• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.205-212
• /
• 2020

The purpose of this study is to evaluate the validity of primary anterior zirconia crown made with Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) technology by analyzing fracture strength and translucency parameter. Zirconia crown was designed with CAD software, using 3D scanned data of #61 tooth model. Crown fabrication was performed with CAM machine using zirconia block. Zirconia crowns were divided into 3 groups according to thickness(0.3, 0.5, and 0.7 mm), and fracture strength was compared with 1.0 mm thickness of resin strip crown. The compressive force was applied with universal testing machine at 30° along the incisal edge at increments of 1 mm/min. For translucency evaluation, 0.3, 0.5, and 0.7 mm thickness of zirconia specimens were fabricated and translucency was measured with spectrophotometer. Among zirconia groups, there was a significant increase in fracture strength as thickness increased (p < 0.05). The fracture strength of zirconia crown was significantly higher than resin strip crown in all groups (p < 0.05). Translucency parameter was highest in 0.3 mm group, and significantly decreased as thickness increased to 0.5 and 0.7 mm (p < 0.05). Thin primary anterior zirconia crown can be designed and fabricated according to individual needs by using CAD/CAM. Restoration with thin crown would reduce the amount of tooth reduction, risk of pulp exposure, and make more esthetic restoration possible.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.886-888
• /
• 2001

배관의 덴트 및 주름의 형태 크기와 위치, buckle의 여부와 위치, 배관의 난형도 및 곡률을 파악하기 위해서 사용되는 Gemometry PIG의 캘리퍼 시스템에 Mechanical Finger를 back-yoke의 유무, 영구자석의 크기, Pin Hole의 위치와 영구자석의 위치 등을 3차원 비선형 유한요소법으로 해석한 후 이를 바탕으로 최적설계를 하여 이를 실제 제작하여 측정치와 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.702-706
• /
• 2007

본 연구에서는 실측 강수 자료를 적용하여 장기 지하수위의 변동을 수치모의하고, 그 결과를 관측정으로부터 측정된 실측 지하수위와 비교하였다. 모형의 구축은 제주도 한라산 중산간으로부터 해안까지 이르는 유역 면적 $310km^2$의 천미천 유역을 대상으로 하였으며, 2001년 11월 부터 2002년 10월까지 12개월간의 강우에 따른 지하수위의 변동을 평형상태로 해석하였다. 미국 지질조사국 (USGS) 에서 개발한 3차원 유한차분 해석 프로그램인 MODFLOW 모형을 선정하여 적용한 결과를 유역 내의 12개 관측정 측정수위와 비교하였으며, 대상지역에서 14.7m의 평균 오차와 21% 정규 실효치를 나타내었다. 향후 모형 구축 및 모의 결과의 신뢰도를 향상시키기 위해 격자수와 크기의 조절 및 공간적 분포에 따른 대수층의 투수계수와 저류계수의 민감도 분석을 수행하여야 할 것으로 판단되며, 계속 연구 수행 중에 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.108-110
• /
• 2013

GPS 신호에는 여러 가지 오차가 포함되어 사용자가 이를 그대로 이용할 경우 높은 정확도의 위치를 얻을 수 없다. 따라서 신호의 오차를 제거하고 높은 위치 정확도를 얻기 위하여 여러 가지 보정시스템들이 개발되어왔다. 그 중에서 광역보정시스템은 여러 개의 기준국 네트워크로부터 데이터를 수집하여 3차원 위성궤도 오차, 위성 시계오차, 서비스 지역의 전리층 지연 오차를 추정하여 사용자에게 보정정보를 제공한다. 사용자는 보정정보를 수신하여 자신의 위치에 맞는 오차정보를 계산하여 정확도를 높일 수 있다. 이러한 광역보정시스템의 성능은 기준국의 배치에 따라 차이를 보일 수 있으므로 적절한 기준국 선정을 위해서는 기준국 네트워크 변화에 따른 성능 분석이 필수적이다. 본 논문에서는 국토해양부 NDGPS 기준국 중에서 후보군을 선정한 후 시뮬레이션을 통하여 기준국 네트워크 변화에 따른 사용자 정확도, 가용성을 분석하였다. 그리고 실제 기준국에서 수집된 측정치를 처리하여 성능분석을 수행하였다.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.212-219
• /
• 2007

Objective: The purpose of this study was to provide an anatomical reference for cortical bone and soft tissue thickness, and the attached gingiva width in the mandible. Methods: Fifteen males and fifteen females participated in this study. An acrylic template was fabricated and the radiopaque markers were bonded on the estimated alveolar crest to take measurements of the hard and soft tissue thickness at the same locations. CT images were taken in samples wearing an acrylic template. Cortical bone and soft tissue thickness were measured at 2, 4, 6 and 8 mm from the alveolar crest in interradicular spaces from central incisor to first permanent molar. The attached gingival width was calibrated. Results: Cortical bone thickness was $1.33{\pm}0.38mm$ and soft tissue thickness was $1.49{\pm}0.54mm$. Cortical bone thickness was increased in the posterior area, while it was not the case for the soft tissue thickness. In addition, the total thickness was $2.82{\pm}0.70$. The attached gingival width was wider in the anterior area compared to that in posterior area. Conclusion: These results suggest that the attached gingiva width should be considered upon placement of mini-implants in the mandibular posterior area for orthodontic anchorage.

• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.51-51
• /
• 1995

인체 CAD 모델링 시스템은 장비와 인체를 모델링하여설계 초기단계에서 부터 별도의 Mock-up 없이 전 벙위의 운용자에 대한 작업자세의 안락도(Comfort), 동작한계(Reach), 적 합성(Fit), 시계(Vision)등 제반 작업공간 설계 및 평가에 수반되는 고려요소들을 보다 과학적 이고 합리적으로 반영할 수 있는 도구로 인식되고 있다. 본 연구는 크게 한국군 전차병의 인체 CAD 모델의 설계와 설계된 인체 모델을 활용한 한국형 전차 작업공간 평가로 구성되었다. 한국 군 전차병의 인체 CAD 모델링에서는 전차병의 인체 측정자료를 이용하여 5%, 50%, 95%치 전차병 에 대한 선 자세와 앉은 자세의 인체 모델을 설계하였으며, 보다 정확한 인체 모델의 구현을 위 해인체의 기능적 치수에 대한 실측치와 CAD 설계치와의 차이를 비교, 보정하여 줌으로써 작업공 간 평가시 보다 정확한 결과를 얻을 수 있도록 하였다. 한국형 전차 작업공간 평가에서는 설계 된 인체 모델과 한국형 전차 주요 구성품의 CAD 모델을 활용하여 각 승무원의 작업역을 분석하였고, 승무원 해치, 주요 조종장치의 운용 적합성, 판넬류 등의 위치 적합성에 대해 분석, 평가하였다. 본 연구를 통해 무기체계를 대상으로 하여 CAD 프로그램을 이용한 Man-Machine Interface에 대한 검토가 이루어 졌으며, 기존의 도면이나, Mock-up, Prototype에 의존하던 작업공간 타당성 검토가 CAD를 이용하여 3차원적으로 이루어 질 수 있는 기반을 마련하였다는데 의의가 있다.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.226-235
• /
• 2018

This study compares body types among the Korean, Northern Chinese and South Chinese women in their thirties. The subjects of this study are 30-39 year old females that consisted of 200 people from Southern China, 200 people from Northern China, and 202 people from Korea. The results are as follows. There are differences among Northern Chinese, Southern Chinese and Korean women. Korean women are taller than both regions of Chinese women, hip height measurement and waist height measurement of Korean women's are higher than Chinese women, it means that Korean women's lower body parts are longer than Chinese women. Northern Chinese women have the highest circumference measurements and depth measurements; however, Southern Chinese women have similar measurements with Korean women. The body type classification according to the GB/T 1335.2-2008 shows that Northern and Southern Chinese women have different body types. Southern Chinese women are mainly in "A body type" and Northern Chinese women are mainly in "B body type". The body type classification according to the KS K 0051 shows that Chinese women are all mainly "H body type", Korean women are mostly in "A body type". This study articulated specific differences in body types among Southern Chinese, Northern Chinese, and Korean women, especially between Northern and Southern Chinese women. This study provides basic data for Chinese female somatotype research and Korean fashion brands.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.555-561
• /
• 1995

This paper examines the applicability of the modified Borresen's coarse-mesh method(MBSN) to the core power distribution monitoring program development for the Yonggwang nuclear power plant unit 3(YGN 3) which uses fixed incore detectors for monitoring core power distribution. In so doing the modified Borresen's coarse-mesh equations are solved with core internal boundary conditions provided by the fixed incore detectors and three-dimensional core power distributions are com puted for the first-cycle core of the YGN 3 PWR. The results are compared with predictions of the COLSS(Core Operating Limit Supervisory System) which is the axial power shape monitoring program of the YGN 3. It is shown that the modified Borresen's method can reproduce the core axial power shape more closely than the COLSS. Because of other advantages in computing speed and predictive capability, n conclude that the proposed MBSN has a promising practical application for core power distribution monitoring program development.

• Journal of the Korean Magnetics Society
• /
• v.20 no.3
• /
• pp.94-99
• /
• 2010

Minor B-H loop measurement for a rectangular high tensile steel was obtained by using Labview. A ferrite cores of high permeance with primary and secondary windings on the steel plate were used to form a closed loop of magnetic flux. To compensate errors due to an extremely small gap between a pair of ferrite core, and between the ferrite core and the rectangular high tensile steel, quadratic function of least square method was used. Also a 3D FEM magnetic analysis tool was used to measure H and B of the steel. B-H loop of the high tensile steel plate can be measured up to 520 A/m of a magnetic field and 0.15 T of a magnetic flux density.

• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.73-78
• /
• 2012

Purpose: Understanding exactly detailed anatomy and morphology of scapula is very important for further surgical procedures. This study was intended to provide accurate anatomic and morphologic information of scapula by exactly measuring scapular thickness using computed tomography and reconstructing its geometric model. Materials and Methods: Eight average lengths and two angles of 102 scapular structures obtained from 51 cadavers were generally measured by computed tomography. Also, to measure the scapular thickness, sagittal planes of each scapula were divided almost equally and the thicknesses of each sagittal plane was measured by computed tomography. After measuring every thickness, average results were calculated and the gender difference was compared by Student t-test. Results: Average results of the thickness of glenoid fossa, lateral border, medial border, and the middle 1/3 portion of the scapular body were 22.4 mm, 13.83 mm, 4.44 mm and 2.06 mm, respectively. Also, male scapulars were found to be significantly thicker than female. Based on these measured thicknesses, we reconstructed the 3-dimensional geometric model of scapula. Conclusion: From these results, glenoid fossa and lateral border were the thickest part of scapula, while the middle 1/3 portion of the scapular was the thinnest.