• 제목/요약/키워드: 3 section control

검색결과 654건 처리시간 0.033초

The CDMA Mobile System Architecture

  • Shin, Sung-Moon;Lee, Hun;Han, Ki-Chul
    • ETRI Journal
    • /
    • 제19권3호
    • /
    • pp.98-115
    • /
    • 1997
  • The architecture of the CDMA mobile system (CMS) is developed based on three function groups - service resource, service control, and service management groups. In this paper, the CMS architecture is discussed from the point of view of implementing these functions. The variable length packets are used for transmission. The synchronization clock signals are derived form the GPS receiver. The open loop and closed loop techniques are used for the power control. The internationally accepted signaling and network protocols are employed. The call control for the primary services in designed to provide efficient mobile telecommunication services. The softer handoff is implemented in one card. The mobile assisted handoff and the network assisted handoff are employed in the soft and hard handoffs. The authentication is based on the secret data which includes random numbers. The management functions, which include the location management, resource management, cell boundary management and OAM management, are implemented to warrant the system efficiency, maximum capacity and high reliability. The architecture ensures that the CMS is flexible and expandable to provide subscribers with economic and efficient system configuration. The dynamic power control, adaptive channel allocation. and dynamic cell boundary management are recommended for future work.

  • PDF

낙엽송 블록접착집성재의 접착 및 휨 강도 성능 (Bending and Bonding Strength Performances of Larix Block-glued Glulam)

  • 이인환;홍순일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권3호
    • /
    • pp.315-322
    • /
    • 2016
  • 2개 이상의 보부재 집성재 요소들의 측면접착으로 제작된 "블록접착집성재"는 대단면 목조건축물의 건축부재로 활용 가능한 구조용재다. 블록접착집성재의 측면은 접착제의 종류와 도포량 및 압체압력을 각기 다른 조합으로 접착하여 박리시험과 전단블록시험으로 접착성능을 검토하였다. 실험결과 레조시놀접착제 $500g/m^2$을 도포하고 압체압력 1.5 MPa의 조건으로 제작된 블록접착집성재의 측면접착성능이 가장 양호하였다. 양호한 측면접착조건으로 제작된 블록접착집성재는 동일단면계수의 대조군 집성재와 휨 강도 성능을 비교 검토하였다. 블록접착집성재의 휨 탄성계수는 대조군 집성재와 유사하였으며, 파괴계수는 대조군집성재 보다 27% 향상되었다. 할렬은 대조군집성재 보다 블록접착집성재에서 다량 발생하였으며, 블록접착집성재의 측면접착층에서 계면파괴나 응집파괴는 관찰되지 않았다.

수중 음향센서용 전력증폭기를 위한 멀티레벨 가변전압출력 AC-DC 전원회로 설계 (Design of Multilevel Variable Output Voltage AC-DC Converter for Power Amplifier of Underwater Acoustic Sensor)

  • 이창열;김인동;노의철;문원규;김원호
    • 전력전자학회논문지
    • /
    • 제18권1호
    • /
    • pp.72-83
    • /
    • 2013
  • The paper proposes a new multilevel variable output voltage AC/DC Converter for power supply of power amplifiers used in underwater acoustic sensors. The proposed multilevel variable output voltage AC/DC Converter is composed of two parts. One as the input section is the high efficiency phase-shifted PWM full bridge DC-DC converter to get multiport power sources. The other as the output section is composed of two flying-capacitor 3-level DC-DC converters and a diode bridge circuit to get fast-response and multilevel variable output voltage for an envelope amplifier. Also the paper suggests the detailed circuit topology and design guideline of multilevel variable output voltage AC/DC converter. It also proposes the power balanced control method between 3-level converters and the voltage balanced algorithm for flying capacitors. Its characteristics should be verified by the detailed simulation results. It is anticipated that the proposed converter will be used very well for power amplifiers used in underwater acoustic sensors.

