• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.453-460
• /
• 2000

A test rig is developed for performance test of 1 stage axial-type turbine which is designed by meanline analysis, streamline curvature method, and blade design method using configuration parameters. The purpose of this study is to find the best configuration parameters for designing a high efficiency axial-type turbine blade. To measure the efficiency of turbine stage, a dynamo-meter is installed. Two different stators which are manufactured as an integrated type are developed, and a rotor blade and 5 sets disc are developed for setting different stagger angle. The tip and hub diameters of the test turbine are 300 and 206.4mm, respectively. The rotating speed is 1800RPM, and the extracted power is 2.5kW. Flow coefficient is 1.68 and the reaction factor at meanline is 0.373. The number of stator and rotor of test turbine are 31 and 41, respectively. The Mach number of stator exit flow near hub is 0.164.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.58-63
• /
• 2005

Three-dimensional vortical structures in the wake behind a road vehicle has been visualized with the help of two-dimensional PIV measurement data. A three-dimensional velocity field has been reconstructed from several sectional measurement data in the x-y, y-z and z-x planes. Isovorticity surface observed by stacking only the sectional data in each plane, does not show the vortical structures within the recirculation region but represents only the strong shear flows. Thus, in the present study, the velocity component normal to the x-y plane is obtained by interpolating those velocities in the z-x plane. Then, a $\lambda_{2}$-definition which captures the local pressure minimum or vortex core, is applied to visualize the vortices in the recirculation region. The final results represent a successful configuration for the three-dimensional vortices.

• 오토저널
• /
• 제10권2호
• /
• pp.61-69
• /
• 1988

The finite-difference three-dimensional boundary layer procedure of Chang and Patel is modified and applied to solve the boundary layer development on the automobile surface. The inviscid pressure distribution needed to solve the boundary layer equations is obtained by using a low order panel method. The plane of symmetry boundary layer exhibits the strong streamline divergence up to the midbody and convergence thereafter. The streamline divergence in front of the windshield helps the boundary layer to overcome the sever adverse pressure gradient and avoid the separation. The relaxation of the pressure right after the top of the wind-shield, on the other hand, makes the overly thinned boundary layer to readjust and prompts the streamlines to converge into the symmetry plane before the external streamlines do. The three-dimensional characteristics are less apparent after the midbody and the boundary layer is similar to that of the two-dimensional flow. The results of the off-plane-of-symmetry boundary layer are also presented.

• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.435-444
• /
• 2006

본 논문은 AREA법을 사용하는 줄눈 콘크리트포장의 평가에 3차원 유한요소모델을 사용하는 경우 나타나는 특성을 조사하는데 목적이 있다. 이를 위해 실제 콘크리트포장을 거동을 반영할 수 있는 3차원 유한요소모델을 구축하였고 2차원 모델과 비교한 후 민감도 분석을 수행하였다. ILLISLAB을 사용한 2차원 모델과 비교하였고 하중형태의 영향 보다 하중재하 지점의 자체수축과 기층모델에 따른 영향을 더 많이 받는 것으로 나타났다. 3차원 모델에서 비선형 온도구배를 선형 온도구배로 변화시키는 경우 발생하는 영향을 조사하였고 큰 차이를 보이지는 않았으나 지반 탄성계수가 작아질수록 더 많은 차이를 보였다. 동적하중에 의한 처짐을 구하였고 정적하중에 의한 처짐과 비교한 결과 낮은 지반 탄성계수에서는 동적하중에 의한 처짐이 작게 나타났으나 높은 지반 탄성계수에서는 동적하중에 의한 처짐이 크게 나타났다. 동적하중에 의한 처짐 이력을 구하고 AREA법을 이용하여 동적지지력과 탄성계수를 역산하였으며 이를 정적 처짐에 의한 결과와 비교하였다. 그 결과 동적지지력의 경우 정적 해석에 의한 값보다 동적해석에 의한 값이 낮게 나타났고 탄성계수의 경우 반대의 경향을 나타내어 현장에서 AREA법을 사용하는 경우 나타나는 평가결과의 특성을 설명하는 것으로 판단되었다.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1987년도 식물생명공학 심포지움 논문집 Proceedings of Symposia on Plant Biotechnology
• /
• pp.149-155
• /
• 1987

Growth and development of a higher plant, or any living organism for that matter, could be defined as an orderly expression of the genome in time and space in close interaction with the environment. During differentiation and development of a tissue or organ a group of genes must be selectively turned on or turned off mainly by trans-acting regulators. In this general concept of regulation of regulation of gene expression, a DNA molecule is recognized at a specific nucleotide sequence by DNA-binding factors. Molecular biology of the regulatory factors such as hormones, and their receptors, target DNA sequences and DNA-binding proteins are well advanced. What is not clearly understood is the molecular basis of the interactions between DNA and binding factors, expecially of the usages of the dyad symmetry of the target DNA sequences and the dimeric nature of the DNA-binding proteins. A unique 3-dimensional structure of DNA has been proposed that may play an important role in the orderly expression of the gene. A foldback intercoil (FBI) DNA configuration which was originally found by electron microscopy among mtDNA molecules from pearl millet has some unique features. The FBI configuration of DNA is believed to be formed when a flexible double helix folds back and interwines in the widened major grooves resulting in a four stranded, intercoil DNA whose thickness is the same as that of double stranded DNA. More recently, the FBI structure of DNA has been also induced in vitro by a novel enzyme which was purified from pearl millet mitochondria. It has been proposed that the FBI DNA could be utillized in intramolecular recombination which leads to inversion or deletion, and in intermolecular recombination which can lead to either site-specific recombination, genetic recombination via single strand invasion, or cross strand recombination. The structure and function of DNA in 3-dimensional aspect is emphasized for better understanding orderly expression of genes during growth and development.

