• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.81-86
• /
• 2008

I present a 3-D profiler specially devised for the profile measurement of specular surfaces that requires precision shape accuracy up to a few nanometer. A profile is reconstructed from the curvature of a test part of the surface at several locations along a line. The local curvature data are acquired with White-light Scanning Interferometry. Test measurement proves that the proposed profiler is well suited for the specular surface inspection like precision mirror.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.47-52
• /
• 2008

We present a 3-D profiler specially devised for the profile measurement of rough surfaces that are difficult to be measured with conventional non-contact interferometer. The profiler comprises multiple two-point-diffraction sources made of single-mode optical fibers. Test measurement proves that the proposed profiler is well suited for the warpage inspection of microelectronics components with rough surface, such as unpolished backsides of silicon wafers and plastic molds of integrated-circuit chip package.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.3-7
• /
• 2000

The authors have realized reconstruction of 3D shape using contacting method with pins and TCP/IP communication. In this paper, the working principal of the mechanism is proposed and tested. A special sensor system is designed as 148 matrix form to measure 3D shape. When contact occurs between pin and the plate of the sensor matrix, the position information of pins is sent to computer and raised height data of the pin is obtained by counter which accumlates encoder signal. So, all datum which contain 3-dimensional coordinate, is transferred using TCP/IP communication. Finally, 3D shape is reconstructured by Web browser of remote computer. The measuring result shows that the proposed mechanism is reliable and promising as a remote measuring device through Internet.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.160-166
• /
• 2002

In this paper, data acquisition and analysis of a measuring machine for marine engine's cams is discussed. A rotary encoder and linear scale of the machine to measure angular and linear displacement respectively are interfaced to the PC via encoder board with 2 channels. The design and measuring data are interpolated by cubic spline curves to compute the precision error which is defined by the maximum and minimum distances between two curves. The minimum zone fit of ISO is employed to evaluate the geometric deviation. The developed system takes only 5 minutes to measure and analyze while the CMM takes over 1 hours even with a skilled operator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.150-153
• /
• 1997

In this paper, a control and data analysis S/W of a dedicated measuring machine for cams is developed. A rotary encoder is employed to measure the angular displacement of the motor, and a linear scale does the linear displacement of the prove. The design and measuring data are interpolated by cubic spline curves respectively to compute the error which is defined by the maximum distance between two curves. Further, optimization module to find the exact error is also developed to remove the error occurred due initial measuring position. The developed system takes only 6 minutes to measure the cam and to analyze the measuring data while the CMM takes about 1 hours even with a skilled operator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.836-839
• /
• 2004

Qualitative elevation of products is very important Part. A business racking us brains to find for qualitative elevation of products. Recently, measurement accuracy of a non-contact 3D scanner has been rapidly improving. As a result, the number application cases of non-contact 3D scanners are increasing. A non-contact 3D scanner is capable of measuring a curved surface rapidly and has high resolution. It is more affordable and potable than the CMMs, It is therefore expected to be applied more frequently in more diverse industries. Automating the measuring process using a non-contact 3D scanner and developing a technology, which allows a user to measure easily, will eventually improve the quality of products. As their inspection and analysis processes improve.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.86-86
• /
• 2023