LFFD 및 SFFD를 이용한 3차원 라스트 데이터 생성시스템 개발 (Three Dimensional Last Data Generation System Design Utilizing SFFD and LFFD)

  • 김시경;박인덕
    • 제어로봇시스템학회논문지
    • /
    • 제12권2호
    • /
    • pp.113-118
    • /
    • 2006
  • A new last design approach based on the Limb line FFD (LFFD) and Scale factor FFD (SFFD) is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the measured foot 3D data and last 3D data. Furthermore, the proposed last data generation system utilizes cross sectional data extracted obtained from the measured 3D foot data. First, the last design rule of the LFFD is constructed on the FFD lattice based on foot last shape analysis. Secondly, SFFD is constructed on the LFFD new lattice based on scale factor deformation. The scale factor is constructed on the boundary edges of polygonized patch and the cross section last data boundary edge of the polygon object. Suppose the two boundary curves have been preprocessed so that they run in the same direction and they forms the SF(Scale Factor). In addition, the control points of FFD lattice are derived with cross. sectional data interpolation methods from a finite set of 3D foot data.

제왕절개술시 감염예방을 위한 Cephradine자궁내 세척법과 정맥내 주입법의 비교연구 (Comparative Study of Intrauterine Irrigation and Intravenous Injection with Cephradine at Cesarean Section)

  • 최재동;김종욱;이태형;박완석;이승호;정원영
    • Journal of Yeungnam Medical Science
    • /
    • 제2권1호
    • /
    • pp.203-210
    • /
    • 1985
  • 1985년 3월 1일부터 영남대학교 의과대학 부속병원 산부인과에서 제왕절개술로 분만한 예중 적응이 되는 예에서 Velosef의 자궁강내 세척을 실시한 30예, 정맥주입을 한 35예와 대조군 35예로 총 100예를 연구대상으로 하여 수술후 자궁내막염 및 감염의 발생반도를 비교 분석하였고, 연구대상자에 대한 fever index를 산출 비교하여 다음과 같은 연구 결과를 얻었다. 1. 역학적 변수에서 Velosof 자궁강내 세척군과 Velosef 정맥주입군, 대조군 각각은 통계적으로 유의한 차이를 보이지 않음으로써 세 연구군은 서로 유사하였다. 2. 감염에 대한 위험인자에서도 각 실험군과 대조군은 통계적으로 유의한 차이를 보이지 않음으로써 연구집단은 서로 감염에 대한 위험인자 분포가 유사하였다. 3. 제왕절개술의 적응증에 있어서도 각 실험군과 대조군에서 유사한 분포를 보였으며, 기왕제왕절개술, 아두골반불균형, 둔위 등의 순서로 많았다. 4. 수술후 자궁내막염의 발생반도는 대조군보다 정맥주입군과 자궁강내 세척군이 낮았으며 특히 정맥주입군은 대조군과 통계적으로 유의성을 보였다 ($x^2$=6.248, d.f.=1, P<0.05). 5. 자궁내막염을 포함한 수술후 감염에서도 정맥주입군, 자궁강내 세척군에서 대조군보다 낮은 발생빈도를 보였으며, 특히 정맥주입군에서 대조군과 통계적으로 유의한 차이를 보였다 ($x^2$=5.352, d.f.=1, P<0.05). 6. Fever index는 자궁강내 세척군, 정맥주입군 모두가 대조군에 비해 통계적으로 유의한 차이를 보였다 (t=-3.251, d.f.=68, P<0.05). 7. 수술적응증에 따른 수술후 자궁내막염 발생 빈도에서, 특히 기왕제왕절개술과 아두골반불균형에서 실험군이 대조군에 비해 낮은 경향을 보였다. 8. 감염에 대한 위험인자 별 자궁내막염 발생 빈도에서는 진통이 있는 경우, 6 시간 이상의 양수파막, 5번 이상의 내진, 응급제왕절개술의 경우에 대조군보다 각 실험군에서 자궁내막염 발생 빈도가 현저히 낮았다. 9. 연구대상의 fever index산포도에서 임상적으로 자궁내막염으로 진단된 경우 높은 fever index 수치를 보였다.

