• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.147-150
• /
• 2008

We have developed a 3.1-inch diagonal 2D/3D LCD with a novel pixel arrangement, called HDDP (Horizontally Double-Density Pixels), for high-quality 3D images. We have improved 3D visibility by broadening the 3D viewing zone where high-quality images can be seen, and we propose optical characterization methods which can evaluate the high-visibility autostereoscopic displays correctly.

• 한국주조공학회지
• /
• 제25권4호
• /
• pp.156-160
• /
• 2005

There are many factors that influence solidification behavior during continuous casting, e.g. include superheat, casting speed, cooling rate and holding time. However, when melt is stirred by electromagnetic force, there would be some changes in its solidification behavior compared to that of the ordinary casting process. In this study, the billets of A356 alloy with a diameter of 3 inch were fabricated with electromagnetic stirring under various conditions of superheat, casting speed and input voltage of electro magnetic stirring (EMS) device. The microstructure was also investigated under the various casting conditions and electromagnetic input voltages. When increase in input voltage, the microstructure was changed from dendritic to rosette type and finally to spheroidal. With pouring temperature, casting speed and electromagnetic input voltage were $650^{\circ}C$, 100 mm/min and 140 V, respectively, the billet with a diameter of 3 inch, which has a uniform dispersed spheroidal particles in the whole area of billet except for the surface area, was manufactured.

• 대한치과교정학회지
• /
• 제13권2호
• /
• pp.155-163
• /
• 1983

Many different appliances have been used to move teeth or to attempt to inhibit or stimulate growth of the jaws. Especially, Orthopedic force was used to apply a constant force on the mandible. Various orthopedic forces bring the changes of surrounding tissue, growth and development on the mandibular joint. Author carried out this study to find the histological changes of the mandibular joint in rats when the mandible applied posterior displacement. For the purpose of this study, $009\times036inch$ closed coil spring and 030inch orthopedic wire were used between the post occipital region and the chin region in order to render the orthopedic forces, posteriorly. The experimental animals vu. used 1 month old (GroupI), 3 months old (Group II), and 12 months old (Group III) rats. Following results were obtained; 1. At the beginning of the experimental Group I, there were predominant increment of Cartilage layer in the posterior parts of condylar head. Especially, the mature chondrocyte zone was increased. 2. In the experimental Group II, the chondroblastic zone was decreased while it showed slightly increased mature cartilage zone. 3. In the experimental Group III, the mature chondrocyte zone was disappeared gradually and there was a tendency to reduce the endochondral bone formation in condylar head. 4. After 30 days of experimental Group I and in experimental Group II, there was a tendency to decrease the immature cellular zone in the glenoid fossa by pressure. 5. There were no histological changes in the articular disc by pressure.

• 한국레이저가공학회지
• /
• 제17권3호
• /
• pp.19-23
• /
• 2014

To directly engrave circuit-line patterns as wide as $6{\mu}m$ in a buildup film to be used as an IC substrate, we applied a projection ablation technique in which an 8 inch dielectric ($ZrO_2/SiO_2$) mask, a DPSS 355nm laser instead of an excimer laser, a ${\pi}$-shaper and a galvo scanner are used. With the ${\pi}$-shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam. The galvo scanner before the $f-{\theta}$ lens moves the flat-top beam ($115{\mu}m{\times}105{\mu}m$) across the 8 inch dielectric mask whose patterned area is $120mm{\times}120mm$. Based on the results of the previous research by the authors, the projection ratio was set at 3:1. Experiments showed that the average width and depth of the engraved patterns are $5.41{\mu}m$ and $7.30{\mu}m$, respectively.

• 조명전기설비학회논문지
• /
• 제24권3호
• /
• pp.8-13
• /
• 2010

For better picture quality in LCD TVs, it is important to reach a steady emitting state within as short a time as possible in the initial stage after the TV is turned on. The initial characteristics of LCD TVs are mainly determined by the properties of the backlight. In the present study, the photometric and spectroscopic properties of a 55-inch Cold Cathode Fluorescent Lamp (CCFL) and Light Emitting Diode (LED) backlights were investigated. The measured properties include time dependence of the spectrum, luminance, and color coordinates. The results show that the change in the spectroscopic properties of the LED backlight is smaller than that of the CCFL backlight. This indicates that the initial picture quality of the LCD TV with the LED backlight is superior to that with the CCFL backlight. The origins of this difference were discussed in relation to the inherent characteristics of the two light sources.

