• Explosives and Blasting
• /
• v.38 no.2
• /
• pp.1-12
• /
• 2020

Digital Image Correlation is a well-established method for displacements, strains and shape measurements of engineering objects. Stereo-camera 3D Digital Image Correlation (3D-DIC) systems have been developed to match the specific requirements for measurements posed by material and mechanical industries. Although DIC method provides the capabilities of scaling a field-of-view(FOV), dimensions of Geotechnical structure objects in many cases are too big to be measured with DIC based on a single camera pair. It can be the most important issue with applying 3D DIC to the measurement of Geotechnical structures. In this paper, We were present stereo vision conditions in a 3D DIC system that can be measured for large FOV(30×20m) and high precisions(z-displacement 0.5mm) of the ground objects with Stereo-camera DIC systems.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.17-23
• /
• 1999

본 논문에서는 절리면 거칠기를 정밀하게 수치화 하기 위해 레이저 변위계를 이용한 3차원 거칠기 측정기를 구동시키는 프로그램 제작 및 여러 가지 상태의 절리면에 대해 수치화를 실시하여 각종 거칠기 파라미터를 결정한 후 오차분석을 실시하여 이 기계를 이용한 측정의 타당성을 검증하였다. 동일한 절리면에 대해 물리적인 접촉에 의한 3차원 거칠기 측정기로부터 얻어진 거칠기 파라미터와 레이저 변위계를 이용한 측정기로부터 얻어진 것들 사이의 관계를 살펴보았고, 레이저 측정기에 의해 수치화된 절리면 거칠기 파라미터 사이의 상관관계를 조사하였다. 연구에 사용한 시료는 황등화강암, 여산대리석의 2종류이며, 절리형상 측정을 위한 절리는 인장균열 발생장치를 이용하여 인공적으로 제작하였다. (중략)

• The Journal of Engineering Geology
• /
• v.6 no.3
• /
• pp.111-118
• /
• 1996

In general, a three dimensional ground behaviour during tunneling is simulated by using two dimensional analysis programs in consideration of a certain ratio of stress or strain distribution to take into account the effect of construction stage by a tunnel face advance. A series of trree dimensional analyses was conducted to deduce a normalized displacement (surface or crown settlement) curve in longitudinal direction, of which curve is reflecting an effect of a tunnel advance under a various condition. And, by using try and error technique, two dimensional analyses were carried out to determine an optimum stress distribution ratio for a settiement curve coincided with the curve obtained by three dimensional analyses. Finally, monitored results from a subway tunnel were compared with two dimensional analysis results for varification of the deduced stress distribution ratio as well as the two dimensional analysis program employed in this study.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.727-730
• /
• 2011

본 논문에서는 3차원 자기부상열차에 대한 열차-가이드웨이 상호작용 해석기법을 제시하고자 한다. 수직 및 수평방향 변위, 피칭, 롤링 그리고 요잉에 대한 자유도를 각 보기와 차체에 대해 고려하여 총 25자 유도 자기부상열차에 대한 운동방정식을 유도하였다. 제어방식으로는 UTM01에 적용된 제어기법을 이용하였고, 궤도 틀림을 고려하기 위하여 미국 FRA에 적용하고 있는 궤도 불규칙성에 대한 밀도 스펙트럼 함수를 이용하여 조도를 생성하였다. 같은 조건하에 2차원 모델과 3차원 모델의 동적응답 결과를 비교하여 타당성을 확인하였고, 2차원 모델에서 고려할 수 없는 수평방향 조도를 도입하였을 때 수직방향 부상공극에는 두드러진 영향을 미치지 않았으나, 수평방향 부상변위에 있어서 중요하게 작용함을 확인하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.6 s.40
• /
• pp.45-54
• /
• 2004

Recently, as steel structures become higher and more long-spanned, application of high-strength steels is increasing gradually. For seismic design of steel structures using high-strength steels(POSTEN60, POSTEN80), analytical method, can describe the large deformation and inelastic cyclic behavior generated by non-proportional cyclic loading, are required. In this paper, cyclic plasticity model was proposed by results of monotonic loading tests ant cyclic loading tests. Three-dimensional finite element analysis is developed by using proposed model and finite deformation theory and verified as compare with experiment result. Using 3-dimensional elastic-plastic finite deformation analysis, seismic analysis of high-strength steel pipe-section piers are carried out. Also, seismic performance of high-strength steel pipe-section piers in parameter of diameter-thickness ratio was clarified.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.131-139
• /
• 2013