• 제어로봇시스템학회논문지
• /
• 제12권3호
• /
• pp.300-306
• /
• 2006

In this paper an error analysis of 3-dimensional GNSS attitude determination system is given. The attitude error covariance matrix is derived and analyzed. It implies that attitude errors are affected by the baseline length and configuration, the satellites numbers and geometry, receiver measurement noises and the nominal attitude of the vehicle. By defining Euler Angle Dilution Of Precision (EADOP) which is analogous to GDOP, roll, pitch and yaw errors can be efficiently analyzed. However the expression of the attitude error is too complex to get some intuitions. Therefore with a commonly adopted assumption, new expressions for attitude error are derived. The formulas are easy to compute and represent the attitude error as a function of the nominal attitude of a vehicle, the baseline configuration and the receiver noise. Using the formula, the accuracy of the attitude can be analytically predicted without the computer simulations. Applications to some widely used configurations reveal the effectiveness of the proposed method.

• 한국건설관리학회논문집
• /
• 제13권6호
• /
• pp.94-106
• /
• 2012

최근 국내외적으로 활발히 추진되고 있는 복합용도 도시재생사업의 경우, 사업초기 계획의 불확실성, 자금조달의 어려움, 사업비 증가 및 사업기간 지연 등으로 인하여 리스크 및 불확실성이 증가되고 있는 추세이다. 이처럼 급격한 사회 경제적 변화에 대응하고 리스크 감소를 통한 주체별 편익의 최적화를 유도하기 위해서는, 사업초기단계에서의 정확한 계획과 함께 사업의 생애주기를 고려한 리스크 기반의 변화관리 프로세스가 요구된다. 또한 변화관리 프로세스는 업무프로세스와 연계하여 변화요인 대한 측정 및 평가, 대응할 수 있는 방안이 마련되어야 한다. 하지만 건설분야에서의 변화관리에 관한 연구는 조직, 리더쉽, 사상 등의 인문/사회학적 측면에 국한되어 이루어지고 있다. 따라서 본 연구에서는 복합용도 도시재생사업에서의 체계적인 변화관리를 수행하기 위하여 리스크 기반의 변화요인을 추출할 수 있는 MECA(Metrix for Evaluation of Risk based Configuration factors Alternatives)방법론과 변화에 대한 사업비, 사업기간, 리스크를 통합하여 평가할 수 있는 3DAM(Three-Dimensional Area Measurement Method)과 CII(Configuration Innovation Index) 방법론을 개발하여, 변화에 유기적으로 대응할 수 있는 변화관리 프로세스를 제안하였다.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.97-104
• /
• 2005

Vision-based lane sensing systems require accurate and robust sensing performance in lane detection. Besides, there exists trade-off between the computational burden and processor cost, which should be considered for implementing the systems in passenger cars. In this paper, a stereo vision-based lane detection system is developed with considering sensor configuration aspects. An inverse perspective mapping method is formulated based on the relative correspondence between the left and right cameras so that the 3-dimensional road geometry can be reconstructed in a robust manner. A new monitoring model for estimating the road geometry parameters is constructed to reduce the number of the measured signals. The selection of the sensor configuration and specifications is investigated by utilizing the characteristics of standard highways. Based on the sensor configurations, it is shown that appropriate sensing region on the camera image coordinate can be determined. The proposed system is implemented on a passenger car and verified experimentally.

• Archives of Plastic Surgery
• /
• 제40권3호
• /
• pp.192-197
• /
• 2013

Background To construct a sophisticated three-dimensional framework, numerous modifications have been reported in the literature. However, most surgeons have paid little attention to the anatomical configuration of the concha and more to its deepness and hollowness, leading to unsatisfactory outcomes. Methods For a configuration of the concha that is definitely anatomical, the author further developed and employed the conchal bowl element, which has been used by several surgeons although the results have not been published elsewhere. The author constructed the conchal bowl element in one of three patterns according to the amount of available cartilages: one block, two-pieces, or a cymba bowl element only. A total of 20 patients underwent auricular reconstruction using a costal cartilage framework between 2009 and 2012. The 8 earliest reconstructions were performed without a conchal bowl element and the latter 12 with a conchal bowl element. The patients were followed up for more than 1 year. The aesthetic results were scored by evaluating characteristics involving the stability of the crus helicis, the conchal definition, and the smoothness of the helical curve. Results The ears reconstructed early without a conchal bowl element showed a shallow and one or two incompletely separated concha with an obliterated cymba conchal space. They also did not have a realistic or smooth curve of the helix because of an unstable crus helicis. However, ears reconstructed later with the concha bowl element showed a definite crus helicis, deep cymba conchal space, and smooth helical curve. Conclusions The construction of the conchal bowl element is simple, not time-consuming procedure. It is suggested that the conchal bowl element must be constructed and attached to the main framework for natural configuration of the reconstructed ear.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.711-725
• /
• 2014

The purpose of this study is to evaluate the behavior and the strength of SRG (Steel Reinforced Grout) externally strengthened Reinforced Concrete (RC) beams by using a nonlinear numerical analysis. The numerical simulation was carried out by using a three-dimensional (3D) finite element model. An interface element with a suitable damage model was used to model the connection between concrete surface and SRG reinforcing layer. The reliability of the finite element 3D-model was checked using experimental data obtained on a set of three RC beams. The parameters taken into consideration were the external configuration, with or without U-end anchorages, the concrete strength, the amount of internal tensile steel reinforcement. Conclusions were made concerning the strength and the ductility of the strengthened beams by varying the parameters and on the effectiveness of the SRG reinforcing system applied with two types of external strengthening configuration.