• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.3
• /
• pp.163-168
• /
• 2003

Three-dimensional solid model has not been widely used in surgical prediction of orthognathic surgery because frequent artifacts from occlusal restorations or prosthesis limited the usefulness of simulated surgery involving occlusion. We prepared three-dimensional(3D) solid model from CT data and integrated the 3D solid model with dental cast using a face-bow transfer technique combined with skeletal reference measurement and confirmation with cephalometric radiographs. With this simple and easy method, it was possible to predict bony interference between the proximal and distal segment of the mandible so that we can prevent condylar displacement after sagittal split ramus osteotomy of the mandible with prominent asymmetry. The method error was within 2mm and it seemed to be useful in preoperative planning for maxillofacial surgery with maxillo-mandibular occlusal change.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.145-149
• /
• 2002

CORONA는 미국이 1960년에서 1972년까지 냉전시대 관심지역에 대한 첩보영상을 취득하기 위하여 운영한 영상취득시스템으로 1995년 일반에 자료가 공개됨에 따라 과거의 고해상도 영상자료를 이용할 수 있는 길이 열리게 되었다. 그러나 현재까지 CORONA 영상처리를 위한 모듈을 제공하는 원격탐측 소프트웨어가 개발되어 있지 않기 때문에 CORONA 영상을 이용하여 수치표고모형이나 정사영상을 제작하기 위해서는 적절한 모델링 방법이 필요하다. CORONA 영상은 파노라마 영상으로 필름 가장자리로 갈수록 왜곡이 많이 생기며 사진기 지표가 없고 위성의 궤도와 위치, 자세, 속도, IMC(Image Motion Compensation)에 대한 자세한 자료를 제공하지 않는 문제점이 있다. 따라서 본 논문에서는 지형복원을 위하여 지상기준점을 이용하는 2가지 모델링 방법을 이용하였다. 첫 번째는 파노라마 왜곡과 촬영 비행체 이동에 의한 왜곡, IMC에 의한 왜곡을 보정하는 모형식을 구성하여 이용하였으며, 두 번째는 위성과 센서에 대한 정보를 필요로 하지 않는 다항식비례모형(RFM; Rational Function Model)을 이용하였다. 대상지역은 서울지역의 입체영상으로 대략 $33km{\times}26km$ 지역이다. 영상은 지상해상도 약 2.7m로 스캐닝하였고 1:1000 수치지도를 통해 20개의 기준점과 36개의 검사점을 관측하였다. 검사점의 위치정확도를 평가해 본 결과 첫 번째 방법은 수평방향으로 평균 3.9m(X), 2.8m(Y)의 오차를 보였으며 표고의 경우 4.2m의 오차를 보여주었다. 두 번째 방법은 수평방향으로 평균 3.2m(X), 2.8m(Y)의 오차를 보였으며 표고의 경우 5.5m의 오차를 보여주었다. 지형복원 정확도를 검증하기 위하여 첫 번째 방법을 이용하여 대상지역 중 일부인 서울 남산지역에 대해 정사영상과 10m간격의 DEM을 제작하였으며 1:1000 수치지도를 통해 제작된 DEM과 비교한 결과 총 43990개 격자점의 표고 차이는 평균 5.98m였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2007

Recently, industrialization of a country is accelerated and request of society infrastructure is raised so national land development is activity view. Accordingly, the search for a wide-ranging buried heritage do acted in large construction region. Because the buried heritage get buried in land that it is necessary to the precision search and research for a record and a preservation. Until now, Surveying techniques of a historic site have made status map, profile and cross section map through leveling survey, total-station survey and sketch of specialist. So, to solve problems existing relic survey or drawing making method have using digital camera these researches rapidly and economically obtain stereo image of object and present a technique that constructs 3D image model for digital photogrammetry method. Also, these researches construct 3D image model for record and preservation of a historic site through site test and in 3D and graphical express a historic site and support works that produce other maps if we need it. offer base data of GIS (Geographic Information System) to collect and analyze overall, information of a historic site.

