• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.242-242
• /
• 2004

다양하게 변화하는 소비자의 요구에 만족하기 위해 제품 디자인의 빠른 변화가 요구되며 이에 따라 빠르게 3차원 형상을 구현하는 기술이 필요하게 되었다. 일반적으로 사용되는 적층 방식의 쾌속 조형기술은 고가의 재료비 및 운영비, 기능성 파트 제작의 어려움, 표면에 적층 무늬가 존재 등의 문제점이 존재한다. 그러나 기계 가공 방식의 경우 다양한 재료의 가공이 가능하고 높은 형상 정밀도가 유지되는 장점이 있다. 특히, 폼을 이용하여 3차원 형상을 구현하는 방법은 현업에서 많이 사용되고 있다.(중략)

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.217-236
• /
• 2006

In this study, the LCM was applied as the preliminary study for the cutterhead design of TBM and the drilling performance evaluation. The optimum cutting condition is obtained from the LCM tests and the effects of the design factors of IBM cutterhead, such as penetration depth and cutter spacing, on drilling performance are estimated. In this study, hence, to predict the accurate performance of TBM, instead of one-dimensional penetration depth applied in existing studies, three-dimensional cutting volume was quantified and measured. For this, the digital photogrammetry technique was applied to the LCM tests. Also, AUTODYN 2D was applied to investigate the applicability of the numerical analysis technique to simulate the cutting process of rock by the TBM disc cutter.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.724-727
• /
• 2000

Rapid Prototyping(RP)이란 3차원 솔리드 모델을 단면화한 뒤 하나씩 적층하는 가공방식을 총칭한다. 이때 단면화하는 방법에 따라서 uniform, adaptive slicing으로 나뉘며, 입력 모델에 따라서 direct slicing과 STL을 이용한 방식으로 나뉜다. 적층 방법에 따라서는 연속된 2D 윤곽을 기반으로 적층하는 vertical layer 방식과 인접한 두 개의 2D 윤곽들을 연결하며 만들어진 3D layer를 기반으로 가공하는 sloping layer방식으로 나뉠 수 있다. 현재 상용 RP 시스템들에서는 거의 모든 경우 vertical layer 방식이 채택되어 사용되고 있다. RP와 절삭 공정, 예를 들면 CNC 밀링의 장점을 효율적으로 결합하기 위해서는 임의의 복잡한 형상을 갖는 솔리드 모델을 정밀도에 제한이 없이 제조할 수 있어야 한다. 그러나 절삭 공정은 특별한 전문적 지식들을 필요로 한다 또한 상용 RP에서 사용하는 순차적인 적층 작업으로는 가공할 수 없는 형상들이 많다. 대표적인 것으로 지지대를 필요로 하는 형상들이 있다. 이러한 형상들을 지원하기 위해서는 복잡한 3D 형상을 절삭 가능한 형식으로 분할하는 것과 적층 가능한 순서대로 공정 계획하는 것이 필요하게 된다. 본 연구에서는 SDM에서 제시된 3D 분할 방법이 솔리드 모델을 기반으로 전개되어 STL file과 같은 삼각다면체 형식으로 근사화된 모델에 적용하기 어렵다는데 착안하여 STL file에서 읽어들인 삼각 다면체 모델을 가공 가능한 3D 형상으로 분할하는 알고리즘을 제시하고자 한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.139-152
• /
• 2008

A series of numerical experiments were carried out to simulate the rock cutting behavior by TBM disc cutter in a given took condition. AUTODYN-3D, a commercial program capable of simulating three-dimensional dynamic failure, was utilized to carry out the numerical tests over four different disc cutter spacing conditions. After modelling three-dimensional geometries of disc cutter and rock specimen, the linear cutting tests by a disc cutter were simulated for eight different types of rocks. The numerical result, that is the optimum cutter spacing for isotropic rocks had the good agreements with those from linear cutting test. However, for relatively anisotropic or jointed rocks, the specific energy obtained from the numerical tests was almost two-times bigger than the real linear cutting results. Therefore, to simulate cutting procedures for anisotropic rocks realistically, further studies would be necessary.

