• Preventive Nutrition and Food Science
• /
• v.17 no.1
• /
• pp.36-45
• /
• 2012

To produce novel cheese-like fermented soybean, the solid-state fermentation of roasted soybean flour (RSF) was performed using 1.0% inoculum Bacillus subtilis HA and Lactobacillus plantarum, with the initial 60% substrate moisture for 10 hr at $42^{\circ}$, resulting in pH 6.5, 0.82% acidity, 3.5% mucilage, 14.3 unit/g protease activity, 7.6 unit/g fibrinolytic activity, 216 mg% tyrosine content and $1.7{\times}10^{10}$ CFU/g of viable cell counts. After the second lactic acid fermentation with 10~30% skim milk powder, the fermented RSF resulted in an increase in acidity with 1.64~1.99%, tyrosine content with 246~308 mg% and protease activity in the range of 5.2~17.5 unit/g and 0.966 water activity. Viable cell counts as probiotics indicated $1.6{\times}10^8$ CFU/g of B. subtilis and $7.3{\times}10^{10}$ CFU/g of L. plantarum. The firmness of the first fermented RSF with 2,491 $g{\cdot}{\o}mm^{-1}$ greatly decreased to 1,533 $g{\cdot}{\o}mm^{-1}$ in the second fermented RSF, although firmness was slightly increased by adding a higher content of skim milk. The consistency of the second fermented RSF also decreased greatly from 55,640 to 3,264~ 3,998 in the presence of 10~30% skim milk. The effective hydrolysis of soy protein and skim milk protein in the fermented RSF was confirmed. Thus, the second fermented RSF with a sour taste and flavor showed similar textural properties to commercial soft cheese.

• Korean Journal of Acupuncture
• /
• v.35 no.3
• /
• pp.117-122
• /
• 2018

Objectives : Most meridians have each well point located at the distal end of fingers or toes, congruous with their meridian courses. Exceptively, ST45(Yeotae), stomach meridian(ST)'s final point, is located at the lateral side of the tip of the second toe, while the tip of the second toe was not mentioned in the course of ST. So, we studied the course of lower limb region of ST. Methods : Courses of ST in Categorized Collection of Literatures on Chinese Meridians and Collaterals(CCM) was examined. The literatures included in CCM was selected as study subjects to be studied if the meridian route was different from "Youngchu" or more detailed notes were attached. There are 3 branches in lower limb region of ST, we analyzed theories of scholars of all time about the 3 branches of ST. Results and Conclusions : Branch 1 descends along the lateral margin of the fibula to the dorsum of foot, entering into the medial side of the middle toe. Branch 2 leaves ST36 separately, terminating at the lateral side of the middle toe. Branch 3 leaves ST42 and descends to the end of the great toe. The medial side of the middle toe equate to the lateral side of the second toe, and it is connected to ST45. So branch 1 is the main stream of ST. Branch 3 drives to the great toe passing between first and second toe, it goes medial side of LR2.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.4
• /
• pp.343-350
• /
• 2003

Using Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ powders prepared by solid state reaction and spray drying method, the nucleation and growth behaviors of superconducting and second phases were investigated during isothermal heat treatment. When the spray drying power was used in contrast with solid state reaction powder, Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2223) phase could be formed at the relatively shot time and second phases were much bigger. Quantitative analysis showed that as the heat treatment time increased, more Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2212) changed to 2223 and the major second phase was changed from (Sr,Ca)$_{14}$Cu$_{24}$ $O_{x}$(14:24) to (Sr,Ca)$_2$Cu$_1$ $O_{x}$ (2:l). The superconducting phase formed at the relatively short time 14:24 phase. Following the Bi-free phase of 14:24 Phase, but long time was needed in places far from the 14:24 phase. Following the formation of the 2212 phase near the 14:24 phase, the 2223 phase nucleated preferentially at the interface between the 2212 and 14:24 phases. The preferential nuclcation of 2223 was explained by its structural similarity and low Interfacial energy with both the Bi-free and 2212 Phases.12 Phases.