• Journal of Fashion Business
• /
• v.22 no.1
• /
• pp.135-147
• /
• 2018

Since the 20th century, there has been a growing interest in the new concept of fractals, a combination of mathematics and art, and the attempt to study the creative spatial aspects of the concept is being made. The purpose of this research is to examine artistic characteristics of fractal dimension and then analyze the types of fractal dimensions expressed in the fashion. Previous literature on fractals and dimension, and visual data on art and fashion collected over the Internet were used for analysis. Fractal dimension refers to the spatial concept of structural dimension of geometrical self-similarity. An analysis of the types of fractals seen in fashion revealed spatial expansion, the repetition in continual figures, superposition accordant to different sizes, and shades of different shapes. The aesthetic characteristics of fractal dimension appearing in fashions were examined based on analyses of fractal dimension types; the inherent characteristics of self-similarity, superimposition, and atypicality were found. Results obtained from this study are expected to be used as basic materials for the application of the design of fractal dimension into various perspectives of fashion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.345-345
• /
• 2020

우리나라는 물산업 강국 도약을 위한 글로벌 경쟁력을 갖추기 위해 2015년 세계물포럼 이후 복합 수재해 대응과 능동적 하천관리 분야가 중요시되고 있다. 기존의 하천관리는 수위관측소 및 하도계획을 중심으로 이루어져왔으나 최근에는 항공측량, 드론 등 원격관리시스템에 기반을 둔 하천 통로에 대한 입체적인 3차원 관리로의 인식 전환이 고려되는 추세이다. 대부분 수위 및 하도를 중심으로 한 조사방식은 계측장비, 인력, 시간 등 많은 소요비용이 필요하게 되어 급변하는 하천 공간 조사 기술로 제한적 요소가 많아 현재의 하천조사 시스템으로는 하천관리에 필요한 데이터를 환경변화에 맞추어 신속하고 정확하게 취득하기가 어려운 실정으로 하천관리 고도화를 위해 필요한 자료를 적기에 신속하고 효율적으로 구축할 수 있는 기술 개발 필요한 실정이다. 사회 환경의 발달로 급변하는 환경에 맞는 적정한 하천관리를 위해서는 유역 및 하천에 대한 수문정보 생산 및 하상변동조사가 필요하고 첨단기술(ICT)을 활용하여 조사의 효율성, 안전성 및 정확성을 높일 필요성이 있다. 한편, 하천유역조사는 하천유역에 대한 다양한 정보 수집을 목표로 하나 그간 유역조사에 대한 체계적인 연구가 이루어지지 않아 수요자의 요구 자료 제공이 미흡한 실정이다. 최근 수심, 하상, 하천재료 등 하천법에 규정된 측량은 현장 직접계측을 통해 실시되고 있으며 측량의 공간적·시간적 범위의 변동으로 기존 방식의 비용이 급증하게 되어 신기술을 통한 효율화가 필요한 실정이다. 현재 하천조사를 위해 위성 및 유인항공기 등 다양한 방법이 활용되고 있으나 고빙용을 수반하고 위성영상은 공간해상도가 낮아 폭이 좁은 하천에 적용하는데 한계가 있다. 또한, 폭이 좁고 길게 형성된 하천의 특성상 항공측량 보다 드론이 효율적으로 드론에 레이저 광선으로 지형을 측량하는 장비를 탑재해 3차원 지형을 측량하는 방법이 유리하다. 따라서 본 연구에서는 동진강 상류 하천을 대상으로 드론을 활용할 경우 투입인력 및 소요시간 절감, 장비 및 인력 진입 불가지역에 대한 정보획득, 높은 공간해상도, 항공측량 대비 경제성이 높은 것으로 판단되어 드론을 활용하여 하천지형 모니터링을 실시하여 유역관리 및 수질모델링에 필요한 지도 생성 및 유역의 공간 정보를 획득하여 향후 유역관리 모형의 기초자료로 활용하고자 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.29-38
• /
• 2015

In this study, track dynamic interaction characteristics caused by the vehicle running through transitional section such as bridge abutments were studied using the finite element analysis program. The geometric condition of track was generated by trigonometric function and allowable maximum track irregularity is determined by KORAIL track maintenance criteria. The sub-infrastructure under rail fastener system was modelled by 3D solid elements. To reduce computational cost only half track line is numerically considered and the roller boundary condition was applied to each side of model. In this study, the vehicle-track dynamic interaction analysis was carried out for standard Korean transition section of concrete track and the dynamic behaviors were investigated. The dynamic characteristics considered are wheel load variation, vertical acceleration at body, and maximum Mises stress at each part of transitional section.