• CDE review
• /
• v.8 no.2
• /
• pp.47-52
• /
• 2002

레이저를 이용한 직접금속성형기술(영문명 : DMT: Direct Metal Tooling)은 고 부가가치의 기능성 소재(금속, 합금, 세라믹 등)의 미세한 분말을 원하는 3차원 공간상에 주사함과 동시에 이를 레이저로 직접, 순간 용착시키며 이것이 공간상에서 축적되가면서 미리 정해진 3차원 파트형상이 자동적으로 빌드업 되도록 하는 고도의 정밀제어 기술을 요하는 신기술이다. 이는 컴퓨터에 저장된 3차원 디지털 형상정보(digital data of 3D subjects)만 갖고 있으면 이로부터 그에 해당하는 금속파트형상을 적절히 소재분말을 이용하여 곧바로 실물로 재현하여 얻을 수 있게 됨을 의미하며 이로서 기존에 절삭기계를 이용한 가공 공법보다 손쉽고 빠르면서도 반면 기계적 성질은 종전기술보다 월등히 우수한 B차원 금속 파트나 금형 형상을 소재의 낭비가 전혀 없는 환경 친화적인 방법으로 제작할 수 있는, 소위 밀레니엄시대를 대표하는 최첨단 미래형 기술의 구현이다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.09a
• /
• pp.313-325
• /
• 2006

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.101-110
• /
• 1998

In process planning for 3D pocket machining, the critical issues for the optimal process planning are the generation of cutting layers and the tool selection for each cutting layers as well as the other factors such as the determination of machining types, tool path, etc. This paper describes the optimal tool selection on a single cutting layer for 2D pocket machining, the generation of cutting layers for 3D pocket machining, the determination of the thickness of each cutting layers, the determination of the tool combinations for each cutting layers and also the development of an algorithm for determining the machining sequence which reduces the number of tool exchanges, which are based on the backward approach. The branch and bound method is applied to select the optimal tools for each cutting layer, and an algorithmic procedure is developed to determine the machining sequence consisting of the pairs of the cutting layers and cutting tools to be used in the same operation.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.64-71
• /
• 1995

The objective of this paper is to realize an analysis system that is capable of controlling the quality of an entire cutting process by including a 3 coordinate measuring machine in the process line. Fuzzy reasoning networks based on fuzzy associative memories has been intro- duced in the measuring process, the control limits for the control process have been obtained, and the efficiency and reliability of the system have been determined by examining the simu- lated reasoning control values.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.73-79
• /
• 2013

In this study, NIMAX material has been processed using the three-dimensional measuring instrument and white light interferometer. they were tested to roundness and surface roughness and results are as follows: As for a cutting characteristic, it indicated that F4 showed a lower result than 2F showed due to the high hardness of the material and showed a good result when spindle rotation speed and tool feed were low. As for the measurement of roundness through 3-Dimensional measuring machine, it indicated that 4F showed a good result like the condition of cutting component and that roundness showed a good result when spindle rotation speed of 1,700 rpm and tool feed speed of 85 mm/min were applied. As for the surface roughness of processing surface, Surface roughness showed better 4F than 2F and conditions of spindle rotation speed 1,700 rpm, tool feed rate 55 mm/min showed good results in the Ra $0.4025{\mu}m$.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.2
• /
• pp.24-32
• /
• 1984

The object of the study is to discuss the effect of magic ink as a surface active substance on the mechanism of chip formation in oblique cutting. The Rehbinder effect has been known as a phenomenon that the mechanical strength reduces when the metal is coated with some surface active substances. In order to interpret these surface effects defined by Rehbinder, the influence on the shear strength of shear plane by coating surface active substances, cutting force by the depth of cut, surface roughness and hardness ratio were observed. The results are as follows: 1. By coating the magic ink on free surface of the forming chip, the effective shear angle increases, and the cuttinbg force and the deformed chip thickness decreases. 2. With the large inclination angle the effective shear angle increases, and the specific cutting force and the friction angle decrease. 3. Cutting of the coated surface improves the surface roughness and the hardness ratio drops, which means another Rehbinder effect.