• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.241-244
• /
• 2006

본 논문은 지구자계를 이용하여 3축 자계센서의 수직 성분자계를 보정하는 방법과 장치를 제안한다. 자계센서는 설치각도 및 이득오차에 의해 출력 특성이 변화한다. 따라서 자계센서를 사용하기에 앞서 보정이 필요하다. 지구에서 발생되는 지구자계를 이용하여 간편하게 센서의 설치각도 및 이득오차에 의한 영향을 보정하였으며 이를 위한 장치를 설계하였다. 제안한 방법은 실험을 통하여 실용성을 검증하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.3
• /
• pp.297-302
• /
• 2006

In this paper, a method and system to compensate vertical component of 3-dimensional magnetic field sensor using the earth's field was described. Output of magnetic field sensor have a output offset that is generated setting angle error of magnetic sensor and gain error. Thus, to using the magnetic field sensor, it must be compensated. The compensation of magnetic field sensor is required at shield space. However, using the earth's field, output offset of the sensor can be simply compensated. And, we designed system for compensation of the sensor. The proposed method and system are verified usefulness through experimental.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.643-651
• /
• 2015

Multi-axis magnetic and accelerometer sensor are widely used in consumer product such as smart phones. The vector output of multi-axis sensors have errors on each axis such as offset error, scale error, non-orthogonality. These errors cause many problems on the performance of the applications. In this paper, we designed the effective inline compensation algorithm for calibrating of 3 axis sensors using ellipsoid for mass production of multi-axis sensors. The outputs with those kinds of errors can be modeled by ellipsoid, and the proposed algorithm makes sequential mappings of the virtual ellipsoid to perfect sphere which is calibrated function of the sensor on three-dimensional space. The proposed calibrating process composed of four main stages and is very straightforward and effective. In addition, another imperfection of the sensor such as the drift from temperature can be easily inserted in each mapping stage. Numerical simulation and experimental results shows great performance of the proposed compensation algorithm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.1-11
• /
• 2008

This paper proposes a real-time method using a 3-axis accelerometer to enhance blurred images taken from a camera loaded in mobile devices. Blurring phenomenon is a smoothing effect occurring in photo images. Algorithms to cope with blurring phenomenon is essential since small-size mobile devices tremble severely by even a tiny hand-shaking of a user. In this paper, accurate sensing characteristics of the 3-axis accelerometer is acquired by applying the sensor in pendulum motion and the blurring phenomenon is modeled as a uniform distribution and Gaussian distribution. Also, non-Gaussian distributed model is observed in the experiment of real blurring phenomenon and a particular deblurring function is designed by reversing the model. It has been demonstrated that the application of trembling information to the deblurring function adequately removes the blurring phenomenon.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1779-1785
• /
• 2018

In this paper, we propose an error correction method to improve the accuracy of human activity recognition using sensor event data obtained by smart devices such as wearable and smartphone. In the context awareness through the smart device, errors inevitably occur in sensing the necessary context information due to the characteristics of the device, which degrades the prediction performance. In order to solve this problem, we apply Kalman filter's error correction algorithm to compensate the signal values obtained from 3-axis acceleration sensor of smart device. As a result, it was possible to effectively eliminate the error generated in the process of the data which is detected and reported by the 3-axis acceleration sensor constituting the time series data through the Kalman filter. It is expected that this research will improve the performance of the real-time context-aware system to be developed in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.89-98
• /
• 2009

CMG cluster which consists of four CMGs can be used to produce 3-axis torque. There are many issues that we have to investigate and validate when CMG cluster itself is developed. Thus, its ground validation and verification processes are essential. Therefore, CMG simulator which uses a torque sensor to calculate satellite attitude is proposed in this paper. Update and kalman filter are also proposed for gimbal angle problem occurred in development. The first way uses a calculated gimbal angle as a primary and a sensor angle as a scondary to reduce error. Also, the test results of specific CMG steering law as well as attitude control logic are presented as an example.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.2
• /
• pp.79-84
• /
• 2014

The precision aerial application of agricultural unmanned helicopters has become a new paradigm for small farms with orchards, paddy, and upland fields. The needs of agricultural applications require easy and affordable control systems. Recent developments of MEMS technology based on inertial sensors and high speed DSP have enabled the fabrication of low-cost attitude system. Therefore, this study evaluates inertial MEMS sensors for estimating the attitude of an agricultural unmanned helicopter. The accuracies and errors of gyro and acceleration sensors were verified using a pendulum system. The true motion values were calculated using a theoretical estimation and absolute encoder measurement of the pendulum, and then the sensor output was compared with reference values. When comparing the sensor measurements and true values, the errors were determined to be 4.32~5.72%, 3.53~6.74%, and 3.91~4.16% for the gyro rate and x-, z- accelerations, respectively. Thus, the measurement results confirmed that the inertial sensors are effective for establishing an attitude and heading reference system (AHRES). The sensors would be constructed in gimbals for the estimating and proving attitude measurements in the following paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.53-58
• /
• 2017

A fine stage is developed for the 3-DOF error compensation of a linear axis in order to improve the positioning accuracy. This stage is designed as a planar parallel mechanism, and the joints are based on a flexure hinge to achieve ultra-precise positioning. Also, the effect of Abbe's offsets between the measuring and driving coordinate systems is minimized to ensure an exact error compensation. The mode shapes of the designed stage are analyzed to verify the desired 3-DOF motions, and the workspace and displacement of a piezoelectric actuator (PZT) for compensation are analyzed using forward and inverse kinematics. The 3-DOF error of a linear axis is measured and compensated by using the developed fine stage. A marked improvement is observed compared to the results obtained without error compensation. The peak-to-valley (PV) values of the positional and rotational errors are reduced by 92.6% and 91.3%, respectively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.3
• /
• pp.216-220
• /
• 2009

In this paper we propose a motion recognition method for handheld controller 3-D acceleration signals, generated by 3 axis accelerometer in the controller, are transmitted to the computer by Bluetooth communication. We extract motion segments from continuous acceleration signals and apply to each motion model, which is trained in training phase. Hidden Markov Model was used to model each motion. We applied proposed method to three motion sets, the recognition result was good enough to practical use.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.199-206
• /
• 2012

Attempt to use as a marker of natural objects directly in the real world, but there is a way to use the accelerometer of the smartphone, to convert the Frontal-View virtual, because it asks only the pitch of the camera, from the side there is a drawback that can not be converted to images. The proposed algorithm, to obtain the rotation matrix of axis 3 pitch, roll, yaw, we set the reference point of the yaw of the target image. Then, to compensate for the rotation matrix to determine Myon'inji any floor, wall, the ceiling of the target image. Finally, to obtain the homography matrix for obtaining the Frontal-View to account for the difference between the gyro sensor coordinate system and image coordinate system, so we can get the Frontal-View from the captured images through the projection transformation was designed. Was tested to convert Frontal-View the picture was taken in an environment smartphone environment surrounding floor, walls and ceiling in order to evaluate the conversion program Frontal-View has been implemented, in this paper, design and The conversion algorithm implementation, it was confirmed that to convert a regular basis Frontal-View footage taken from multiple angles.