• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.17-23
• /
• 1999

본 논문에서는 절리면 거칠기를 정밀하게 수치화 하기 위해 레이저 변위계를 이용한 3차원 거칠기 측정기를 구동시키는 프로그램 제작 및 여러 가지 상태의 절리면에 대해 수치화를 실시하여 각종 거칠기 파라미터를 결정한 후 오차분석을 실시하여 이 기계를 이용한 측정의 타당성을 검증하였다. 동일한 절리면에 대해 물리적인 접촉에 의한 3차원 거칠기 측정기로부터 얻어진 거칠기 파라미터와 레이저 변위계를 이용한 측정기로부터 얻어진 것들 사이의 관계를 살펴보았고, 레이저 측정기에 의해 수치화된 절리면 거칠기 파라미터 사이의 상관관계를 조사하였다. 연구에 사용한 시료는 황등화강암, 여산대리석의 2종류이며, 절리형상 측정을 위한 절리는 인장균열 발생장치를 이용하여 인공적으로 제작하였다. (중략)

• Tunnel and Underground Space
• /
• v.12 no.4
• /
• pp.268-276
• /
• 2002

In this study, a 3D coordinate measurement system equipped with a laser displacement meter for digitizing rock joint surface was established and the digitized data were used to calculate several roughness parameters. The parameters used in this study were micro avenge inclination $angle(i_{ave})$, average slope of joint $asperity(SL_{ ave})$, root mean square of $i-angle(i_{rms})$, standard deviation of height(SDH), standard deviation of $i-angle(SD_i)$, roughness profile $index(R_P)$, and fractal dimension(D). The relationships between the roughness parameters based on the digitzation of the surface profile were analyzed. Since the measured value varied according to the degree of reflection and the variation of colors at the measuring point, rock joint surface was painted in white to minimize the influence of the surface conditions. The comparison of the measured values and roughness parameters before and after painting revealed the better consequence from measurement on the painted surfaces. Also, effect of measuring interval was studied. As measured interval was increased, roughness parameters were exponentially decreased. The incremental sequence of degree of decrease was $SDH\; i_{ave},\; i_{rms},\; SD_i,\;and\; R_ p-1$. As a result of comparison of parameters from pin-type measurement system and laser type measurement system, all value of parameters were higher when laser-type measurement system was used, except SDH.