• 한국통신학회논문지
• /
• 제35권2B호
• /
• pp.197-209
• /
• 2010

본 논문은 10 Gb/s $\times$ 4 레인으로 구성되는 40 인치 FR-4 백플레인 채널을 설계 및 분석하고, 이를 바탕으로 제안된 40 Gb/s 급 수신 적응 등화기 (Receive and Adaptive Equalizer), 고속 등화 알고리즘 설계 및 시뮬레이션 결과에 관하여 기술한다. 백플레인을 통과하는 40 Gb/s 고속 데이터 통신 채널을 위해 FFF를 사용하지 않는 DFE의 10Gb/s 4채널의 수신 등화기가 제안된다. 본 수신 & 등화기는 46 인치 백플레인 채널의 수신종단에서 등화를 수행하기 위한 IEEE Std P802.3ba 표준 기반 등화기 요구조건을 만족한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.870-873
• /
• 2003

We have fabricated a carbon nanotube field emission display(CNT FED) panel with a 2 inch diagonal size by using screen printing method and vacuum in-line sealing technology. The sealing temperature of the panel was around 390 $^{\circ}C$ and the leak test was carried out for 72 hrs after sealing process. When field emission properties of fabricated and sealed CNT FED panel were characterized and compared with those of unsealed panel which was located in vacuum chamber of vacuum level similar with the sealed panel, the sealed panel showed more improved field emission properties.

• 방송공학회논문지
• /
• 제20권6호
• /
• pp.928-937
• /
• 2015

기존의 헤드업 디스플레이는 작은 허상 크기로 인하여 운전자가 영상 정보를 쉽게 인식할 수 없는 어려움을 가지고 있기 때문에, 본 연구에서는 수평 방향으로 영상을 넓히는 다중 화면 구조와 컴바이너 렌즈를 사용하여 영상 확대와 다채널 윈도우 구조의 헤드업 디스플레이를 연구하였다. 0.47inch 크기의 LCD를 사용하여 투과와 반사 기능의 허상 영상을 사람의 눈에서 3m 위치에 구현하는 기술을 연구하여 근거리와 원거리의 물체에 대한 운전자의 인지 시간을 짧게 하였다. 허상 영상의 콘텐츠로는 스마트 폰을 이용하여 다양한 내비게이션 정보 등을 디스플레이 할 수 있도록 하여 안전과 정보를 동시에 제공할 수 있도록 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.51-54
• /
• 2007

Top-emission 3.5 inch qVGA IOD (Inverted AMOLED) was fabricated with inverted EL structure driven by a-Si TFT backplane. In order to get stable driving TFT, we used FCP(Field Control Plate) layer which was connected with the source of the driving TFT. And we developed planarization process to planarize the cathode layer which was the bottom layer of inverted OLED. Our unique IOD structure is “a-Si TFT/ Al(Cathode)/ LiF/ LG-201(ETL)/ EML(RGB)/ HTL/ LG-101(HIL & Buffer layer)/ IZO(Anode)”. LG-201(ETL) layer was studied for more efficient electron injection from cathode to EML, and LG-101(HIL & Buffer layer) covered by IZO anode was also explored for decreasing the EL surface damage.

• Elastomers and Composites
• /
• 제55권3호
• /
• pp.222-228
• /
• 2020

Rubber materials, used in nuclear power plants, need high heat-oxidation resistance to curing or cracking under a heat aging environment. This is because they are applied to environments with high temperature, high humidity, and radiation exposure. Nuclear radiation causes additional hardening or degradation, therefore, rubber materials need radiation resistance that satisfies the general and any accidental conditions produced in the power plant. Therefore, in this study, we developed a rubber material with excellent heat and radiation resistance for the diaphragm seal of a nuclear steam generator nozzle dam. The rubber material greatly improved the reliability of the steam generator nozzle dam. In addition, 30 inch and 42 inch diaphragm seals were manufactured using the developed rubber material. A nozzle dam was installed in a nuclear power plant and tested under the same conditions as a steam generator to evaluate safety and reliability. In the future, the performance and safety of diaphragm seals developed through field tests of nuclear power plants will be evaluated and applied to currently operating and new nuclear power plants.