• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.20-27
• /
• 2017

The aim of this paper is to present the modulus of elasticity of $E_L$, $E_R$, $E_T$ along three principal axis of softwood dimension lumber by nondestructive method. Ultrasonic measurement was carried out on defect free wood samples taken by the Japanese Larch, SPF (spruce-pine-fir) and Hem-fir $2{\times}4s$. The ultrasound velocities were measured to calculate young's moduli and it was derived elastic constants for each wood samples using the ultrasound velocities and densities of wood. From the test, $E_L$ was much greater than $E_R$ and $E_T$. $E_R/E_T$ ratios were about 1.3. The high density wood had high young's moduli in three principal axis and the difference in young's moduli between species was greater in transverse direction than longitudinal direction. The anisotropy of the lumber was presented through the calculated elastic moduli and compliances matrix in diagonal term were determined by inverting the stiffness matrix.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.233-233
• /
• 2012

위상절연체(Bi2Te3)와의 격자상수 불일치 비율이 서로 다른 Si (111)와 Ge (111) 기판을 선택하여 Bi3Te3 박막의 성장 조건을 찾고 이에 따른 특성 분석을 수행하였다. 시료 제작은 초고진공 분위기에서 MBE를 이용하였고, AFM, XRD와 XPS로 각각 구조적 변화, 결정 상태 및 화학적 상태를 분석하였다. 우선 Si 위에 형성된 Bi2Te3의 경우, 초기 박막이 형성된 후, 증착 시간이 증가함에 따라 섬(island)모양의 구조물들이 step edge 부분에 분포되는 모습을 AFM 이미지에서 확인하였다. 형성된 박막의 스텝 단차는 약 1 nm 또는 이 값의 정수 배였고, 이것은 Bi2Te3 unit cell의 quintuple layer (QL) 값과 일치하였다. 또한 측정된 XRD pattern으로 Bi2Te3가 hexagonal 구조의 c-축에 따라 결정성이 이루어졌음을 확인할 수 있었다. XPS 스펙트럼에서는 Bi 4f가 높은 에너지 방향으로 2.3 eV, Te 3d는 낮은 에너지 방향으로 약 0.7 eV 만큼 구속 에너지의 화학적 이동이 나타남을 알 수 있었다. 이러한 결과는 Si 위에 Bi2Te3 박막이 높은 결정성을 가지고 형성되었다는 것을 의미한다. 또한 Si (111) 기판보다 Bi2Te3 결정과 격자상수 불일치의 비율이 상대적으로 작은 Ge (111)을 기판으로 하여 Bi2Te3 박막을 성장시켜 두 표면에서의 박막 성장의 특성을 비교, 논의할 것이다.

• Composites Research
• /
• v.29 no.1
• /
• pp.33-39
• /
• 2016

In this study, geometric modeling and finite element analysis of 3-dimensional plain weave composite unit cell consisting of 3 interlaced fiber tows and resin pocket were performed to predict effective properties. First, tow properties were obtained from micro-mechanics finite element unit cell analysis, which were then used in the meso-mechanics analysis. The effective properties were obtained from a series of unit cell analyses simulating uniaxial tensile and shear tests. Analysis results were compared to the analysis and experimental results in the literature. Various crimp angles were considered and the effect on the effective properties was investigated. Initial failure strengths and failure sequence were also examined.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.244-244
• /
• 1997

The Janggunbong area(this study area) at the central-south part in the North Sobaegsan Massif, Korea, consists mainly of Precambrian(Wonnam and Yulri Formations)-Paleozoic [Joseon Supergroup(Jangsan Quarzite, Dueumri Formation and Janggum Limestone) and Pyeongan Group(Jaesan and Dongsugok Formations)] metasedimentary rocks and Mesozoic granitoid(Chunyang granite.) This study is to interpret geological structure of the North Sobaegsan Massif in the Jang-gunbong area by analysing rock-structure and microstructure of the constituent rocks. It indicates that its geological structure was formed at least by four phases of deformation after the formation of gneissosity(S0) in the Wonnam Formation and bedding plane(S0) in the Paleozoic metasedimentary rocks. The first phase deformation(D1) formed tight isoclinal fold(F1). Its axial plane(S1) strikes east-west and steeply dips north. Its axis (L1) subhorizontally plunges east-west. The second phase deformation(D2), which was related to ductile shear deformation, formed stretching lineation(L2) and shear foliation(S2). The sense of the shear movement indicates dextral strike-slip shearing(top-to-the east shearing). The third phase deformation(D3) formed open inclined fold(F3). Its axial plane(S3) strikes east-west and moderately or gently dips north. Its axis(L3) subhorizontally plunges east-west. The F3 fold reoriented the original north-dipping S1 foliation and D2 shear sense into south-dipping S1 foliation(top-to-the west shear sense on this foliation) at its a limb. The four phase of deformation(D4) formed asymmetric-type open inclined fold(F4) of NE-vergence with NW striking axial plane(S4) and NW-NNW plunging axis(L4). The F4 fold partly reoriented pre-D4 structural elements with east-west trend into those with north-south trend. Such reorientation is recognized mainly in the Paleozoic metasedimentary rocks.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.437-457
• /
• 2004

