• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.235-243
• /
• 2010

Three-dimensional structural analysis system for nuclear containment building is presented in this paper. This system includes high-performance plate/shell elements as finite element library. It also adopts numerical modeling technique for unbonded tendon as well as bonded tendon in prestressed concrete structures. This system is constructed by connecting several in-house program to a commercial program DIANA, and then is capable of performing nonlinear analysis for ultimate pressure capacity of nuclear containment building. Finally, three-dimensional structural analysis of CANDU-type containment building is carried out in order to test the reliability of this system. These numerical results are compared with reference values, which obtained from axisymmetric structural analysis.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.78-84
• /
• 2008

This paper presents a fast modeling technique of virtual pottery using force feedback based on a circular sector element method. Previous techniques for simulating deformable objects such as finite element method (FEM) are limited in real-time haptic rendering due to their complexity and expensive computational cost. In our model, circular sector elements which fully represent features of pottery's shape are closely gathered and piled together. This allows efficient deformable object modeling through a decrease in the number of elements and reducing computational cost.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.7-15
• /
• 1994

The two-dimensional elastoplastic analysis was peformed to reveal a detail residual stress distribution of ceramic/metal joint specimen using finite element method and X-ray method. The highest tensile residual stress, ${\sigma}_x$ perpendicular to the interface appeared at the edge of the ceramic near the interface. In the vicinity of the interface, the high stress concentration occurs and residual stress distributes three-dimensionally. Therefore, the measured stress distribution differed remarkably from the result of the two-dimensional finite-element analysis. Especially at the center of the specimen near the interface, the residual stress, ox obtained from the finite element analysis was compressive, whereas X-ray measurement yielded tensile ${\sigma}_x$. Therefore, it is also attempted to investigate the finite element model for the prediction of residual stress ${\sigma}_x$ distributed nearly the interface of joint.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.293-300
• /
• 2013

In this study we proposed a simplified finite element model of anchor bolt system inserted through concrete structures considering clamping forces. The three different finite element types using LS-DYNA are applied for numerical efficiency of the anchor bolt modeling. Combined beam and solid elements are used to reflect the tension state at internal part of anchor bolt due to torques. The clamping forces due to torques are considered by introducing a compression for a nut plane modeled by beam elements. The numerical examples show good agreement with different element types. Parametric studies are focused on the various effects of different element types on the induced axial and shear forces of anchor bolts considering clamping forces.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.35-43
• /
• 2003

In this paper, an efficient computational algorithm for the implementation of the newly proposed node activation technique is presented, and its computational aspects are thoroughly investigated. To verify the validity, convergence, and efficiency of the node activation technique, various numerical examples are worked out including the problems of Poisson equation, 2D elasticity problems, and 3D elasticity problems. From the numerical tests, it is verified that one can arbitrarily activate and handle the nodal points of interest in finite element model with very little loss of the numerical accuracy.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.634-637
• /
• 2010

본 논문은 미세구조의 마이크로 액추에이터의 구동해석을 위한 결과로써 3차원 유한요소해석(Finite Element Analysis, FEA)을 이용하여 수행하였다. 마이크로머신과 같은 미소구조물을 해석하는 경우, 컴퓨터의 메인 프로세스에 비해 프리프로세서(pre-processor)의 비중이 높아지고 있어 그 효율화가 가장 중요하다. 수작업에 의존해야 했던 지난날의 요소분할법 기술은 최근에 들어 여러 연구자들에 의해 개발되고 있다. 특히, 복합현상을 다루는 정전 액추에이터에 직접적인 적용에 다소 어려움이 있는데 3차원적인 수치 및 실험평가는 실용적인 문제에서 비추어 볼 때 매우 중요하다. 따라서 본 논문에서는 센서로서의 역할을 하는 마이크로 정전 액추에이터의 기본설계를 위한 토대를 구축하고자 3차원적인 FEA 시뮬레이션을 수행하여 미세 회전운동을 분석하였다. 그 결과 설계된 모델에서 먼저 자중해석과 Mode 해석에서 기준치를 모두 만족하였다. 또한 설계된 액추에이터의 형상에 따른 회전자의 변형해석을 수행하여 시작토오크와 탄성한계까지의 위치제어에 필요한 회전각을 구하였으며, 정전장 해석을 통하여 시작토오크는 전압 $V^2$에 비례함을 알 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.213-214
• /
• 2006

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1117-1125
• /
• 2013

A finite element based approach that can be used to investigate the plane-view shape and crop loss of a material during plate rolling is presented. We employed a three-dimensional finite element model to continuously simulate the shape change of the head and tail of a plate as the number of rolling passes increases. The main feature of the proposed model lies in the fact that the multistage rolling can be simulated without a break because the rolling direction of the material is reversibly controlled as the roll gap sequentially decreases. The material constants required in the finite element analysis were experimentally obtained by hot tensile tests. We also performed a pilot hot plate rolling test to verify the usefulness of the proposed finite element model. Results reveal that the computed plane-view shapes as well as crop losses by the proposed finite element model were in good agreement with the measured ones. The crop losses predicted by the proposed model were within 5% of those measured from the pilot hot plate rolling test.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.169-177
• /
• 2002

We develop the weighted-averaging finite-element method which uses four kinds of element sets. By constructing global stiffness and mass matrices for four kinds of element sets and then averaging them with weighting coefficients, we obtain a new global stiffness and mass matrix. With the optimal weighting coefficients minimizing grid dispersion and grid anisotropy, we can reduce the number of grid points required per wavelength to 4 for a $1\%$ upper limit of error. We confirm the accuracy of our weighted-averaging finite-element method through accuracy analyses for a homogeneous and a horizontal-layer model. By synthetic data example, we reconfirm that our method is more efficient for simulating a geological model than previous finite-element methods.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.295-302
• /
• 2006

In this study, computational structural dynamic analyses of a gyrocopter have been conducted considering unsteady dynamic hub-loads due to rotating blades. 3D CATIA models with detailed mechanical parts we constructed and virtually assembled into the complete aircraft configuration. The dynamic loading generated by rotating blades in the forward flight condition are calculated by a commercial computational fluid dynamics (CFD) code such as FLUENT. Modal based transient and frequency response analyses are used to efficiently investigate vibration characteristics of the gyrocopter. Free vibration analysis results for different fuel and pilot conditions, frequency responses and transient responses for critical flight conditions are also presented in detail.