• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.3
• /
• pp.35-44
• /
• 2000

전편의 실험적 연구에 이어서, 기 수행된 4개의 외부 접합부 시험체에 현존하는 여러 강도 예측식을 사용하여 콘크리트 기둥-강재 보 접합부의 내진 성능을 결정하는 패널 전단 및 지압 강도를 평가하였다. 또한, 접합부 패널지역의 변형특성을 묘사할 수 있는 일련의 스프링을 사용한 macro 형태의 해석모델이 논의되었으며, 이에 따라 Drain-2DX 및 IDARC 등의 상용프로그램을 사용하여 접합부의 패널전단 및 지압 파괴형태의 변형을 포함하는 단순해석이 수행되었다. 강도 예측결과에 의하면 본 연구에서 제시하는 수정된 내부 콘크리트 패널 전단 강도식을 포함하고 있는 ASCE 방법이 실험결과에 가장 근접한 것으로 나타났으며, 본 연구에서 검토된 패널지역 변형을 고려한 단순해석모델은 향후 전체 건물해석에 사용할수 있는 것으로 판단되었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.153-163
• /
• 1999

본 연구에서는 격자패널을 통한 소음전달을 감소시키기 위하여 외부 구조적 가진으로부터 유발된 경량 패널의 진동을 능동 제어하는 기법을 기술한다. 최적 되먹임제어기와 적응 앞먹임제어기가 결합된 혼합형 제어기가 진동제어기로 사용된다. 되먹임제어기는 주파수 영역의 모델규명법에 의해 추출된 다중 입/출력 패널진동계 모델에 대하여 LQG 최적기법을 이용하여 감쇠능을 향상시키도록 설계된다. 앞먹임제어기는 되먹임 궤환의 결합효과를 자동적으로 보정할 수 있는 제안된 학습법칙에 기초하여 패널의 잔류진동이 최소가 되도록 적응된다. 45.7${\times}$45.7${\times}$2.54 ${cm^3}$ 벌집형상의 고강도 패널, 4개의 관성형 구동기 및 이산신호처리장치에 의해 구현된 패널 진동계에 대한 능동제어 실험을 수행해 본 결과 600Hz 주파수대역에 대한 12dB 진동저감이 이루어 질 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.153-164
• /
• 2013

In this paper, lateral-torsional buckling(LTB) strength of HSB800 high strength steel plate girder with monosymmetric section under uniform moment was evaluated by nonlinear analysis. The unbraced length in inelastic LTB range was considered for the sections whose smaller or larger flange is in compression with slender, noncompact and compact web. Analyses of SM490 steel girders were first performed with the single-panel and three-panel model to judge the validity of the constructed models by comparing those results with Eurocode 3, AASHTO and AISC codes. By using the same models, LTB strength of HSB800 girder was evaluated and it was found that the sections whose smaller flange is in compression with noncompact flange-slender/noncompact web could not reach the flexural strength of the design codes.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.141-151
• /
• 2013

In this paper, lateral-torsional buckling(LTB) strength of HSB800 steel plate girder under uniform bending moment was estimated by the nonlinear analysis. Doubly symmetric sections with slender, noncompact and compact webs were considered and the LTB strength in the inelastic range was estimated by taking initial imperfection and residual stress into account. For the numerical analysis, single-panel model and three-panel model were considered and analysis of SM490 steel plate girder was performed to judge the validity of the constructed models by comparing the results with AASHTO, AISC, Eurocode and KHBDC(LSD) codes. By using the same models, LTB strength of HSB800 girder was evaluated and it was acknowledged that the current codes can be applied to HSB800 girders with doubly symmetric section in the inelastic LTB range.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.293-308
• /
• 1999

이 논문에서는 패널, 깊은 보 그리고 전단벽과 같이 평면응력상태하에 있는 철근콘크리트 구조물의 비선형 유한요소해석에 있어서의 직교이방성 콘크리트 구성 모델의 적용성을 보여준다. 등가의 일축 변형을 개념을 토대로 콘크리트의 구성 관계가 주변형률 축과 일치하고 하중이력에 따라 회전하는 직교하는 축에 대해 제시된다. 제안된 모델은 이축 압축응력상태와 인장-압축 응력상태에서 각각 압축강도의 증가와 인장 저항력의 감소효과를 보여주는 이축 파괴영역의 정의를 포함한다. 인장균열이 발생한 후, 콘크리트의 압축강도의 감소효과가 제시되고, 인장강화효과로 알려진 철근에 의해 지지되는 콘크리트의 인장응력이 고려된다. 평균응력과 평균변형률 개념을 사용하여 힘의 평형, 적합조건 그리고 철근과 철근을 둘러싼 콘크리트 사이의 부착응력-슬림 관계를 토대로 인장강화효과를 모사하기 위한 모델이 제안된다. 유한요소 모델에 의한 예측은 유용한 실험자료와의 비교에 의해 입증된다. 이 논문에서는 해석결과와 이상화한 전단 패널실험으로부터 얻어진 실험값의 비교연구가 수행되고, 제안된 모델의 타당성을 보여주기 위해 서로 다른 응력상태하의 전단 패널 보와 벽체의 힘-변위 관계를 평가하였다.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.47-54
• /
• 2010