The aim of this study was to evaluate the variation which based on Celiac axis and SMA using by CT volume rendering images. 613 patients underwent abdominal CTA, there were 552 patients (99.05%, TypeI, II) with normal anatomical form and 61 (9.95%, Type III~XII) with variation. TypeI was 339(55.31%), Type II was 213 (34.74%), Type III was 18 (2.93%), Type IV was 12 patients (1.95%), Type V was 11 patient (1.79%), Type VI was 9 patients (1.46%), Type VII was 6 patients (0.97%), Type VIII was 1 patient (0.16%), Type IX was 1 patient (0.16%), Type X was 1 patient (0.16%), Type XI was 1 patient (0.16%), and Type XII was 1 patient (0.16%) into totally new types of variation. In conclusion, we could found 9 new types of variation by classifying based on celiac axis and superior mesenteric artery. These results were considered to be an important opportunity for a new vessel map.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2015

Several sensor systems are used to estimate and predict the slope behaviors, however though slope sensing systems are much up-to-dated compared to before, they are mainly focused on the hardware developing. It means the analyzing software is deficient to apply the examining slope behavior for slope stability. In real case, slope behavior shows the 3-dimensional movement and failure; however the modeling methods for 3-D behavior are more difficult and need more variables. 1-D analysis shows only the length variation, however the real slope makes the 3-D behaviors. To fix the 3-D space coordinate, three values should be determined such as length, horizontal angle and vertical angle. Therefore if the 3-D coordinate system were composed by the points considered of two directions and length, the 3-D space could be separated into horizontal plane and vertical plane. The data from DY-slope in Chungbuk province was analyzed to the developed 3-D coordinate system. It is concluded from the results of 3-D analysis, the slope is generally moving to transverse direction, also the displacements are happening to road and vertical direction at the same time. Presently, the accumulated displacement between sensing points shows small value within 4.3 cm, and the displacements of all sensing points show the similar directions and magnitudes.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.3
• /
• pp.297-308
• /
• 2001

We propose an algorithm which can reconstruct the 3D information from geographical information. The conventional techniques, the triangular patches and the Random Fractal Midpoint Displacement (RFMD) method, etc., have often been used to reconstruct natural images. While the RFMD method using Gaussian distribution obtains good results for the symmetric images, it is not reliable on asymmetric images immanent in the nature. Our proposed algorithm employs neural networks for the RFMD method to present the asymmetrical images. By using a neural network for reconstructing the 3D images, we can utilize statistical characteristics of irregular data. We show that our algorithm has a better performance than others by the point of view on the similarity evaluation. And, it seems that our method is more efficient for the mountainous topography which is more rough and irregular.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.3
• /
• pp.185-193
• /
• 2002

In this paper, deformation behavior of shallow subway tunnel excavated in weathered soil and reinforcement effects of longitudinal support measures are investigated via three dimensional FDM analysis. Two excavation methods, half-face excavation and full-face excavation, are considered in simulation to study the influences of excavation methods on tunnel deformation behavior. In addition, the reinforcing effects of RPUM and fiberglass pipe are compared. Face extrusion, covergence, preconvergence, and sidewall displacement are investigated to analyze tunnel deformation behavior, and surface settlement is used to analyze the effects of excavation methods and longitudinal supports measures. The simulation results show that half-face excavation induces larger convergence, preconvergence, sidewall displacement, surface settlement than full-face excavation, while full-face excavation induces larger extrusion than half-face excavation. In addition, under same excavation method, all displacements are larger when RPUM is only used for longitudinal support than when RPUM is jointly used with fiberglass pipes.

• Journal of Conservation Science
• /
• v.22
• /
• pp.31-42
• /
• 2008

A stone cultural heritage often lacks design drawing and detailed geometric informations, thus it becomes more difficult to conservation and restoration. Even though there is active database of detail shape information and numerical measurement for stone monuments, most of the data is in hard-to-utilize two-dimensional images. The new technology developed to overcome this problem is three-dimensional image scanning system. The multi-storied stone pagoda of the Daewonsa temple was analysed with 3D scanning image data then survey map with orientation displacement was evaluated. The difference of each side became apparent with the members of the stone properties was measured, also horizontal and vertical displacement occurred. Horizontal displacement occurred in increasing severity from left to right and from body section to upper part. The 8th roof stones are leaning toward northwest direction due to lateral displacement. The evaluation and measurement of displacement could cause a little errors due to the characteristics uneven surface of stone monuments, computer program and mistakes from the researcher. In future, more precise measurement and stability studies should be done to suggest that accurate data for conservation and understanding of damage condition can be provided.