  • PDF

3차원파동장에 있어서 복수열불투과성잠제에 의한 파랑제어에 관한 연구 (Wave Control by Multi-Rowed Impermeable Submerged Breakwaters in Three-Dimensional Wave Fields)

  • 김도삼;배은훈;이봉재
    • 한국해양공학회지
    • /
    • 제15권3호
    • /
    • pp.107-113
    • /
    • 2001
  • This study is focused on the wave control by economical multi-rowed impermeable submerged breakwaters which need less materials than a one-rowed submerged breakwater. A boundary element method and eigenfunction expansion method based on the Green\`s theorem are appled to analyze the characteristics of wave transformation. Submerged breakwaters are consisted of one and two-row with rectangular section. Wave transformation characteristics are investigated by the various combinations of placement distance and crown water depth.

  • PDF

육계사료에 항생제 첨가 효과와 경제성에 관한 조사연구 II (the additional effects of antibiotics for the chicken breeding feed and economical efficiency.)

  • 오세정;노순창;정태영
    • 한국가금학회지
    • /
    • 제9권1호
    • /
    • pp.17-33
    • /
    • 1982
  • The purpose of this experiment is to clarify the additional effect of antibiotics for the chicken breeding feed. This experiment was carried out with 6,560 individuals which were collected from four farms, Dugil, Hyubhoi, Sanggog and Kumsan. The duration of this experiment was 6 months from July to December in 1981. 1. Body weight and body gain. (1) The range of the body gain was 1.91-7.60% The most effective sections was T$_3$, and the effect was T$_2$, T$_4$, T$_1$, T$\sub$5/ in order. (2) The environmental sanitation of the Sanggog farm was not so good. In this farm the body gain was severely occurred in T$_3$ and T$_2$ sections. Mere gain obtained from T$\sub$5/ section. (3) The environmental sanitation was good in Dugil, Hyubhoi and Kumsan. A little body gain was occurred in these farms, but differences were shown according to the place or breeds. 2. Amount of feed intake feed conversion ratio. (1) Amount of feed intake was increased 0.13-3.19%, and feed conversion ratio was improved 1.68-4.62% compared with control. T$_3$ section showed high percent and T$_4$ T$_1$, T$\sub$5/, Is, C in order. (2) The keeping method of the chicken breed in Hyubhoi was floor brooding. From Hyubhoi and Sanggog farms, the efficiency was increased 9.4-9.8%. (3) From Dugil and Kumsan, the rate of improvement was low. 3. Mortality : Mortality was merely decreased in Sanggog and Kumsan farms which the sanitary and fowl caring conditions had been had, by additional antibiotics. But there was no worthy effect. 4. The ratio of carcass and the degree of skin coloration. The additional antibiotics in feed had no effect on the ratio of carcass but had the influence on the yellowish skin coloration. Skin coloring was good in T$\sub$7/ section and T$_1$, T$\sub$6/, T$_4$, C, T$_3$, T$\sub$5/, T$_2$ in order. 5. Economical efficiency (1) The addition of the antibiotics in feed increased 3.76-10.95% of gross earning. The highest earning was occurred in T$_4$ section and T$_3$, T$_1$, T$_2$, T$\sub$5/, C sections in order. (2) The earning rate was influenced by the antibiotic products. (3) In Dugil and Kumsan farms, there was no difference in earning, however, in Hyubhoi and Sanggog farms there was wide difference in earning. Conclusionally, the addition of antibiotics in chicken breeding feed is necessary. Especially in bad condition of environmental sanitation and floor brooding, the effect of additional antibiotics is clear. Selection of antibiotics from various kinds, maker's confidence and quality problems are important.