• The Journal of the Korean dental association
• /
• v.22 no.7 s.182
• /
• pp.607-620
• /
• 1984

The validity of the Kinesiegraph (MHG-5R) output was studied using a non-ferromagnetic positioning device within working range of a 3 cm wide by 4 cm deep by 5 cm high three dimensional lattice. To determine how well observed values of the M K G outputs may predict case values of actual measurements, relationships between those values were tested by viewing scatter plots and correlation between observed values and actual values. In order to devise some form of served values of the M k G outputs (volts), statistical regression analysis was performed. The statistical analysis showed that observed values and actual values were strongly correlated. However, high correlation does not necessarily mean perfect predictability of given linear models. The formulated models were not able to predict all of acutal values this is partly 엳 새the discreteness of dependent variables (actual values) and also is because of independent nature of observed values. In conclusion, unless the Kinesiograph is suitably modified, the inherent nonlinearity characteristic of the system output limits its application to the measurement of a limited range of jaw movements.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.139-144
• /
• 2013

This paper is an exploratory study to improve customer satisfaction survey for resolving practical problems. It is natural phenomenon that, as the level of customer satisfaction index increases, the ratio of satisfied customers increases too. However, the effectiveness of practical application of customer satisfaction survey for improvement of customer satisfaction decreases due to its structural limitation on its data analysis system. In order to cope with these problems, we compares the three satisfied customer reclassification methods such as attribute complex scores, satisfaction/dissatisfaction dimension and latent class analysis models. The case study results show that satisfied customer reclassification methods have merits and demerits and are expected to play the role as the groundwork for the revitalization of customer satisfaction survey as well as improving customer satisfaction management.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.183-196
• /
• 1998

The Synthetic Aperture Radar(SAR) image and the Digital Elevation Model(DEM) of an target area are put into use to generate three dimensional image map. An method of image map generation is explained. The orbit and attitude determination of satellite makes it possible to model signal acquisition configuration precisely, which is a key to mapping image coordinates to geographic coordinates of concerned area. An application is made to RADARSAT in the purpose of testing its validity. To determine the orbit, zero Doppler range is used. And to determine the attitude, Doppler centroid frequency, which is the frequency observed when target is put in the center of antenna's view, is used. Conventional geocoding has been performed on the basis of direct method(mapping image coordinates to geographic coordinates), but in this reserch the inverse method(mapping from geographic coordinates to image coordinates) is taken. This paper shows that precise signal acquisition modeling based on the orbit and attitude determination of satellite as a platform leads to a satellite-centered accurate geocoding process. It also shows how to model relative motion between space-borne radar and target. And the relative motion is described in ECIC(earth-centered-initial coordinates) using Doppler equation and signal acquisition geometry.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.147-159
• /
• 2010

The touch screen phone launched domestically in Korea, unlike the existing plane UI, it applied a cubic shape of 3D UI which provides three dimensional solid graphic. This study proposes to examine the correlation between the users' experience of 3D GUI, which were made by two different companies, and the brand. From this point of view, this study sets up a hypothesis about intimate correlation between individual differentiated brand and the user experience. Base on that, a model was designed. This study measured the satisfaction of user experience through the disclosure and non-disclosure of brand, focusing on 3D GUI cases which were launched so far, and it demonstrated that there was a clear difference in the degree of satisfaction. Through this examine, a brand was confirmed as one of the important element of user experience in using the 3D GUI that was launched competitively by companies. Therefore, the result of this study suggest that the designers need to establish strategies that make the brand as the core subject of design during the process of manufacturing product and service.