• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.141-147
• /
• 2002

Profile machining using cutter diameter compensation is widely used in die and mould manufacturing. Especially automotive die makers try to use 3D-profile machining for trimming or flange dies. But the technological requirements and implementation issues haven't been defined. In this paper we summarized the requirements and issues of 3D-profile machining. Approximation of input profiles into sequences of line and helical arc is the first major issue. The second major issue is removing cutter inter- ference from the approximated curves holding z-values when the maximum cutter diameter is given. Keeping constant machining width, local machining, path linking problems and several detail technological requirements are also discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.63-66
• /
• 2003

Forged gears have the obvious advantages with the greater utilisation of raw material and high productivity over the machined gears. The forged bevel gear has been used in differential gear for automotive with a high reliance. On the other hand, the studies have been continued to improve the accuracy and expand the applying areas. In this paper, a whole manufacturing process for forged gear from die design and cold forging to heat-treatment was introduced. The stress and elastic deformation for forging die have been analysed by the 3D-FEM-package. The real elastic deformation of die was measured by the strain-gages. The elastic deformation of die was reached to 1mm, in terms of the present study. The analysed quantitative dimension of die was taken into consideration into the CAD/CAM data for forging die.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1164-1169
• /
• 2009

본 논문에서는 자동화 모듈인 씨마트론 다이 디자인을 활용하여 자동차에 사용되는 브라켓을 3D로 설계를 하였다. 제품의 스탬핑을 원활하게 하기 위하여 스트립 레이아웃을 일부 수정하여 광폭 2열 2개 뽑기의 내측캐리어를 단 배열로 블랭크 레이아웃을 최적화하였다. 11개 공정으로 3D 설계를 완성하였다.

• Design & Manufacturing
• /
• 제9권1호
• /
• pp.18-22
• /
• 2015

Mold making and product manufacturing process was made by a die through a number of stages. Thereby, it takes a long period of time from the manufacture of mold until passed the products to consumers. However, it is not possible to meet the diverse desires purchasing of consumer. We made a 3D CAD Model aligned with product scan data using reverse engineering. Utilizing thereafter flow analysis to derive the optimal mold conditions, by applying the condition, and devised a mold fabrication process that is much shorter than the conventional process for fabricating a mold. In this study, the outlet cover to the product, it describes a process, as a result, it was confirmed that the number of steps can be shortened much more than the conventional process.

• 소성∙가공
• /
• 제19권3호
• /
• pp.173-178
• /
• 2010

A die cast impeller blade has been developed in the effort on cost reduction in marine equipment industry. The purpose of this work is to optimize the die casting process using Taguchi's design of experiment for minimizing the internal defect of the die cast impeller blade. The experiments were preformed using the numerical simulation based on the L18 orthogonal array. As a results, the internal defect size of the die cast impeller blade for optimal design was controlled less than 1mm.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.61-65
• /
• 2011

The capabilities of finite elements codes allow now accurate simulations of blanking processes when appropriate materials modelling are used. Over the last decade, numerous numerical studies have focused on the influence of process parameters such as punch-die clearance, tools geometry and friction on blanking force and blank profile. In this study, three dimensional finite element analysis is carried out to design a lead frame blanking die using LS-Dyna3D package. After design of the blanking die, an experiment is also carried out to investigate the characteristics of blanking for nickel alloy Alloy42, a kind of IC lead frame material. In this paper, it has been researched the investigation to examine the influence of process parameters such as clearance and air cylinder pressure on the accuracy of sheared plane. Through the experiment results, it is shown that the quality of sheared plane is less affected by clearance and air cylinder pressure.

• 소성∙가공
• /
• 제19권2호
• /
• pp.132-137
• /
• 2010

In the multi-pass shape drawing process, the appropriate process design is very important to produce sound products. The reduction ratio, die angle, and the intermediate die shape are very important process variable of the multi-pass shape drawing. The aim of this study is the determination of the reduction ratio, die angle, and the intermediate die shape of the 2 pass shape drawing process for producing steering spline shaft. In this study, FE analysis, Taguchi method, and ANN(artificial neural network) were applied to determine the appropriate reduction ratio, die angle, and intermediate die shape. After the determination of the process variables, FE analysis and drawing experiment were performed to evaluate the effectiveness of the determined process variables. The dimensional accuracy of the final drawn spline shaft was evaluated by using 3D surface profiler and 3D laser digitizing system.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.33-41
• /
• 2010

This study was aimed at the design of the dies for the unified pipe joint of the intermediate shaft using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation, 'Deform-3d' and 'eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the process analysis, we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of die design, we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for multi-forging has been developed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.84-88
• /
• 2003

In this paper, The optimum design of a die shape has been carried out the FEM analysis of a pilger mill process considering various factors. The pilger mill forming process consists of a pair of rotating die which has appropriate surface shape. The important design parameters of the pilger mill are the feed rate and the profile of grooved die. Optimum design procedure was performed in order to investigated effects on the forming load and the deformed shape of material depending on the die radius profile. Profile of the die surface for the optimum design were suggested with the linear, the cosine and the quadratic curve considering a physical forming process. The surface of each die was modeled using the 3DAutoCAD and the analysis of pilger forming process was performed using the LS-DYNA3D. The optimum profile of the die shape for the pilger mill was determined to the quadratic profile. Since the analysis results provide that the model of the quadratic profile gives the lowest forming load and a proper deformed shape.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.192-195
• /
• 2006

본 논문에서는 다이 플레이트(Die Plate)를 제작할 때 생산성 향상을 위해서 3D CAD/CAM 시스템을 적용하였다. 사용된 3D CAD/CAM 소프트웨어는 UG NX 3.0이며 생성된 NC 코드는 CNC밀링 및 와이어 컷 방전가공기에 전송되어 다이 플레이트를 자동 가공한다.