  • PDF

반응부의 유동해석을 통한 열플라즈마 가스처리기의 효율 개선 (A Study in The Efficiency Improvement of Thermal Plasma Gas Processor Through Fluid Dynamics Analysis of Reaction Zone)

  • 서문준;정진도;구경완
    • 전기학회논문지
    • /
    • 제60권3호
    • /
    • pp.669-673
    • /
    • 2011
  • This study explores the numerical analysis method of fluid dynamics in the reaction section to improve the gas processing efficiency in the hazardous gas removal by atmospheric thermal plasma. This study also intends to contribute in technology advance to improve the processing efficiency and make the process more stable. Numerical analysis of temperature distribution in the reaction section dependent on the change in flow velocity of Ar and plasma temperature change, which are major control variables in the cracking process of HFC-23 using arc plasma, was done. The characteristic of incoming oxygen by temperature suggested that when temperature increased to 1600K, 1700K, 1800K respectively, the range of cracking temperature 1500K increased to 75.0%, 83.3%, 90.2% respectively. The temperature change of Ar by velocity change was widest in the area higher than 1500K when the velocity was 2.5m/s; however, since there was no big difference when the velocity was 2m/s, it is believed that 2 m/s would be most proper.

고지도를 활용한 홍수터 복원 구역 선정 및 홍수완충공간의 홍수 저류효과 분석 (Determination of Floodplain Restoration Area Based on Old Maps and Analysis on Flood Storage Effects of Flood Mitigation Sections)

  • 이동진;지운;김상혁;안홍규;장은경
    • Ecology and Resilient Infrastructure
    • /
    • 제10권2호
    • /
    • pp.40-49
    • /
    • 2023
  • 기후변화로 인한 극한홍수의 피해를 저감하면서 동시에 자연친화적 수변구역의 홍수완충공간을 조성하기 위해 제방이 건설되기 이전의 홍수범람 범위와 하천구역을 참조하여 홍수터 복원을 수행할 필요가 있다. 이에 본 연구에서는 금강 대상구간에 대해 고지도를 활용하여 홍수터 복원가능 공간의 입지 선정 방법을 제안하고 홍수터를 홍수완충공간으로 활용할 경우 홍수위 저감 효과를 부정류 수치모의를 통해 분석하였다. 고지도를 활용하여 하천구역 변화를 분석한 결과, 1919년에 비해 2020년 하천구역 면적이 단계적으로 총 27.8% 감소 (1,059,380 m2)한 것으로 추정되었으며, 과거 홍수범람 구역이었던 제내지를 offline 저류지로 복원할 경우 2,200,868 m3의 유효 저류용량을 가지는 것으로 나타났다. HEC-RAS 부정류 모의를 통해 분석한 홍수위와 홍수량 조절 효과는 대상구간의 하류 단면에서 16 cm와 219.01 m3/s인 것으로 나타났다. 본 논문의 수치모의에는 홍수완충공간이 offline 저류지 형식으로 적용되었으며, 제방 후퇴/이설을 통한 홍수터의 확대가 적용될 경우 홍수위 저감 효과는 다르게 나타날 수 있다.

Neutronics analysis of TRIGA Mark II research reactor

  • Rehman, Haseebur;Ahmad, Siraj-ul-Islam
    • Nuclear Engineering and Technology
    • /
    • 제50권1호
    • /
    • pp.35-42
    • /
    • 2018
  • This article presents clean core criticality calculations and control rod worth calculations for TRIGA (Training, Research, Isotope production-General Atomics) Mark II research reactor benchmark cores using Winfrith Improved Multi-group Scheme-D/4 (WIMS-D/4) and Program for Reactor In-core Analysis using Diffusion Equation (PRIDE) codes. Cores 133 and 134 were analyzed in 2-D (r, ${\theta}$) and 3-D (r, ${\theta}$, z), using WIMS-D/4 and PRIDE codes. Moreover, the influence of cross-section data was also studied using various libraries based on Evaluated Nuclear Data File (ENDF/B-VI.8 and VII.0), Joint Evaluated Fission and Fusion File (JEFF-3.1), Japanese Evaluated Nuclear Data Library (JENDL-3.2), and Joint Evaluated File (JEF-2.2) nuclear data. The simulation results showed that the multiplication factor calculated for all these data libraries is within 1% of the experimental results. The reactivity worth of the control rods of core 134 was also calculated with different homogenization approaches. A comparison was made with experimental and reported Monte Carlo results, and it was found that, using proper homogenization of absorber regions and surrounding fuel regions, the results obtained with PRIDE code are significantly improved.