최근에 들어 환경보전과 지속가능한 하천관리의 중요성이 대두되고 있으며, 통합물관리에 있어 수리량과 수질을 연계한 통합 모니터링의 필요성이 커지고 있다. 수리량과 수질 분야에 대한 모니터링 기술은 지속적인 연구가 이루어져 왔으나, 각 분야의 개별적 연구로 인해 수리량과 수질을 통합하여 모니터링 하는 기술 개발은 미흡한 수준이다. 또한 수질 측정은 수질오염공정시험기준에 있는 채수 기준에 따라 채수하여 측정하고 있으며, 채수 지점은 하천의 수심별로 달리하여 정해진다. 수리 측정은 현장계측을 통한 2차원적 계측으로 진행하고 있어 수질 측정 시 채수지점과 수리 측정지점은 일치하지 않는다. 동일 지점에서의 수질과 수리량을 동시에 고려하고 있지 못한 모니터링은 본류와 지류의 혼합거동이 많은 국내 하천 특성을 반영하지 못한다. 또한 현재의 수질·수리 모니터링은 ADCP나 다항목수질측정기 같은 고가의 장비를 운영하며, 홍수기와 같은 고위험 계측 조건에서 인력을 통해 측정하고 있기에 고비용의 장비운영비와 인명 피해를 야기시키고 있다. 따라서 무인 원격 기술을 적용한 하천 모니터링 기술과 수질과 수리량의 데이터 연계를 통한 3차원 모니터링 기술의 확보는 하천관리에 있어 매우 필수적이다. 본 연구에서는 수중 무인 원격이동체인 ROV와 무인 원격이동체(USV)를 활용한 3차원 수질·수리 모니터링 기술 개발에 관한 연구를 수행하였다. 국내 하천 특성을 고려한 혼합거동을 분석하기 위해 ROV에 수중 GPS 장비와 수질센서를 부착시켜 수중 내 2차원으로 측정되는 수리량과 동일한 좌표를 가지는 수질자료를 계측하여 하천의 연직 분포와 수평적 분포를 통해 화학적 수리적 거동을 분석하여 하천의 3차원 혼합거동 양상을 판단할 수 있었다. 이와 같은 무인 원격이동체를 통한 3차원 수질·수리 모니터링 기술은 하천의 3차원 분석에서 수질·수리량 보간 자료로 활용 가능하며, 효율적인 모니터링을 통하여 하천 전반 및 통합물관리에 있어 크게 기여할 것이라 사료된다.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.433-435
• /
• 2005

광변환 물질을 사용하여 X-선이나 감마방사선을 가시광으로 변환한 다음 CCD 카메라를 통하여 광량을 측정하면 방사선의 양을 간접적으로 측정할 수 있다. 본 연구에서는 CCD형 비상대용 로봇용 고속 삼차원 방사선 위치 탐지장치에서 방사선 위치 센싱의 핵심 역할을 수행하는 CCD 방사선 탐지부를 간접 방사선 측정 방법을 응용하여 고안하고 구현한 다음 이에 대한 방사선 특성시험을 수행하였다. 시험 결과로 부터 구현한 CCD형 방사선 센서가 방사선 위치 및 선량 탐지장치로 활용 가능성이 충분함 확인하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1595-1607
• /
• 2005

Three-dimensional(3-D) body scanners used to capture anthropometric measurements are now becoming a common research tool far apparel. This study had two goals, to test the accuracy and reliability of 3-D measurements of dynamic postures, and !o analyze the change in upper body surface measurements between the standard anthropometric position and various dynamic positions. A comparison of body surface measurements using two different measuring methods, 3-D scan measurements using virtual tools on the computer screen and traditional manual measurements for a standard anthropometric posture and for a posture with shoulder flexion were $-2\~20mm$. Girth items showed some disagreement of values between the two methods. None of the measurements were significantly different except f3r the neckbase girth for any of the measuring methods or postures. Scan measurements of the upper body items showed significant linear surface change in the dynamic postures. Shoulder length, interscye front and back, and biacromion length were the items most affected in the dynamic postures. Changes of linear body surface were very similar for the two measuring methods within the same posture. The repeatability of data taken from the 3-D scans using virtual tools showed satisfactory results. Three times repeated scan measurements f3r the scapula protraction and scapula elevation posture were proven to be statistically the same for all measurement items. Measurements from automatic measuring software that measured the 3-D scan with no manual intervention were compared with the measurements using virtual tools. Many measurements from the automatic program were larger and showed quite different values.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.207-212
• /
• 1997

The purpose of this study is the development of CAM system which can cut and measure any shape by machining center and coordinate measuring machine. The overall goal of the CAM system is to achieve the CNC machining, from digitizing through to final cutting. The hardware of the system comprises PC and machining center, CMM. There are three steps in the CNC machining, (1) workpiece measuring on the CMM, (2) geometric modeling by the CAD system, (3) NC commands generation by the tool path compensated for tool nose radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.