This study is analyze the damage of warehouse fire accident be made through the fire characteristic database of combustibles and real scale fire test of warehouse mock-up. Combustibles fire tests are carried out for database using RCT (Room Corner Tester) to predict fire growth the goods. A mockup ($3m{\times}3m{\times}2.4m$) of clothes warehouse was built and real scale fire test by LSC (Large Scale Calorimeter) base on the fire characteristic DB. The mock-up of clothes warehouse is made of two type sandwich panels (Glass wool, EPS foam sandwich panel). As a mock-up test result, test 1 (Glass wool sandwich panel) and test 2 (EPS foam sandwich panel) indicating fire growth such as 5 MW, 11 MW of maximum HRR (Heat Release Rate).

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.63-75
• /
• 2000

Stated Preference (SP) data has been regarded as more useful than Revealed Preference (RP) data, because researchers can investigate the respondents\` Preference and attitude for a traffic condition or a new traffic system by using the SP data. However, the SP data has two bias: the first one is the bias inherent in SP data and the latter one is the attrition bias in SP panel data. If the biases do not corrected, the choice model using SP data may predict a erroneous future demand. In this Paper, six route choice models are constructed to deal with the SP biases, and. these six models are classified into cross-sectional models (model I∼IH) and dynamic models (model IV∼VI) From the six models. some remarkable results are obtained. The cross-sectional model that incorporate RP choice results of responders with SP cross-sectional model can correct the biases inherent in SP data, and also the dynamic models can consider the temporal variations of the effectiveness of state dependence in SP responses by assuming a simple exponential function of the state dependence. WESML method that use the estimated attrition probability is also adopted to correct the attrition bias in SP Panel data. The results can be contributed to the dynamic modeling of SP Panel data and also useful to predict more exact demand.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1201-1206
• /
• 2008

This study is focused on the investigation of the modal characteristics of the preliminary models of science technology satellite-3 (STSAT-3). Prior to the final decision of the composite structure model, several candidate structure models have been developed so as to find the most qualified structures with respect to the satellite structure systems' requirements and then utilize the information achieved to a real design. The main structure is composed of fiber reinforced composite faced honeycomb sandwich panel whose modal characteristics are found and compared to each other by means of finite element numerical analyses. Results from the current study demonstrate that a rectangular box shape having supporting inner panel shows relatively higher fundamental mode frequencies than octagonal box shape and etc., and regardless of the structure model shape tested herein, the fundamental mode turns out lateral bending mode.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.3
• /
• pp.79-84
• /
• 2023

Image generation models have been applied in various fields to overcome data sparsity, time and cost issues. However, it has limitations in generating images from regular pattern images and detecting defects in such data. In this paper, we verified the feasibility of the image generation model to generate pattern images and applied it to data augmentation for defect detection of OLED panels. The data required to train an OLED defect detection model is difficult to obtain due to the high cost of OLED panels. Therefore, even if the data set is obtained, it is necessary to define and classify various defect types. This paper introduces an OLED panel defect data acquisition system that acquires a hypothetical data set and augments the data with an image generation model. In addition, the difficulty of generating pattern images in the diffusion model is identified and a possibility is proposed, and the limitations of data augmentation and defect detection data augmentation using the image generation model are improved.

• Composites Research
• /
• v.28 no.2
• /
• pp.58-64
• /
• 2015

The purpose of this paper is to suggest the effective equivalent finite element model for the impact limiter of a nuclear spent fuel shipping cask made of sandwich composite panels. The sandwich composite panels were composed of a metallic facesheet and a core material made of urethane foam, balsa wood and red wood, respectively. The effective equivalent finite element model for the impact limiter was proposed by comparing the results of low-velocity impact test of sandwich panels. An explicit finite element analysis based on LS-DYNA 3D was done in this study. The results showed that the solid elements were recommended to model the facesheet and core of sandwich panels for impact limiter compared to combination modeling method, in which the layered shell element for facesheet and solid element for core material are used. In particular, the solid element for balsa and red wood core materials should be modeled by the element elimination approach.