• Geomechanics and Engineering
• /
• v.28 no.5
• /
• pp.437-454
• /
• 2022

The hydro-mechanical (HM) two-way sequential coupling in the TOUGH2-FLAC3D linking algorithm is validated completely and successfully in both M to H and H to M directions, which are initiated by mechanical surface loading for geomechanical validation and hydrological groundwater pumping for hydrogeological validation, respectively. For such complete and successful validation, a TOUGH2-FLAC3D linked numerical model is developed first by adopting the TOUGH2-FLAC3D linking algorithm, which uses the two-way (fixed-stress split) sequential coupling scheme and the implicit backward time stepping method. Two geomechanical and two hydrogeological validation problems are then simulated using the linked numerical model together with basic validation strategies and prerequisites. The second geomechanical and second hydrogeological validation problems are also associated with the Mandel effect and the Noordbergum and Rhade effects, respectively, which are three phenomenally well-known but numerically challenging HM effects. Finally, sequentially coupled numerical solutions are compared with either analytical solutions (verification) or fully coupled numerical solutions (benchmarking). In all the four validation problems, they show almost perfect to extremely or very good agreement. In addition, the second geomechanical validation problem clearly displays the Mandel effect and suggests a proper or minimum geometrical ratio of the height to the width for the rectangular domain to maximize agreement between the numerical and analytical solutions. In the meantime, the second hydrogeological validation problem clearly displays the Noordbergum and Rhade effects and implies that the HM two-way sequential coupling scheme used in the linked numerical model is as rigorous as the HM two-way full coupling scheme used in a fully coupled numerical model.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.137-142
• /
• 2015

We retrospectively analyzed the outcomes in patients who underwent reirradiation for brain metastasis. Twenty-three patients with brain metastases who were initially treated with palliative brain radiotherapy and were retreated with a second course of brain RT between June 2008 and December 2012. WBRT, 3DCRT and SRS were used for brain metastasis. The median dose of the first course of WBRT was 30 Gy (range, 23.4~30 Gy). The dose of the first course 3DCRT for lesion was 30 Gy in 3 Gy per fraction. The median dose of the first course of SRS was 16 Gy in 1 fraction (range, 12~24 Gy). The median dose of the second course of WBRT was 27.5 (range, 12~30 Gy). The median dose of the second course of 3DCRT for lesion was 30 Gy (range, 25~30 Gy). The dose of the second course of SRS was 16 Gy in 1 fraction. The second course of WBRT was administered on radiographic disease progression with symptom in all patients. With median follow-up of 25 months, overall symptom resolution rates were 47.8%. Rate of palliative efficacy was 82.6% including stable disease. The median survival time after initiation of reirradiation was 3.2 months. Median value of KPS prior to reirradiation was 30. Median value of KPS after reirradiation was 60. Reirradiation of brain metastasis maybe feasible and effective in select patients with a good performance status $KPS{\geq}60$ (: ECOG 0~2) prior to reirradiation.

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.835-844
• /
• 2002

For the one-way random model when the ratio of the variance components is of interest, Bayesian analysis is often appropriate. In this paper, we develop the noninformative priors for the ratio of the variance components under the balanced one-way random effect model. We reveal that the second order matching prior matches alternative coverage probabilities up to the second order (Mukerjee and Reid, 1999) and is a HPD(Highest Posterior Density) matching prior. It turns out that among all of the reference priors, the only one reference prior (one-at-a-time reference prior) satisfies a second order matching criterion. Finally we show that one-at-a-time reference prior produces confidence sets with expected length shorter than the other reference priors and Cox and Reid (1987) adjustment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.3
• /
• pp.293-300
• /
• 2007

The aim of this paper is to design a speed controller of a DC motor by selection of a PID parameters using genetic algorithm. The model of a DC motor is considered as a typical non-oscillatory, second-order system, And this paper compares three kinds of tuning methods of parameter for PID controller. One is the controller design by the genetic algorithm. second is the controller design by the model matching method third is the controller design by Ziegler and Nichols method. It was found that the proposed PID parameters adjustment by the genetic algorithm is better than the Ziegler & Nickels' method. And also found that the results of the method by the genetic algorithm is nearly same as the model matching method which is analytical method. The proposed method could be applied to the higher order system which is not easy to use the model matching method.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.3
• /
• pp.201-222
• /
• 2011

In the present work, the mathematical model of wire coating in a straight annular die is developed for unsteady second grade fluid in the form of partial differential equation. The Optimal Homotopy Asymptotic Method (OHAM) is applied for obtaining the solution of the model problem. This method provides us a suitable way to control the convergence of the series solution using the auxiliary constants which are optimally determined.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.89-89
• /
• 2004

It is believed that age controls horizontal-branch (HB) morphology of Globular Clusters besides metallicity (first parameter). However, other second parameter candidates, such as He abundance and alpha elements enhancement, could also affect HB morphology. These effects may influence to the age measurements from the main-sequence turnoff (MSTO) as well. We will measure the variations of age caused by each second parameter candidate at HB and MSTO respectively, using the well known second parameter pair M3 and Ml3. (omitted)