulator can get the characteristics of the high speed EDS system by applying equivalent ac current to velocity, therefore it does not need large moving part. The static type EDS simulator, which can consist of an HTS magnet, the fixed ground conductor(s), an AC power supply and the measuring devices, also test the effect of the shape of the ground conductor easily. The plate type ground conductor made stronger levitation force than ring type ground conductor. Although the outer diameter 335 mm ring type ground conductor (Ring3) was larger than the outer diameter 235 mm ground conductor (Ring2), the levitation force by Ring2 was stronger than that by Ring3. From the calculation results on this paper, the consideration of the magnetic flux distribution according to the levitation height should be included in the process of the ground conductor design.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.69-78
• /
• 2008

본 논문에서는 내하력이 저감된 노후화 된 콘크리트 하수관거의 보강공법의 타당성을 검증하기 위하여 정적재하 시험을 실시하였다. 내경 0.8 m, 1.0 m, 1.5 m인 원형관과 폭 2.0 m, 2.5 m인 상자형관을 대상으로 하였으며, 신관을 대상으로 정적 재하시험을 통하여 관 내부에 충분한 균열을 발생시킨 후 보강공법을 적용 한 후 다시 정적재하시험을 실시하였다. 본 연구에서 적용 된 보강공법은 균열관 내부에 스틸보강재가 추가된 프로파일과 고강도 모르타르를 이용하여 화학적 열화에 대한 저항성과 단면 내력을 증진 시킨 것이다. 보강공법 적용 후 단면 내력은 균열발생 이전 신관에 비해 원형관의 경우 1.66 ~3.50배, 상자형관의 경우 1.66~3.10배 정도 증가하였다. 또한 ABAQUS 6.6을 이용하여 보강공법 적용 전 후 콘크리트 원형관과 상자형관의 비선형 해석을 수행하였다. C3D8R 솔리드 요소를 사용하였고, concrete damage plasticity option을 적용하였다. 원형관과 상자형관에 배근된 철근의 영향성을 해석상 반영하기 위하여 합성 재료식을 유도하여 적용하였다.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.75-81
• /
• 2015

본 논문에서는 2개의 패시브 소자가 임베디드된 PoP(Package on Package)용 양면 기판의 휨을 감소시키기 위해 유한요소법을 이용한 수치해석과 파라메타 설계를 위한 다구찌법이 사용되었다. 양면 회로층 두께와 솔더 레지스트 두께가 4인자 3수준으로 설계되어 파라메타 영향도가 분석되었다. 또한, 유닛 영역의 솔더 레지스트가 제거하거나 도포된 모델의 휨을 해석하여 솔더 레지스트의 영향도를 분석하였다. 마지막으로 실험을 통해 수치해석과 다구찌법에 의한 파라메타 설계의 효과를 입증하였다. 연구결과에 의하면 휨에 미치는 영향은 볼 사이드에 있는 회로층이 지배적으로 크고 칩 사이드의 회로층이 두 번째로 크며 솔더 레지스트의 영향이 가장 작았다. 또한, 칩 사이드 유닛영역의 솔더 레지스트는 도포 유무에 따른 영향도가 매우 작았다. 한편 기판의 휨은 볼 사이드 회로층의 두께가 얇을수록, 칩 사이드 회로층의 두께와 솔더 레지스트의 두께는 두꺼울수록 감소하였다.