The geology of the Kualakulun in the Middle Kalimantan, Indonesia comprises Permian to Carboniferous Pinoh Metamorphic Rocks and Cretaceous Sepauk Plutonics of the Sunda Shield, late Eocene Tanjung Formation, Oligocene Malasan Volcanics, Oligocene to early Miocene Sintang Intrusives and Quaternary alluvium. Tanjung Formation was deposited in low-and high-sinuosity channel networks developed on the proximal to distal delta plain and delta front forming southward paleoflow system, which, in turn, gradually change into shallow marine environment. Four main deformational phases are recognized: D1, folding of metamorphic rocks accompanied by development of S1 schistosity under regional metamorphic condition; D2, ductile shearing in Cretaceous granitoids; D3, folding of metamorphic rocks accompanied by S2 crenulation cleavage; D4, faulting under N-S compressional regime during Tertiary times, producing NE-trending sinistral and NW-trending dextral strike-slip faults and N-S to NNE-trending normal faults.

• The Journal of Engineering Geology
• /
• v.13 no.2
• /
• pp.257-266
• /
• 2003

Jurassic granites of three sites, Pocheon, Geochang and Habcheon, were tested to investigate the effect of microcracks on Physical and mechanical properties of the granites. Fifteen oriented core specimens were used for the physical property test. The test result shows that porosity is almost proportioned to water content. P-wave velocity is the highest in the direction of axis ‘H’, intersection of two major microcrack sets and the lowest in the axis ‘R’, normal to the rift plane. Compressional strength tests were carried out for each core specimen taken parallel with axes ‘R’, ‘G’ and ‘H’, measuring strains. The results revealed a strong correlation between microcrack orientation and other mechanical properties such as rock strength.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.134-134
• /
• 2010

KBSI 부산센터에 건설중인 소형의 다중 양전하 중이온 가속기에 사용될 초전도 ECR 이온온은 최대 자기장 3 T, 최소 0.5 T의 자기 Mirror구조를 가지고 있으며 중심 부근의 1 T 자기장에서 28 GHz 전자공명에 의해 마이크로파의 에너지를 플라즈마로 전달한다. 최대 10 kW의 Gyrotron에서 TE02 모드로 발생하는 마이크로파는 모드변환기, 직류차단기 및 진공창을 통하여 플라즈마로 입사된다. 32.5 mm 지름의 원형 도파관에서 자기장 축방향으로 도입된 TE01 모드의 마이크로파를 Altar-Appleton-Hartree 분산관계식을 이용하여 군속도의 관점에서 살펴보았다. 플라즈마 밀도가 Cut-off에 근접하지 않는 한 마이크로파의 바깥 방향으로의 회절은 크지 않았으며, 전자공명 위치로 접근함에 따라 군속도의 방향이 바뀌어 오히려 중심 방향으로 향함을 알 수 있다. 즉 마이크로파가 플라즈마 챔버의 벽을 가열시킬 가능성은 크지 않은 것이다. 또한 뜨거운 전자 플라즈마의 Susceptibility를 이용하여 마이크로파의 플라즈마로의 전자 공명에 의한 흡수를 살펴본 결과, 운전 영역에 속하는 전자밀도가 제공되면 공명 지점에 이르기 전에 충분히 흡수되는 것을 확인하였으며, 이에 따라 챔버를 관통하여 인출부 벽에 충돌하는 마이크로파 에너지는 무시할 수 있을 것으로 보여진다. 이 결과들을 토대로 마이크로파 시스템을 설계 완료하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.3
• /
• pp.31-39
• /
• 2011

The flowfield in a solid rocket motor was simulated at the wall-injection test model, which has a fin-slot grain and submerged nozzle, and visualized by a smoke-wire. The high speed CCD camera captured the visualized images around the nozzle inlet through the grain center port. The vortical tube structure and circumferential flow patterns at the nozzle throat were visualized. The radial momentum transfer caused by the shear-interactions of slot-outlet flow, fin-base flow and grain port flow from upstream worked as the source of these phenomena.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.534-540
• /
• 1988

A study on the mixing process of fuel with ambient gas is necessary to verify combustion process of a diesel engine, especially the mechanism of its ignition delay. In this study, a single shot of diesel spray was injected through either a constant pressure injection system and bypass type injection system. Measurements were made on the flow characteristics of ambient gas and its time history using a hot wire anemometer and a high speed camera. The gas flow direction was determined by a smoke tracer method. (1) The ambient gas of spray flows away at the stagnation part where static pressure value is positive and flows in at the penetration part of a negative value with the steady entrainment length of 0.7. (2) The steady entertainment velocity around the spray in creases from the nozzle tip to the downstream, has the maximum value at the mixing boundary part, and represents zero at the stagnation boundary part after which the stream flows reversely at the stagnation part.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.1-8
• /
• 1987

Recently, as subway traffic have been increased, vibration of each parts of subway influence on structures above subway tunnel. This paper presents a new method to reduce which was generated by subway traffic. By comparing directional coherence relationship of X, Y, Z-axis and vibrational coherence relationship of spherical signal which was unified by three directional signals, effective vibration diminishing method was proposed. It can be found that locomotive vibration(specially 1-2Hz) have the worst effect on the vibration of structures and the vibration of subway box ranked 2nd, the vibration of earth ranked 3rd.